1. Introduction
The TUOSEN Folding Digital Wire Stripper Pliers are a versatile multi-function tool designed for various electrical tasks. This tool combines wire stripping, wire cutting, wire crimping, and digital voltage testing capabilities into a compact, foldable design. Made from durable carbon steel, it is an essential tool for electrical DIY projects and professional use.
2. Safety Information
WARNING: This is a non-insulated tool. Do NOT work with live electricity using this tool for general tasks. The voltage test pen function is for emergency use only. Always ensure power is OFF before performing any electrical work.
- When using the voltage test function, hold the insulated handle and touch the sensor at the bottom of the handle with your index finger. The head of the pliers is NOT insulated. Be extremely careful to avoid electric shock.
- Always wear appropriate personal protective equipment (PPE), such as safety glasses and gloves, when working with tools and electricity.
- Keep the tool clean and dry to prevent electrical hazards and maintain functionality.
- Keep out of reach of children.

3. Setup
The TUOSEN Folding Digital Wire Stripper Pliers feature a foldable design for easy storage and portability. To prepare the tool for use:
- Grasp both handles firmly.
- Unfold the pliers until they are fully extended and locked into the open position.
- Ensure all moving parts operate smoothly before use.

4. Operating Instructions
4.1 Wire Stripping
The pliers are equipped with multi-specification wire stripping holes and a sharp stripping blade for quick and efficient removal of cable outer skin.
- Identify the correct stripping hole size for your wire (e.g., 0.5mm, 0.8mm, 1.0mm, 1.6mm, 2.0mm, 2.6mm, or 20-22 AWG).
- Insert the wire into the corresponding stripping hole.
- Gently squeeze the handles to cut through the insulation, then pull to strip the wire.

4.2 Wire Cutting
The pliers include a shear function for cutting wires. Position the wire within the cutting blades and squeeze the handles firmly to cut.
4.3 Digital Voltage Testing
The tool features a large screen digital voltage tester for live/neutral wire detection. This function should be used with extreme caution and only as an emergency test pen due to the tool's non-insulated nature.
- Ensure the pliers are in the open position.
- Hold the insulated handle.
- Touch the sensor at the bottom of the pliers handle with your index finger.
- Carefully touch the wire or terminal you wish to test with the pliers' head.
- Observe the digital display and light/sound prompts:
- Touching live wire: Green light on, red light flashing, alarm sounds, and voltage displayed on screen.
- Touching neutral wire: Green light on.
Refer to the safety information in Section 2 before using the voltage tester.

5. Maintenance
- Cleaning: After each use, wipe the pliers clean with a dry cloth to remove any dirt, dust, or debris.
- Lubrication: Periodically apply a small amount of light machine oil to the pivot points and moving parts to ensure smooth operation and prevent rust.
- Storage: Store the pliers in a dry place, away from moisture and corrosive materials. The foldable design allows for compact storage.
- Inspection: Regularly inspect the stripping blades for sharpness and damage. Replace the tool if significant wear or damage is observed, especially to the insulated handles.
6. Troubleshooting
- Pliers feel stiff: Apply lubricant to the pivot points and work the handles to distribute the oil.
- Ineffective stripping: Ensure you are using the correct stripping hole size for the wire gauge. If blades are dull, consider replacing the tool.
- Digital display not working: Check for any visible damage to the display or sensor. Ensure proper contact with the sensor on the handle when testing. If the issue persists, the internal battery may be depleted or the unit may be faulty.
- Voltage detection inconsistent: Ensure firm contact with the wire and the sensor on the handle. Verify the wire is indeed live if no reading is obtained.
7. Specifications
| Attribute | Value (Item No. 2512230 - Light Blue) | Value (Item No. 2512231 - Dark Blue) |
|---|---|---|
| Product Name | TUOSEN Foldable Digital Display Wire Stripper | |
| Material | Carbon Steel | |
| Handle Style | Straight | |
| Features | Multifunctional, Digital Voltage Detection, Foldable | |
| Application | Multi Functional, Electrical DIY Supplies | |
| Overall Length | 210 mm | 230 mm |
| Jaw Length | 110 mm | 125 mm |
| Handle Length | 115 mm | 115 mm |
| Weight | 0.25 kg | 0.26 kg |
| Package Dimensions (L x W x H) | 27 cm x 12 cm x 4 cm | |
| Package Weight | 0.268 kg | |
Note: All parameters are measured manually; slight variations may occur. Item No. 2512230 corresponds to the Light Blue variant, and 2512231 to the Dark Blue variant.

8. User Tips
- Clarify Product Variants: The product is available in two variants (Light Blue and Dark Blue), which have slightly different dimensions and weights. Ensure you have the correct item number (2512230 or 2512231) for your specific tool.
- Regular Cleaning: Keep the stripping blades and pivot points clean to maintain optimal performance and prevent corrosion.
- Voltage Tester Caution: Always double-check the safety warnings regarding the voltage tester. It is a non-insulated tool, so extreme care is necessary when testing for live wires.
9. Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the seller's specific policies or contact the point of purchase. Keep your purchase receipt as proof of purchase.