MICMOL FELIX G2

Contents

MICMOL FELIX G2 Marine LED Light User Manual

Model: FELIX G2 Series

Important Safety Information

Please read this entire manual carefully before installation or operation. Failure to follow these instructions and warnings can result in serious injury or product damage.

DANGER: Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE: Used to address practices not related to physical injury.

Electrical Safety

  • Always turn off all power to the light fixture before installation, cleaning, or any maintenance.
  • Ensure the power supply and wiring are properly installed and grounded to prevent electrical shock hazards.
  • Do not operate the light if the power cord or plug is damaged.
  • Keep electrical connections dry and away from water to prevent short circuits.

Product Overview

The MICMOL FELIX G2 series offers a powerful yet thin LED aquarium lighting solution. Designed with the latest MicMol blue spectrum and 90-degree depth secondary lenses, it provides enthusiastic color and energy for your aquatic environment.

This series is available in four sizes, suitable for tanks ranging from 60cm to 170cm (24" to 67"). Key features include an extremely thin profile (13mm), a slim design, adjustable brackets for easy installation, and a Bluetooth app controller for comprehensive lighting management.

The FELIX G2 is ideal for supplemental lighting in reef tanks. Its multiple blue wavelengths are crucial for coral growth and development, powering photosynthesis in zooxanthellae and regulating coral circadian rhythms.

Thin profile of the FELIX LED light with 'Impressively power & thin' text.
Figure 1: MICMOL FELIX G2 LED Light - Impressively thin design.
FELIX LED light with power ratings (24-30W, 36-45W, 48-60W, 60-75W) and 'Immerse yourself in a blue corals world.' text.
Figure 2: FELIX G2 series showing various sizes and power ratings.

Specifications

The FELIX G2 series is available in several models, each tailored for different tank sizes and lighting requirements. Below are the detailed technical specifications:

Technical Specifications table for FELIX 600, 900, 1200, 1500 models.
Figure 3: Detailed Technical Specifications for FELIX G2 models.

Detailed Specifications by Model:

Feature FELIX 600 FELIX 900 FELIX 1200 FELIX 1500
Item No. F-600 F-900 F-1200 F-1500
LEDs 24pcs 36pcs 48pcs 60pcs
Actual Power 30W 45W 60W 75W
Waterproof IP62 IP62 IP62 IP62
Installation Standard: Adjustable Bracket, Optional: Rotate Bracket
Size 58*6.8*1.3cm (22.8"*2.7"*0.51") 88*6.8*1.3cm (34.7"*2.7"*0.51") 118*6.8*1.3cm (46.5"*2.7"*0.51") 148*6.8*1.3cm (58.3"*2.7"*0.51")
Light Weight 1.0Kg 1.5Kg 2.0Kg 2.5Kg
Packing 75*7*5cm 105*7*5cm 135*7*5cm 165*7*5cm
Marine LED Composition 6pcs Royal Blue, 6pcs Deep Blue, 6pcs Deep Blue, 6pcs UV 9pcs Royal Blue, 9pcs Deep Blue, 9pcs Deep Blue, 9pcs UV 12pcs Royal Blue, 12pcs Deep Blue, 12pcs Deep Blue, 12pcs UV 15pcs Royal Blue, 15pcs Deep Blue, 15pcs Deep Blue, 15pcs UV
Planted LED Composition 24pcs WRGB 4 in 1 LEDs (White, Blue, Green, Red) 36pcs WRGB 4 in 1 LEDs (White, Blue, Green, Red) 48pcs WRGB 4 in 1 LEDs (White, Blue, Green, Red) 60pcs WRGB 4 in 1 LEDs (White, Blue, Green, Red)
Coverages (Length Min) 60cm (24") 90cm (36") 120cm (48") 150cm (60")
Coverages (Length Max) 80cm (31.5") 100cm (40") 140cm (55") 170cm (67")
Coverages (Width Max) 45cm (18") 45cm (18") 45cm (18") 45cm (18")

General Product Properties:

  • Width: 8 CM
  • Fixture Type: Clip-On
  • Origin: Mainland China
  • Type: Fish (Aquarium Lighting)
  • Battery Included: No
  • High-concerned chemical: None

Setup Instructions

1. Unpacking and Inspection

  • Carefully remove all components from the packaging.
  • Inspect the light fixture, power adapter, and adjustable brackets for any signs of damage. Do not proceed with installation if any part is damaged.
  • Ensure all listed components are present.

2. Installing the Adjustable Bracket

The FELIX G2 light comes with adjustable brackets for easy mounting on your aquarium. The brackets allow for rotation to optimize light direction.

