Introduction
The SONICAKE QWS-20 is a professional 5.8GHz wireless audio transmission system designed for various audio equipment and musical instruments, including electric guitars, keyboards, and digital wind instruments. It provides stable, long-distance audio transmission with high-fidelity sound quality, minimizing signal stuttering and interference.
Operating in the 5.8GHz band, the QWS-20 effectively reduces interference from common 2.4GHz devices like Wi-Fi and Bluetooth. Its robust signal penetration and diffraction capabilities ensure a stable connection even in environments with obstacles. This compact, responsive, and user-friendly system offers dependable wireless freedom for stage performances, rehearsals, and studio sessions.
Safety Instructions
- Do not use or charge the device near water sources or in damp environments to prevent short circuits or battery malfunctions.
- Store the device in a cool and dry place to avoid moisture damage to internal components.
- Avoid direct sunlight or high-temperature environments to prevent battery overheating, expansion, shell deformation, or paint cracking.
- Use original or certified data cables for charging to avoid battery damage or fire risks due to unstable voltage.
- If the device is left unused for a long time, charge it to 50% every 3 months to prevent battery damage from over-discharge.
- Non-professionals are prohibited from disassembling the shell or replacing parts. Repairs should be handled by professional technicians.
- If the battery is swollen, emits an odor, or overheats abnormally, stop using it immediately and contact after-sales service. Do not continue charging or operating.
Product Overview
The SONICAKE QWS-20 system consists of a transmitter (TX) and a receiver (RX) unit, both featuring a 6.35mm TS plug and a Type-C charging port. The plug has a 210° rotatable design for secure fitting into various instruments and audio equipment.
Key Features:
- 5.8 GHz Wireless Transmission: Advanced technology reduces interference from 2.4 GHz devices for a cleaner, more stable connection.
- 6 Selectable Channels: Easily switch between 6 wireless channels for reliable performance in different environments and multi-device setups.
- Ultra-Low Latency: Less than 6 ms latency for fast, responsive performance.
- High-Resolution Audio: 24-bit / 48 kHz audio processing captures clarity, detail, and dynamic response.
- Long Wireless Range: Stable performance from 30m (100 ft) up to 50m (165 ft) line-of-sight.
- Wide Frequency Response: 20 Hz–22 kHz (±1 dB) preserves the full character of your sound.
- One-to-Many Capability: A single transmitter can connect to multiple receivers, allowing for expanded usage.
- Up to 8 Hours Battery Life: Play longer on a full charge with automatic signal-off for energy efficiency.
- Secure Rotating Plug Design: The 1/4" connector rotates 210° for a secure fit on most instruments.
Setup
Package Contents:
- 1 x SONICAKE QWS-20 Transmitter (TX)
- 1 x SONICAKE QWS-20 Receiver (RX)
- 1 x Dual Port Type-C Splitter Charging Cable
- 1 x User Manual
Connecting the System:
- Insert Transmitter (TX): Plug the transmitter unit into the output jack (e.g., 6.35mm TS jack) of your instrument (guitar, bass, keyboard, etc.). The 210° rotatable plug allows for flexible positioning.
- Insert Receiver (RX): Plug the receiver unit into the input jack of your amplifier, effects pedal, audio mixer, or DI box.
- Adapter Use: If your audio equipment has a 3.5mm interface, you will need a suitable adapter (not included) for conversion.
Operating Instructions
1. Power On/Off
- Power On: Press and hold Multi-function Button 1 on both the transmitter and receiver for 3 seconds until the indicator light stays steadily lit.
- Power Off: Press and hold Multi-function Button 1 on both the transmitter and receiver for 3 seconds until the indicator light turns off.
2. Battery Level Check
Short press Multi-function Button 1 on either the transmitter or receiver to check the battery level. The indicator light will display the current battery status:
- Green light flashes: 80%~100% battery.
- Yellow light flashes: 30%~79% battery.
- Red light flashes: 0%~29% battery (low battery).
3. Pairing and Channel Selection
- Initial Pairing: Press and hold Multi-function Button 2 on both the transmitter and receiver simultaneously for 3-4 seconds to enter pairing mode. The receiver's indicator will remain solid, while the transmitter's light flashes. Once the transmitter's light becomes steady (within approximately 20 seconds), pairing is successful, and the system will automatically exit pairing mode. You can also briefly press Multi-function Button 2 on the TX to speed up pairing.
