HITBOX HIM200

Contents

HITBOX HIM200 4-in-1 Multi-process Welder

User Instruction Manual

1. Safety Information

Welding operations can be dangerous and may cause harm to the operator and others. Always adhere to safety guidelines to prevent accidents.

  • Professional Training: Operation of this machine requires professional training. Ensure you possess a valid 'Metal Welding (OFC) Operation' certificate.
  • Protective Gear: Always use labor protection welding supplies authorized by safety departments. Wear a comfortable welding mask, protective clothing, and gloves to protect your eyes and body.
  • Electrical Safety: Never touch charged areas with bare skin or wet gloves/clothing. Ensure you are insulated from the ground and workpiece. Always cut off power before performing maintenance or repairs.
  • Ventilation: Welding produces smoke and gases that can be harmful. Keep your head away from fumes and ensure adequate exhaust or ventilation to maintain a well-ventilated work environment.
  • Fire and Explosion Prevention: Welding sparks can ignite combustible materials. Ensure no flammable items are nearby. Have fire extinguishers readily available and know how to use them. Do not weld on sealed containers or use the machine for powder spray thawing.
  • Burn Hazard: Hot workpieces and the welding torch can cause severe burns. Avoid direct contact with hot parts. Allow the torch to cool during continuous use.
  • Magnetic Fields: Magnetic fields can affect pacemakers. Pacemaker users should maintain a safe distance from the welding area and consult medical advice.
  • Moving Parts: Keep hands, hair, and tools away from moving parts like fans. Ensure all doors, panels, and protective devices are closed during operation.
  • Machine Failure: If the machine malfunctions, seek professional help. Refer to this manual for troubleshooting or contact your supplier's service center.

2. Product Overview

The HITBOX HIM200 is a versatile 4-in-1 multi-process synergic welder designed for Flux MIG, Spool Gun (optional), Stick MMA, and Lift TIG welding. It is suitable for various metals including carbon steel and stainless steel, making it ideal for DIY projects and workshop repairs.

This machine features an IGBT power supply unit for enhanced reliability, a high duty cycle for extended welding times, and closed-loop feedback control for stable voltage output. The synergic MIG control automatically adjusts wire feed speed based on current, simplifying operation. Advanced MMA functions include Arc Force, Anti-Stick, Hot Start, VRD, and overcurrent protection for stable and safe welding.

3. Specifications

ParameterHIM200 (110/220V)HIM200 (220V)
Input Voltage (V)AC 110/220V ± 15%, 50/60HzAC 220V ± 15%, 50/60Hz
Rated Input Current (A)AC 110V 40A / AC 220V 20AAC 220V 20A
Rated Input Capacity (KVA)4.54.5
Recommended Fuse Capacity (A)3030
MMA Weld Current Range (A)10~12010~120
MIG Welding Current Range (A)20~12020~120
MIG Voltage Range (V)11~2011~20
No-load Voltage (V)5555
Wire Feeding Speed Range (m/min)1.5~161.5~16
Applicable Wire Diameter (mm)0.6/0.80.6/0.8
Rated Duty Cycle35% @ 40°C35% @ 40°C
Efficiency0.80.8
Power Factor0.750.75
Protection ClassIP21SIP21S
Insulation ClassFF
Product Weight9.92 lbs (4.5 kg)9.92 lbs (4.5 kg)
Dimensions (L x W x H)12.59" x 5.9" x 9.45"12.59" x 5.9" x 9.45"

Note: Specifications are subject to change without prior notice for product improvement.

4. Product Components and Panel Description

4.1 Front Panel

The front panel houses the main controls and connections for welding operations.

HITBOX HIM200 Front Panel Display in MMA Mode

Image: HITBOX HIM200 Front Panel Display in MMA Mode, showing digital readout and function indicators.

  1. MIG Torch Switch
  2. MIG Torch Slot
  3. Positive Output Terminal (+)
  4. TIG Indicator Light
  5. MMA Flag/Indicator
  6. Spool Gun Connector
  7. 0.8/1.0 Wire Diameter Indication
  8. Current Display (Digital LED)
  9. Abnormal Indication Light
  10. Function Switching Button
  11. Mode Switching Button
  12. Current/Wire Speed Adjustment Knob

4.2 Rear Panel

The rear panel contains the main power input and switch.

