1. Safety Information & Warnings
Warning:
- Ensure proper power supply (DC 12-42V/5A) to avoid damage.
- Do not expose the device to moisture or extreme temperatures.
- Handle with care to prevent damage to electronic components.
- For modifications or technical support regarding preamp gain adjustment, consult technical support.
2. Product Overview
The XinYi Sini Audio TWS Bluetooth Digital Amplifier Board XY-T4001P is a high-efficiency audio amplifier module featuring the TPA3223 chip. It supports both mono and TWS stereo configurations, offering versatile audio input options and independent bass and treble adjustments.
Key Features:
- TPA3223 Chip: Ensures efficient operation, low heat generation, high power output, and pure sound quality.
- TWS True Wireless: Supports dual amplifier board interconnection for a stereo system.
- Independent Tone Control: Multi-function knob allows free control of bass and treble.
- Multi-Decoding Support: Compatible with BT AAC/SBC and USB lossless formats (WAV, FLAC, APE, MP3).
- Wide Application: Ideal for home theaters, party speakers, DIY projects, and various audio scenarios.
Component Identification:

Image: Detailed view of the amplifier board highlighting key components such as the larger heat sink, capacitor array, audio special inductors, low-loss coupling audio, solid capacitance, NE5532 chips, and the TWS Bluetooth chip (AAC SBC).

Image: Close-up of the TPA3223 Amplifier IC (High-Efficiency & Low-Thermal, Pure Audio Quality, High-Power Output), TWS Bluetooth Chip (Stable Transmission, Lossless Audio, Ultra-Low Power Consumption), unique dual-side antenna design for enhanced signal strength, and preamp gain adjustment (Gain = R/10K, factory default R: 15K).
3. Specifications
| Parameter | Value |
|---|---|
| Product Name | TWS Bluetooth Digital Audio Amplifier Board |
| Product Model | XY-T4001P |
| Power Supply | DC 12-42V/5A |
| Audio Inputs | Bluetooth / AUX / USB |
| Bluetooth Audio Codecs | SBC, AAC |
| USB Lossless Decoding | WAV, FLAC, APE, MP3 |
| Dissipation Power | 0.01-0.05W |
| Supply Voltage | Standard |
| Operating Temperature | -20℃ - +70℃ |
Power Supply and Output:
| Voltage | Output Power (8Ω) | Output Power (4Ω) | Output Power (2Ω) |
|---|---|---|---|
| 12V | 10W | 20W | 30W |
| 24V | 30W | 70W | 150W |
| 36V | 80W | 160W | 350W |
| 42V | 100W | 200W | 400W |

Image: A table summarizing the product specifications including product name, model, power supply, audio inputs, Bluetooth audio codecs, USB lossless decoding, and power output at various voltages and impedances.
Dimensions:

Image: Technical drawing showing the dimensions of the integrated potentiometer version of the amplifier board, including overall length, width, and height, as well as knob spacing.

Image: Technical drawing showing the dimensions of the shell version of the amplifier board, including overall length, width, and height, and knob size.
4. Setup
Connecting the Amplifier Board:

Image: Diagram illustrating the various interfaces and functions of the amplifier board, including DC power input (5.5-2.5mm, 12-42V), SPK+ and SPK- terminals for speakers, power on/off switch, power LED, TWS LED, Bass knob, Treble knob, Multifunction knob, USB port, AUX input, and an optional external 2.4GHz antenna connection (First-generation IPEX interface).
- Power Supply: Connect a DC 12-42V/5A power supply to the DC input (5.5-2.5mm).
- Speakers: Connect your speakers to the SPK+ and SPK- terminals.
- Power On: Insert the DC plug and switch the power on.
Unassembled Versions:
Note: Products are shipped unassembled, and accessories are shipped separately for self-assembly.

Image: Illustrates the different versions of the product (Integrated Potentiometer, Wired Potentiometer, Shell Version) and their respective dimensions and packaging. A screwdriver is included with each version.
5. Operating Instructions
Audio Input Modes:

Image: Shows a smartphone connected via Bluetooth, and the amplifier board with 3.5mm AUX and USB Audio/USB Flash Drive inputs.
- Bluetooth (BT): Connect wirelessly from your smartphone or other Bluetooth-enabled devices.
- AUX: Use a 3.5mm audio cable to connect external audio sources.
- USB Audio/USB Flash Drive: Insert a USB drive with WAV, FLAC, APE, or MP3 files for direct playback.
Multifunction Knob:
The multifunction knob provides several controls:
- Click: Pause/Play
- Double-click: Next track
- Triple-click: Mode switch
- Quadruple-click: Pair/Unpair TWS
- Quintuple-click: Factory Reset
- Long-press: Power on/off
TWS Stereo Pairing Procedure:
This product supports pairing two amplifier boards to form a stereo system.

