1. Safety Information
Disclaimer:
Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
Important EU Regulations Notice:
EU regulations limit electric bicycles to 25 km/h (assisted speed) on public roads, sidewalks, parks, and other public areas. This product is equipped with a built-in speed limit to comply with these requirements. Higher speed settings (up to 35 km/h) are intended only for use on private property. Always drive responsibly and enjoy your EB3S safely.
- Always wear a helmet and appropriate safety gear when riding.
- Perform a pre-ride safety check before each use, including brakes, tires, and lights.
- Familiarize yourself with local e-bike laws and regulations.
- Do not operate the e-bike under the influence of alcohol or drugs.
- Avoid riding in adverse weather conditions or on slippery surfaces.
2. Package Contents
Upon unboxing, please ensure all the following items are present:

Figure 2.1: Accessories Overview
- Front Wheel x1
- Quick Release Skewer x1
- Saddle x1
- Left Pedal x1
- Right Pedal x1
- Double Fork Wrench x5 (various sizes)
- Battery Key x2
- Pump x1
- Charger x1
- User Manual x1 (this document)
3. Parts Diagram
Familiarize yourself with the main components of your iScooter EB3S electric bicycle:

Figure 3.1: Product Details and Labeled Components
- Charging port
- Battery
- Headlight
- Mudguards
- Tire
- Suspension fork
- Disc brake
- Pedal
- Saddle
- Taillight
- Kickstand
4. Assembly and Initial Setup
4.1. Unpacking
Carefully remove all components from the packaging. Keep the packaging materials in case you need to transport or return the bicycle.
4.2. Front Wheel Installation
Attach the front wheel to the front fork using the quick-release skewer. Ensure the wheel is centered and securely fastened.
4.3. Handlebar Installation
Mount the handlebars onto the stem. Adjust the angle and tighten the bolts securely. Ensure all cables are routed correctly and not pinched.
4.4. Saddle and Seat Post Installation
Insert the seat post into the frame's seat tube. Adjust the saddle height for comfortable riding and tighten the quick-release clamp or bolt.
4.5. Pedal Installation
Identify the left (L) and right (R) pedals. The left pedal has a reverse thread. Apply a small amount of grease to the threads and screw the pedals into the crank arms. Tighten firmly with a wrench.
4.6. Battery Charging
Before your first ride, fully charge the battery. Connect the charger to the charging port on the battery (or directly to the battery if removable) and then to a power outlet. The indicator light on the charger will change when fully charged (typically 5-6 hours).
4.7. Tire Pressure Check
Inflate the tires to the recommended pressure, usually indicated on the tire sidewall. Proper tire pressure ensures optimal performance and safety.
4.8. Pre-Ride Safety Check
Before your first ride and every subsequent ride, perform a quick safety check:
- Check brake levers for proper function and responsiveness.
- Ensure tires are inflated to the correct pressure.
- Verify all quick releases and bolts are tight.
- Test the headlight and taillight.
- Confirm the battery is securely in place.
5. Operating Instructions
5.1. Powering On/Off
To power on the e-bike, press and hold the power button on the LCD display for a few seconds. To power off, repeat the process.
5.2. Smart LCD Display Screen
The LCD display provides essential riding information:

Figure 5.1: Smart LCD Display Screen
- Power: Indicates motor power output.
- Battery Level: Shows remaining battery charge.
- Assist Level: Displays the current pedal assist mode (1-5).
- Real-time Speed: Current riding speed in MPH or Km/h.
- ODO: Total distance traveled.
- TRIP: Distance traveled for the current trip.
- VOL: Battery voltage.
- CUR: Controller current.
- RM: Remaining mileage (estimated).
- T1: Single run time.
- Cruise Control: Indicator for cruise control activation.
- Walk Assist Mode: Indicator for walk assist function.
- Braking Applied: Indicator when brakes are engaged.
- Controller Current Indicator Bar: Visual representation of current draw.
Use the '+' and '-' buttons to adjust assist levels and navigate display menus. The 'M' button typically cycles through display modes or confirms selections.
5.3. Riding Modes and Speed Settings
The EB3S offers 5 pedal assist modes, each with a different initial speed:

Figure 5.2: Driving Modes
- Mode 1: 6 km/h
- Mode 2: 10 km/h
- Mode 3: 15 km/h
- Mode 4: 20 km/h
- Mode 5: 25 km/h
These modes are designed to comply with EU road regulations. For use on private property, the speed limit can be adjusted to allow a maximum speed of 35 km/h. Refer to the detailed user manual PDF for instructions on adjusting speed settings.
5.4. Braking System
The EB3S is equipped with front and rear cable-operated disc brakes, featuring a power cut-off function for enhanced safety. When the brake levers are engaged, power to the motor is immediately cut off.

Figure 5.3: Disc Brakes with Power Cut-Off
5.5. Lights
The e-bike features bright LED front and rear lights for safe travel at night. Activate them using the controls on the handlebar or display.