- Automatic Pairing: After the initial setup, the system will automatically pair during future use when powered on.
- Switching Channels: Short press Multi-function Button 2 on the transmitter to cycle through the 6 available channels. This is useful for finding a clear frequency in crowded wireless environments.
4. Charging
Use the provided dual port Type-C splitter charging cable to charge both the transmitter and receiver simultaneously. The devices will automatically power off during charging and cannot be used while charging.
5. One-to-Many Connection
The QWS-20 system supports connecting a single transmitter to multiple receivers. This allows for distributing your instrument's signal to several amplifiers or mixing consoles simultaneously. Ensure all receivers are paired to the same channel as the transmitter.
Maintenance
- Keep the device clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Protect the device from extreme temperatures, humidity, and direct sunlight.
- Ensure the Type-C charging port is free from dust and debris to maintain proper charging connection.
- When not in use for extended periods, store the units in a protective case to prevent physical damage.
- Follow battery charging guidelines to prolong battery life and prevent damage.
Troubleshooting
- No Sound/Intermittent Signal:
- Ensure both transmitter and receiver are powered on and fully charged.
- Verify that both units are correctly paired and on the same channel.
- Try switching to a different channel to avoid interference from other wireless devices.
- Check the distance between the transmitter and receiver; ensure it's within the specified range (30-50 meters line-of-sight).
- Minimize physical obstructions between the units.
- Ensure the instrument and amplifier cables are securely connected.
- Poor Sound Quality/Noise:
- Check for strong sources of electromagnetic interference nearby (e.g., Wi-Fi routers, microwaves).
- Ensure the units are not too close to other electronic devices that might cause interference.
- Verify that the instrument's output and amplifier's input levels are set appropriately.
- Units Not Charging:
- Ensure the Type-C charging cable is securely connected to both the units and a power source.
- Try a different Type-C cable or power adapter.
- Check if the charging port is clean and free of debris.
Specifications
| Feature | Specification |
|---|---|
| Operating Frequency Band | 5.8GHz (6 channels) |
| System Frequency Response | 20Hz-20kHz (+/-1dB) |
| Sampling Rate / Precision | 48kHz/24Bit |
| Transmission Distance | Approx. 30~50 meters (depending on the environment) |
| Signal-to-Noise Ratio (SNR) | >95dB |
| Battery Life (Full Charge) | >8 hours |
| Latency | <4ms |
| Battery Capacity | 500mAh (Transmitter/Receiver) |
| Is Batteries Included | Yes |
| Hardware Interface | Bluetooth (for internal communication, not user-facing) |
| Audio Output Effects | Multi-effects (refers to the system's capability to transmit various instrument signals) |
| Control Type | Knob (refers to the multi-function buttons) |
| Weight | 200g (total package weight) |
| Type | Guitar Transmitter Receiver |
User Tips
- Pre-Gig Check: Always ensure both units are fully charged and paired before any performance or recording session.
- Optimal Placement: While the system has good range, maintaining a clear line-of-sight between the transmitter and receiver can further enhance signal stability, especially in complex environments.
- Channel Management: In crowded wireless environments, experiment with different channels to find the clearest one, minimizing potential interference.
- Power Saving: The system features automatic signal-off for energy efficiency. Remember to fully power off the units when not in use to conserve battery.
- Multi-Instrument Setup: If using multiple instruments with wireless systems, ensure each instrument's transmitter is paired to a unique receiver and channel to avoid cross-talk.
Regulatory Information
FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IC Caution (Radio Standards Specification RSS-Gen, issue 5):
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
French: Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes:
- Cet appareil ne doit pas causer d'interférences.
- Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil.
Déclaration d'exposition RF: L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. L'appareil peut être utilisé dans des conditions d'exposition portable sans restriction.
Model: QWS-20
IC: 30072-QWS20
FCC ID: 2A7J4-QW520
Made in China
FC CE ROHS
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official SONICAKE website or contact your local dealer. Keep your purchase receipt as proof of purchase.