Image: Two amplifier boards connected to speakers, demonstrating the TWS stereo pairing capability. The product can mix dual-channel audio into mono, and supports TWS pairing between two amplifiers for stereo sound.
- Power On Both Boards: Ensure both amplifier boards are powered on. The blue indicator lights will flash rapidly. Do not pair with phone Bluetooth, connect AUX, or plug in a USB flash drive at this stage.
- Initiate Pairing: On one amplifier board, quickly press the volume knob four times. The TWS red indicator light on this board will begin flashing rapidly. The blue indicator light on the other board will continue flashing rapidly.
- Confirm Pairing: Wait for the TWS red indicator light on the initiating board to change from fast flashing to solid ON (this board becomes the Master, Left channel). The other board's blue indicator light will turn off, and its red indicator light will start flashing slowly (this board becomes the Slave, Right channel). This indicates a successful TWS connection. If the red indicator light goes out, the connection has failed; repeat step 2.
- Connect Audio Source: After successful TWS connection, open your phone's Bluetooth settings, search for "XinYi", and connect. Your phone will then play music through the stereo system. Alternatively, insert an AUX cable or USB drive into the Master unit to play music.
Canceling TWS Stereo Function:
During TWS stereo connection, quickly press the volume knob of any amplifier board four times in a row to exit the TWS stereo mode.
Important Notes for TWS:
- When using TWS function, always establish the TWS connection between the two boards first, and then pair your phone's Bluetooth to the Master unit.
- The TWS stereo function has a memory mode and will automatically reconnect to the paired boards at next power-on.
Bluetooth Connection Tips:

Image: Shows a smartphone's Bluetooth settings, demonstrating how to turn on Bluetooth, search for and pair with the "XinYi" device to play music. It also shows how to search for and pair with the Sinilink-APP to control the amplifier board.
- Turn on Bluetooth on your mobile phone.
- Search for and pair with the device named "XinYi" to play music.
Sinilink APP:

Image: Screenshot of the Sinilink APP interface, showing options to change the Bluetooth name and set a pairing password. Users should click "Set" to complete changes.
The Sinilink APP allows you to change the Bluetooth name and set a pairing password for your amplifier board. After making changes, click the "Set" button to apply them.
Video: A demonstration of the Bluetooth Amplifier XY-T4001P in action, showcasing mono mode operation, music playback via Bluetooth, and the TWS stereo pairing process with two amplifier boards.
6. Maintenance
- Keep the amplifier board clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to direct sunlight or high humidity.
- Ensure adequate ventilation, especially around the heat sink, to prevent overheating.
7. Troubleshooting
- No Power: Check the DC power supply connection and ensure the power switch is ON. Verify the power supply voltage is within the 12-42V range.
- No Sound: Ensure speakers are correctly connected. Check the audio input source (Bluetooth, AUX, USB) and volume levels. For Bluetooth, ensure successful pairing.
- Bluetooth Pairing Issues: Make sure no other devices are connected to the amplifier via Bluetooth. If using TWS, ensure TWS pairing is completed first before connecting your phone. Try a factory reset (quintuple-click the multifunction knob).
- TWS Pairing Failure: If the red indicator light goes out during TWS pairing, the connection failed. Repeat the four-press operation on the volume knob to retry. Ensure no other audio sources (AUX, USB) are connected during TWS pairing.
- Distorted Sound: Check speaker impedance compatibility with the amplifier's output. Reduce volume if distortion occurs at high levels. Ensure the power supply can provide sufficient current (5A).
8. User Tips
- Optimal Sound: Experiment with the independent bass and treble adjustment knobs to fine-tune the sound to your preference and speaker characteristics.
- Power Supply: For maximum output power, use a higher voltage power supply (e.g., 42V) within the specified range.
- TWS Setup: When setting up TWS stereo, ensure both boards are powered on and follow the pairing steps carefully before connecting your phone.
- App Control: Utilize the Sinilink APP to customize Bluetooth name and password for a personalized experience.
9. Support
For further detailed information, technical support, or specific modifications, please refer to the official user manual PDF available at: User Manual (PDF).