  1. Power Cord Input
  2. Power Switch (ON/OFF)

5. Setup and Installation

Before installation, ensure the power switch is OFF. The machine has an IP21S protection rating; avoid using it in rain or wet conditions.

5.1 Connection of Input Cables

  1. Connect the main power cable to a properly rated input power supply. Ensure all grounding connections are secure for safety.
  2. Ensure the primary cable is tightly connected to the correct socket to prevent oxidation.
  3. Verify the input voltage is within the acceptable range using a multimeter.

5.2 MMA (Stick) Welding Setup

  1. Insert the quick plug of the electrode holder cable into the appropriate quick plug socket on the front panel and tighten it clockwise to ensure good contact.
  2. Insert the quick plug of the work clamp cable into the other quick plug socket on the front panel and tighten it clockwise.
  3. Polarity:
    • DCEP (Direct Current Electrode Positive): Connect the electrode holder to the '+' output terminal and the work clamp to the '-' output terminal.
    • DCEN (Direct Current Electrode Negative): Connect the electrode holder to the '-' output terminal and the work clamp to the '+' output terminal.
    Choose the connection method based on the electrode type and workpiece requirements. Incorrect polarity can lead to an unstable arc and excessive spatter.
  4. If using long secondary cables, select a cable with a larger cross-section to minimize voltage drop.

5.3 MIG Welding Setup (Flux Core / Spool Gun)

  1. Connect the main power cable to a properly rated input power supply, ensuring grounding.
  2. Insert the quick plug of the MIG torch cable (or spool gun cable) into the '+' output socket on the front panel and tighten it clockwise.
  3. Insert the quick plug of the work clamp cable into the '-' output socket on the front panel and tighten it clockwise.
  4. Install the wire spool onto the rotating shaft inside the machine. Ensure the drive roller groove dimensions match the wire diameter and the contact tip size of the torch.
  5. Feed the welding wire through the wire feeder mechanism and into the torch liner. Press the wire snap button to feed the wire out of the torch head.
  6. If using shielding gas (for MIG/MAG with solid wire), connect the gas hose from the wire feeder to the flow regulator on the gas cylinder.

5.4 Installation Diagrams (Conceptual)

The HIM200 supports various configurations:

  • MIG + Flux Core: Welder connected to MIG torch, work clamp, and flux core wire.
  • ARC (MMA): Welder connected to electrode holder, work clamp, and welding electrode.
  • LIFT TIG: Welder connected to TIG torch, work clamp, gas cylinder (if applicable), and tungsten electrode.
  • MIG + Spool Gun: Welder connected to spool gun, work clamp, and wire spool within the spool gun.

6. Operating Instructions

6.1 General Operation Steps

  1. After completing the installation, turn on the power switch on the rear panel. The power LED should illuminate, and the cooling fan should start.
  2. Select the desired welding mode (MMA, MIG, TIG) using the mode switching button on the front panel.
  3. Adjust welding parameters (current, voltage, wire speed) using the control knob according to the workpiece material, thickness, and welding process.

6.2 MMA (Stick) Welding Operation

  1. Select MMA mode.
  2. Adjust the welding current based on the electrode diameter and workpiece thickness. General guidelines:
    • φ2.5mm electrode: 70-100A
    • φ3.2mm electrode: 110-160A
    • φ4.0mm electrode: 170-220A
    • φ5.0mm electrode: 230-280A
  3. Initiate the arc by striking the electrode against the workpiece. The built-in Hot Start and Arc Force features will assist in smooth arc ignition and stability.

6.3 MIG Welding Operation

HITBOX HIM200 Synergic MIG Control Display

Image: HITBOX HIM200 Synergic MIG Control Display, showing wire diameter and current/wire feed speed adjustment.

  1. Select MIG mode.
  2. If using shielding gas, open the cylinder valve and set the gas flow rate using the regulator.
  3. Adjust the inductance control knob: rotate counter-clockwise for lower inductance and a harder arc (suitable for lower currents); rotate clockwise for higher inductance and a softer arc (suitable for higher currents).
  4. Adjust the welding current and voltage using the control knob. The synergic control will automatically adjust the wire feed speed.
  5. Press the torch trigger to start welding. The gas supply will typically cut off a short time after the arc stops.

