1. Product Overview
The Pinmany RZ-DF67 CAN Bus Decoder is specifically designed to facilitate the installation of aftermarket Android head units in compatible vehicles. Its primary function is to read and interpret vehicle CAN bus data, providing essential data support for the proper installation, debugging, and functional adaptation of Android head units.
2. Specifications
| Feature | Detail |
|---|---|
| Model Name | RZ-DF67 |
| Product Type | CAN Bus Data Converter / Cables, Adapters & Sockets |
| Brand Name | pinmany |
| Manufacturer | Raise |
| Operating Voltage | 9V-16V DC |
| Operating Temperature | -30 °C to +70 °C |
| Connector Type | 20-pin and 16-pin PH2.0 |
| Dimensions (L×W×H) | 73.5mm × 46.5mm × 18.5mm (manual measurement, error ±1mm) |
| Item Weight | 45g |
| Material | Black plastic shell |
| PCB Included | Yes |
| High-concerned chemical | None |
| Suitable Head Unit | Android 7"/9"/10"/etc. (with UART interface) |
3. Compatible Car Models
This CAN Bus Decoder is compatible with the following Nissan models:
- Nissan Teana (Russia): 2008-2012
- Nissan Quest: 2008-2012
- Nissan Patrol: 2008-2012
- Nissan Elgrand: 2008-2012
- Nissan Murano: 2008-2014
Compatibility Notice:
- The product's functions are dependent on the vehicle's multimedia CAN node data. Without the corresponding data, certain functions may not be realized.
- Due to variations across vehicle brands, models, and years, there may be differences in compatibility and adaptability. If you are unsure about compatibility, please contact customer service for confirmation before purchase.
4. Installation and Wiring
4.1 Pre-Installation Considerations
- This product does not include wiring harnesses. Users must prepare the appropriate adapter harnesses.
- The CAN Bus decoder is compatible only with Android head units featuring an 8-pin connector and serial communication.
- Wiring requires professional knowledge. If you are unsure, please consult a professional or contact support.
- Auto charts can be complex. If you are unsure about fitting, please contact support before purchase.
4.2 Connecting the CAN Bus Decoder
- Locate the 20-pin CAN plug of your vehicle's wiring harness.
- Connect the 20-pin CAN plug to the 20-pin socket of the CAN Bus Decoder.
- The 16-pin PH2.0 connector on the decoder typically requires no wiring.
4.3 20-pin PH2.0 Connector Pin Definition and Wiring Instructions
WARNING: When wiring, strictly follow the pin definition. Never reverse or misplug to avoid device damage. The 16-pin connector does not require connection.
| Pin No. | Pin Definition | Wiring Instructions |
|---|---|---|
| 1 | GND | Connect to the vehicle's power negative or body ground |
| 2 | BATT | Connect to the vehicle's 12V power positive |
| 3 | CAN1_H | Connect to the vehicle's multimedia CAN bus high line |
| 4 | CAN1_L | Connect to the vehicle's multimedia CAN bus low line |
| 5 | SWC1 | Connect to the vehicle's Steering wheel button signal |
| 6 | NC | No wiring required, leave idle |
| 7 | NC | No wiring required, leave idle |
| 8 | REV_OUT | Connect to the Android head unit's reverse signal |
| 9 | CAN2_H | Connect to the vehicle's multimedia CAN bus high line |
| 10 | CAN2_L | Connect to the vehicle's multimedia CAN bus low line |
| 11 | EJECT | No wiring required, leave idle |
| 12 | SWC2 | Connect to the vehicle's Steering wheel button signal |
| 13 | UART_RX | Connect to the Android head unit's UART_TX interface |
| 14 | NC | No wiring required, leave idle |
| 15 | NC | No wiring required, leave idle |
| 16 | UART_TX | Connect to the Android head unit's UART_RX interface |
| 17 | NC | No wiring required, leave idle |
| 18 | NC | No wiring required, leave idle |
| 19 | NC | No wiring required, leave idle |
| 20 | ACC IN | Connect to the vehicle's ACC signal line |
5. Operating Instructions: Android Head Unit Setup
After completing the physical wiring, you must configure the CANBUS function on your Android head unit. Failure to do so will prevent proper data recognition and function adaptation.
- Enter Settings: Navigate to the settings menu on your Android head unit.
- Access Factory Settings: Look for a 'Factory' or 'Car Settings' option. You may need to enter a factory password. Common passwords include: 3368, 1617, 8317, 8888. If these do not work, consult your Android head unit vendor.
- Enter CAN Bus Settings: Within the factory settings, find the 'CAN Bus Settings' or similar option.
- Select Manufacturer and Model: Choose the correct CAN Bus Box manufacturer (e.g., 'Raise' or 'Pinmany') and then select your specific car model and year from the list. If your exact model is not listed, try selecting a similar model or contact the Android head unit seller for an APP update.
- Save and Reboot: Save your settings and reboot the Android head unit for changes to take effect.
6. Maintenance
The Pinmany RZ-DF67 CAN Bus Decoder is a low-maintenance electronic device. To ensure its longevity and proper function:
- Keep the device dry and away from extreme temperatures.
- Avoid physical impact or dropping the device.
- Ensure all connections are secure and free from corrosion.
- Do not attempt to open the device casing, as this may void any potential support.
7. Troubleshooting
7.1 Common Issues and Solutions
- No data recognition / Functions not working:
- Verify all wiring connections are correct according to the pin definition (refer to Section 4.3).
- Ensure the Android head unit has a UART interface and that the CANBUS function is enabled in its settings.
- Confirm that the correct CAN Bus Box manufacturer and car model are selected in the Android head unit settings (refer to Section 5).
- Check if your vehicle's multimedia CAN node provides the necessary data for the desired functions. Some functions may not be supported if the vehicle lacks the data.
- If the car model is not found in the head unit settings, try selecting a similar model or contact the Android head unit seller for an APP update.
- Device not powering on:
- Check the vehicle's 12V power positive (BATT) and ground (GND) connections.
- Ensure the operating voltage of the vehicle is within 9V-16V DC.
- Device damage after installation:
- Damage due to reverse connection, incorrect insertion, or wiring not in accordance with the pin definition is not covered by support. Always follow wiring instructions carefully.
7.2 General Advice
If you encounter compatibility or adaptability issues during use, or if troubleshooting steps do not resolve your issue, please contact our customer support for assistance.
8. User Tips
No specific user tips were available from reviews or Q&A for this product at this time. Always ensure professional installation for complex wiring tasks.
9. Support and Disclaimer
9.1 Customer Support
We are a reliable seller with professional after-sale service. If you have any questions or require assistance with your order or product, please contact us directly. We are committed to providing a satisfactory resolution.
9.2 Disclaimer
This manual will be updated periodically with product upgrades. If the actual operation of the product differs from the instructions in this manual, the actual functionality of the product shall take precedence. Our company reserves the right of final interpretation regarding product features and specifications.