Teschev Portable EV Charger 3.5kW 16A (Type1/Type2)

Contents

Teschev Portable EV Charger Instruction Manual

Model: Portable EV Charger 3.5kW 16A (Type1/Type2)

Brand: Teschev

1. Introduction

Thank you for choosing the Teschev Portable EV Charger. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your EV charger. Please read this manual thoroughly before using the product and keep it for future reference.

Teschev Portable EV Charger with Type2 connector, EU plug, IP65 rating, and carry bag.
Figure 1: Teschev Portable EV Charger overview (Type2 shown)

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the product and your vehicle:

  • Do not use the charger if the cable or plug is damaged.
  • Do not operate the charger in extreme conditions beyond its specified operating temperature range.
  • Ensure the charging plug is fully inserted into the vehicle's charging port before initiating charging.
  • Keep the control box and connectors dry during use, especially in wet weather.
  • Do not attempt to open or repair the charger yourself. Contact qualified personnel for service.
  • Ensure the power outlet used is properly grounded and rated for the charger's input power.
Product Advantage icons: Overvoltage protection, Lightning protection, Overcurrent protection, Rain protection, Grounding free protection, Emergency stop protection.
Figure 2: Built-in safety protections

3. Product Overview

The Teschev Portable EV Charger is designed for convenient and flexible charging of electric vehicles. It features an adjustable current, a clear LCD screen, and robust safety protections.

3.1 Components

  • Charger Head: Available in Type1 (SAE J1772) or Type2 (IEC 62196-2) with a protective cover, special spring structure, and integrated design.
  • Control Box: Features an LED display, IP55 waterproof rating, and temperature monitoring.
  • Cable: Long service life, resistant to cold and high temperatures, flexible and foldable.
  • Power Plug: CEE7/7 (EU Schuko) plug.
Diagram showing charger head with protective cover, control box with LED display and temperature monitoring, and cable features.
Figure 3: Charger components and features

3.2 Control Box Functions

  • Leakage protection
  • Over-voltage or Low-voltage protection
  • Over-load protection
  • Lightning protection
  • Over-heat protection
  • Current adjustment (8A/10A/13A/16A)
  • Timer Function (0-12 Hours Delay Charging)

3.3 LED Display Information

The LED display provides real-time charging data:

  • Charging Temperature
  • Charging Status
  • Set Current
  • Energy Charged in KW/h
  • Charged time
  • Charging Voltage
  • Charging Current
  • Charging Power
LED Digital Display showing rated current, charging status, power consumption, charging time, real-time temperature, real-time power, real-time voltage, real-time current, and signal voltage.
Figure 4: LED Display details
Detailed breakdown of LED display values including real-time temperature, charging power, voltage, current, appointment charging, and charging speed.
Figure 5: Comprehensive LED Display information

4. Specifications

FeatureSpecification
Charger TypePortable EV Charger
Charging TypeType1 SAE J1772 / Type2 IEC62196
Network PlugCEE7/7 (EU Schuko Plug)
PhasesSingle Phase
Input Voltage110V~250V AC
Output Power3.5kW (Max. Loading Power: 3.6kW)
Current8A/10A/13A/16A adjustable
Power Pins3 pcs (L1, N, PE)
Signal Pins2 pcs (CP, PD)
Signal Current2A
Signal Voltage30V AC
IP Rating (Overall)IP65
IP Rating (Control Box)IP55
Operating Temperature-25℃ to +55℃
Mechanical LifePlug in/out > 10000 times
Cable Length3.5 meters
Weight1.9kg
TouchscreenYes
Wireless SupportNo
Parameter information for Type 2 charger, including CEE Plug, 3.6kW loading power, 16A current, 220V+15% voltage, single phase, 0-10 hour delayed charging, AC transmission, IP65 rating, and temperature resistance.
Figure 6: Detailed Parameter Information (Type 2 example)

5. Setup

Follow these steps to set up your Teschev Portable EV Charger:

  1. Unpack: Carefully remove the charger and all accessories from the packaging. The charger comes with a storage bag for convenience.
  2. Placement: Choose a suitable location for charging. Ensure the charger is placed on a stable surface and the cable can reach your vehicle's charging port without tension. The charger is designed to be water, heat, and cold resistant (IP65/IP55 rated), allowing for outdoor use within the specified temperature range.
  3. Power Connection: Plug the CEE7/7 (EU Schuko) power plug into a compatible and properly grounded wall outlet.
  4. Vehicle Connection: Open your vehicle's charging port cover. Insert the appropriate charging gun (Type1 or Type2) firmly into the vehicle's charging port.
Video 1: Demonstration of connecting the portable EV charger to a vehicle.
Image showing two different styles of charging guns, Type 1 and Type 2, with the control box and cable for each.
Figure 7: Type 1 and Type 2 charging gun styles
Image showing the portable EV charger and its storage bag, emphasizing its foldable and easy-to-carry design.
Figure 8: Foldable design and included storage bag

6. Operating Instructions

Once the charger is connected to both the power outlet and your vehicle, the LCD screen on the control box will activate.

6.1 Adjusting Charging Current

The charger allows you to adjust the charging current to suit your needs or the capacity of your electrical circuit. The available settings are 8A, 10A, 13A, and 16A.

  1. Press the 'Set up' or 'Booking/Switch' button on the control box to cycle through the available current options.
  2. Select your desired current (e.g., 16A for faster charging, or a lower amperage if your circuit cannot handle 16A).
  3. The selected current will be displayed on the LCD screen.
Control box display showing current settings (8A, 10A, 13A, 16A) and delay options (0-12 hours).
Figure 9: Current and Delay settings on the control box
Image illustrating current switching with a quick button function to adjust between 8A, 10A, 13A, and 16A. Note: grounding is not required during charging.
Figure 10: Current adjustment via control box button

6.2 Using the Timer Function (Delayed Charging)

The charger includes a timer function for delayed charging, allowing you to schedule charging up to 12 hours in advance.

  1. With the charger connected, press the 'Set up' or 'Booking/Switch' button repeatedly until the timer setting appears on the LCD screen.
  2. Adjust the delay time (e.g., 1-12 hours) as desired.
  3. The charger will begin charging automatically after the set delay period has elapsed.
Smart charging station features showing adjustable reserved charging time from 1 to 10 hours and adjustable current from 8A to 16A, with an example of scheduled charging for electricity savings.
Figure 11: Smart charging station with timer and current adjustment

6.3 Starting and Stopping Charging

  • To Start: After connecting the charger and setting the desired current/delay, the charger will automatically begin charging or start after the delay. The charging status will be displayed on the LCD.
  • To Stop: Disconnect the charging gun from your vehicle first, then unplug the power plug from the wall outlet.

7. Maintenance

Proper maintenance ensures the longevity and safe operation of your EV charger.

  • Cleaning: Wipe the charger and cables with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure all connections are free from dust and debris.
  • Storage: When not in use, store the charger in its provided storage bag in a dry, cool place, away from direct sunlight and extreme temperatures.
  • Inspection: Regularly inspect the charging cable, plugs, and control box for any signs of damage, wear, or corrosion. If any damage is found, discontinue use immediately and contact support.
Image highlighting water, heat, and cold resistance features, showing the charger being used in rain, its heat-resistant design up to +55°C, and extreme cold resistance down to -25°C.
Figure 12: Environmental resistance features

8. Troubleshooting

If you encounter issues with your charger, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Charger not turning onNo power from outlet; damaged cable/plugCheck power outlet; inspect cable/plug for damage.
Charging not startingCharging gun not fully inserted; vehicle not ready to charge; delayed charging activeEnsure secure connection; check vehicle status; verify timer settings.
Over-heat protection activatedHigh ambient temperature; poor ventilation; internal faultMove to a cooler area; ensure adequate airflow around the control box; if persistent, contact support.
Error message on LCDInternal fault; voltage/current anomalyUnplug and re-plug the charger. If the error persists, note the error code and contact support.

9. User Tips

  • Optimize Charging Speed: If your vehicle and electrical circuit can handle it, select the 16A current setting for the fastest charging experience.
  • Schedule Charging: Utilize the timer function to charge during off-peak hours to potentially save on electricity costs.
  • Portability: The charger is designed to be foldable and comes with a storage bag, making it easy to transport and store in your vehicle's trunk.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.

11. Additional Resources

A detailed user manual in PDF format is available for download. You can access it here: Teschev Portable EV Charger User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.