  1. Attach the adjustable brackets to both ends of the light fixture.
  2. Place the light fixture with attached brackets onto the edges of your aquarium.
  3. Adjust the length of the brackets to fit your tank securely.
  4. Rotate the light fixture as needed to achieve the desired lighting angle over your aquarium.
FELIX LED light with adjustable bracket, showing it mounted on an aquarium.
Figure 4: FELIX G2 light installed on an aquarium using the adjustable bracket.
Video 1: Product demonstration showing light installation and color changes.

3. Power Connection

  • Connect the power adapter to the light fixture.
  • Plug the power adapter into a suitable electrical outlet. Ensure the outlet matches the voltage requirements (100V-240V, depending on your plug type: US, EU, UK, AU).
  • Verify the light turns on.

Operating Instructions

1. iMicMol APP Controller

The FELIX G2 light is controlled via a Bluetooth-enabled smartphone application, the iMicMol APP. This app allows for easy connection and comprehensive control over your light settings.

  1. Download the App: Search for "iMicMol" on the Apple App Store (for iOS devices) or Google Play Store (for Android devices) and install it.
  2. Connect via Bluetooth: Open the iMicMol app and follow the on-screen instructions to connect to your FELIX G2 light via Bluetooth.
  3. Control Modes: The app offers two primary control modes: Auto and Manual.
    • Manual Mode: Allows direct adjustment of the 4 individual LED channels to customize light intensity and color.
    • Auto Mode: Provides pre-set or programmable lighting schedules, including effects like Lunar, lightning, and cloudy, to simulate natural conditions.
  4. Settings: Utilize the app's rich settings to fine-tune your lighting environment for optimal coral and plant health.
Screenshot of the iMicMol APP Controller interface on a smartphone, showing power, auto, manual, lunar, and LED settings.
Figure 5: iMicMol APP Controller interface.

For more information on specific app features and advanced settings, please refer to the official user manual PDF: User Manual (PDF).

Maintenance

Regular maintenance ensures the longevity and optimal performance of your MICMOL FELIX G2 LED Light.

1. Cleaning the Light Fixture

  • WARNING: Always disconnect power to the light fixture before cleaning.
  • Use a soft, damp cloth to wipe down the exterior of the light fixture.
  • Avoid using abrasive cleaners or solvents, as these can damage the finish or LED lenses.
  • Gently clean the LED lenses to ensure maximum light output and prevent algae or salt creep buildup.
  • Ensure the light is completely dry before reconnecting power.

2. Power Cord and Adapter Inspection

  • Periodically inspect the power cord and adapter for any signs of wear, cuts, or damage.
  • If any damage is found, discontinue use immediately and contact customer support for replacement.
  • Ensure the power cord is not kinked or pinched, which can lead to internal damage.

Troubleshooting

This section provides solutions to common issues you might encounter with your FELIX G2 LED Light.

  • Light does not turn on:
    • Check if the power adapter is securely plugged into both the light fixture and the electrical outlet.
    • Verify the electrical outlet is functioning by plugging in another device.
    • Ensure there are no visible damages to the power cord or adapter.
  • App cannot connect to the light:
    • Ensure Bluetooth is enabled on your smartphone.
    • Make sure the light fixture is powered on and within Bluetooth range.
    • Try restarting the iMicMol app and your smartphone.
    • If issues persist, try resetting the light fixture (refer to the full PDF manual for specific reset procedures if available).
  • Inconsistent light output or flickering:
    • Check all power connections for looseness.
    • Ensure the light fixture is not exposed to excessive moisture or humidity beyond its IP62 rating.
    • If the problem continues, contact customer support.

User Tips

Based on general user feedback for similar aquarium lighting products, here are some tips to enhance your experience:

  • Gradual Acclimation: When introducing new lighting, especially powerful LEDs, to your aquarium, start with lower intensity and gradually increase it over several days or weeks. This helps corals and plants acclimate and prevents shocking them.
  • Optimal Placement: Experiment with the height and angle of your light fixture using the adjustable brackets to achieve the best light spread and intensity for your specific tank inhabitants.
  • Regular Cleaning: Dust and salt creep can accumulate on the light fixture and lenses, reducing light output. Clean the fixture regularly as per the maintenance instructions.
  • App Customization: Take advantage of the iMicMol app's advanced settings to create custom lighting schedules that mimic natural day-night cycles and seasonal changes, which can benefit the health and coloration of your aquatic life.

Warranty and Support

For warranty information, technical support, or to inquire about replacement parts, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

You may also refer to the comprehensive user manual PDF for additional details: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.