Figure 5.4: LED Front and Rear Lights
5.6. App Connectivity
The iScooter EB3S is compatible with the Neutral App (VoltiX) for enhanced control and monitoring. Download the app on your smartphone and follow the in-app instructions to connect your e-bike via Bluetooth.

Figure 5.5: VoltiX App Connectivity
6. Care and Maintenance
6.1. Battery Care
The 36V 15AH lithium battery is a high-capacity unit, offering 60-80 km range and charging in 5-6 hours.

Figure 6.1: High Capacity Battery
- Charge the battery regularly, even if not in use, to maintain its health.
- Avoid completely draining the battery before recharging.
- Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
- Use only the original charger provided with the e-bike.
6.2. Tires
The EB3S features 26 x 1.95 inch wide all-terrain tires.

Figure 6.2: Wide All-Terrain Tires
- Regularly check tire pressure and inflate to the recommended PSI/Bar indicated on the tire sidewall.
- Inspect tires for wear, cuts, or punctures before each ride.
6.3. Brakes
- Periodically inspect brake pads for wear and replace them when necessary.
- Check brake cables for fraying or damage and ensure they are properly tensioned.
- If brakes feel spongy or unresponsive, have them inspected by a qualified technician.
6.4. Suspension Fork
The e-bike is equipped with a double suspension front fork for a comfortable ride.

Figure 6.3: Double Suspension Front Fork
- Keep the suspension stanchions clean.
- Check for any leaks or unusual noises from the suspension.
6.5. General Cleaning
- Wipe down the frame and components with a damp cloth.
- Avoid using high-pressure washers directly on electrical components or bearings.
- Lubricate the chain regularly to ensure smooth operation and prevent rust.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| E-bike does not power on | Battery not charged or not properly installed; loose connections. | Ensure battery is fully charged and securely seated. Check all cable connections. |
| Motor not assisting | Low battery; assist level set to 0; brake levers engaged; motor or controller issue. | Check battery level and charge if low. Increase assist level. Ensure brake levers are fully released. If problem persists, consult support. |
| Brakes squealing or ineffective | Worn brake pads; dirty rotors; misaligned calipers; loose cables. | Clean rotors. Inspect and replace worn brake pads. Adjust brake calipers or cable tension. |
| Lights not working | Loose connection; damaged wiring; switch off. | Check light switch. Inspect wiring for damage and ensure connections are secure. |
| Unusual noises during riding | Loose components; chain issues; bearing wear. | Inspect all bolts and fasteners. Lubricate chain. If noise persists, seek professional inspection. |
8. Specifications
The iScooter EB3S combines powerful performance with robust design.

Figure 8.1: Key Performance Specifications

Figure 8.2: Product Dimensions and Weight
| Feature | Specification |
|---|---|
| Brand Name | iScooter |
| Model | EB3S |
| Certification | CE, EN 15194 |
| Motor | 250W (Nominal), 350W (from image), 500W (Peak) Brushless Motor |
| Max Speed | 25 km/h (EU legal assisted), up to 35 km/h (private property) |
| Battery | 36V 15Ah Lithium battery (Removable) |
| Range per Charge | 60-80 km (depending on terrain and rider weight) |
| Charging Time | 5-6 Hours |
| Wheel Size | 26 inches (26 x 1.95" All-Terrain Tires) |
| Frame Material | Aluminum alloy |
| Brakes | Front and Rear Cable-Operated Disc Brakes with Power Cut-Off |
| Rated Passenger Capacity | One Seat |
| Max Climbing Angle | 25° |
| Water Resistance Rating | IPX4 |
| USB Output Port | Yes (for charging devices) |
| Folded | No |
| Product Weight | 24.6 KG |
| Maximum Load | 150 KG |
| Dimensions (L x H x W) | 172cm x 97cm x 68.5cm |
| Recommended Age | 18 and Above |
9. User Tips
- Always Wear a Helmet: Protect yourself by wearing a certified helmet on every ride.
- Know Your Local Laws: Familiarize yourself with the specific e-bike regulations in your area regarding speed limits, where you can ride, and licensing.
- Practice in a Safe Area: Before riding in traffic, practice starting, stopping, and turning in a safe, open space.
- Regular Checks: Make it a habit to check tire pressure, brake function, and battery level before each ride.
- Plan Your Route: Consider the battery range and terrain when planning longer rides to avoid running out of power.
- Utilize Pedal Assist: Experiment with different pedal assist levels to find the most comfortable and efficient setting for your ride.
- Secure Your Bike: Always use a reliable lock when leaving your e-bike unattended.
10. Warranty and Support
For detailed warranty information, specific troubleshooting guides, and comprehensive support, please refer to the official user manual provided in PDF format.
Official User Manual (PDF): Download User Manual PDF
This PDF contains in-depth instructions and diagrams that may not be fully covered in this summary. It is highly recommended to consult this document for any specific questions or issues.