6.4 Welding Parameter Tables (Reference Only)

Optimal welding performance depends on correctly setting current, voltage, and wire speed based on electrode diameter, metal transfer method, and production requirements. Refer to the detailed tables in the full PDF manual for specific guidelines on butt welds, flat angle welds, fillet welds, and lap welds for various plate thicknesses and materials.

For comprehensive welding parameter charts, please consult the full user manual PDF.

7. Maintenance

Regular maintenance ensures the longevity and safe operation of your welding machine.

  • Internal Connections: Periodically check all internal circuit connections, especially plugs. Tighten any loose connections. If oxidation is present, clean with sandpaper and reconnect.
  • Moving Parts: Keep hands, hair, and tools clear of moving parts like cooling fans to prevent injury or damage.
  • Cleaning: Regularly clean dust from the machine using dry, clean compressed air. In smoky or polluted welding environments, clean the machine daily. Ensure compressed air is at an appropriate temperature to avoid damaging small components.
  • Environmental Protection: Protect the machine from rain, water, and excessive vapor. If exposed, dry it thoroughly and check the insulation of all components before reuse.
  • Cable Inspection: Periodically inspect the insulation cover of all cables. Replace or repair any worn or damaged insulation.
  • Gas Hoses: Regularly check gas hoses (trachea) for cracks or damage and replace if necessary.
  • Storage: If the machine will be unused for an extended period, store it in a dry place in its original packaging.

8. Troubleshooting

Before attempting any troubleshooting, ensure the machine's input power cable is disconnected from the utility. Troubleshooting requires electrical expertise and comprehensive safety knowledge.

SymptomPossible Cause / Check Steps
Overheating LED is on1. Check welding current and time; operate within duty cycle. 2. Check fan operation; ensure 230V supply to fan. 3. Thermal switch may be damaged; replace if necessary.
No response when pressing gun trigger, protection LED off1. Check if power LED and digital meter are lit. 2. Check torch trigger and connection. 3. Check wire feeder connection.
Wire feeder sends wire, but no output current, protection LED off1. Check work clamp connection to workpiece. 2. Check quick plug connections. 3. Check wire feeder connection. 4. Inspect welding torch for damage. 5. Internal control PCB failure.
Output current when trigger pressed, but wire feeder doesn't send wire1. Inspect wire feeder for blockage/damage. 2. Inspect welding torch contacts for blockage/damage. 3. Wire feed plate (PK-93) faulty.
Welding possible, but voltage cannot be adjusted (no-load voltage too high)1. Check control cable of wire feeder. 2. Control PCB inside machine has failed.
Welding current unstable1. Check pressure arm on wire feeder. 2. Check drive roller matches wire size. 3. Check contact tip of torch for wear. 4. Check welding wire quality. 5. Check if torch cable is twisted or quick plug is loose.
Weld not well protected1. Ensure protective gas shields beads after welding (don't remove torch immediately). 2. Extend protective gas afterflow time.
Large pit after welding1. Select 4T mode for crater welding at low currents. 2. Change operating mode.

9. User Tips

  • Always Wear PPE: Prioritize safety by always wearing appropriate Personal Protective Equipment (PPE), including a welding helmet with the correct shade, welding gloves, and flame-resistant clothing.
  • Ensure Ventilation: Always work in a well-ventilated area to disperse welding fumes and gases. If natural ventilation is insufficient, use exhaust fans.
  • Practice Makes Perfect: Before working on critical projects, practice on scrap metal to familiarize yourself with the machine's settings, arc characteristics, and different welding techniques.
  • Clean Work Area: Keep your welding area clean and free of any flammable materials to prevent fire hazards.
  • Wire Selection: Use the correct type and diameter of welding wire for your specific application and ensure it is free from rust or contaminants.

10. Warranty and Support

For professional assistance with installation, operation, troubleshooting, or in case of machine failure, please consult your supplier's service center or the authorized HITBOX dealer.

A comprehensive user manual in PDF format is available for download from the product page or the manufacturer's official website.

For further information, product updates, or support, please visit the official HITBOX website:

www.hitboxweld.com

© 2023 HITBOX. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.