AVATTO GW90-POE-Ti

Contents

AVATTO ZigBee 3.0 PoE Dongle User Manual

Model: GW90-POE-Ti

Brand: AVATTO

1. Product Introduction

The AVATTO Zigbee 3.0 PoE Dongle (Model: GW90-POE-Ti) is a high-performance Zigbee gateway designed for smart home systems. Powered by an ESP32+CC2652P chipset, it facilitates the connection of Zigbee sub-devices to open-source platforms such as Home Assistant and Zigbee2MQTT. This dongle supports Power over Ethernet (PoE) and offers versatile connectivity options including Ethernet, Wi-Fi, and USB, making it adaptable to various application scenarios. It features a web-based management interface accessible via mDNS for firmware updates, mode switching, and other advanced configurations like Webhook, MQTT, VPN, and a one-click Turbo mode.

AVATTO Zigbee 3.0 PoE Dongle with Home Assistant and Zigbee2MQTT logos
Figure 1: AVATTO Zigbee 3.0 PoE Dongle, compatible with Home Assistant and Zigbee2MQTT.
Diagram illustrating key features: high-performance chips (ESP32, CC2652P), 5dBi antenna gain, adjustable antennas, PoE/Type-C power, web-based firmware updates, and VPN support.
Figure 2: Overview of the dongle's high-performance chips, 5dBi antenna gain, adjustable antennas, power options, and web-based management capabilities.

2. Package Contents

Please check the box for the following items:

  • AVATTO Zigbee 3.0 PoE Dongle (GW90-POE-Ti)
  • Two (2) 5dBi Antennas
  • USB Type-C Cable
  • Mounting Bracket
  • Screws for mounting
  • Double-sided tape
  • User Manual (Printed)
Image displaying the product packaging and included accessories: the dongle, two antennas, a USB Type-C cable, a mounting bracket, screws, and double-sided tape.
Figure 3: Contents included in the AVATTO Zigbee 3.0 PoE Dongle package.

3. Specifications

Feature Description
Model Number GW90-POE-Ti
Chipset ESP32 + CC2652P
Antenna 5dBi Dual antennas with 360° rotation capability
Communication Method Zigbee 3.0, Ethernet, Wi-Fi, USB
Network Interface Type RJ45 (Gigabit Ethernet)
Input Power 5V-1A (Type-C) or 48V-0.25A (PoE port)
Working Temperature -10°C ~ 60°C
Dimensions (L×W×H) 157mm × 45mm × 31mm
Package Dimensions (L×W×H) 17cm × 9cm × 3cm
Package Weight 0.202 kg
Certification CE
Supported Platforms Home Assistant, Zigbee2MQTT
Diagram showing product dimensions and a table summarizing key specifications: model number, supported platform, chip, antenna, input power, working temperature, and physical dimensions.
Figure 4: Product dimensions and key technical parameters.
Comparison table of different Zigbee gateways, highlighting features like supported platforms, protocol, chip, antenna, connection type, number of devices, burning program, and app name.
Figure 5: Comparison of Zigbee Gateway features, showing the GW90-POE-Ti's capabilities.

4. Setup & Installation

4.1 Antenna Installation

  1. Carefully screw the two 5dBi antennas into the designated ports on the dongle.
  2. Adjust the antennas to your desired angle (they can rotate 360 degrees or 90 degrees) to ensure optimal signal coverage.
Detailed view of the dongle's ports (Type-C, RJ45 PoE, Network mode selection) and adjustable antennas, along with a screenshot of the web interface for computer/mobile control.
Figure 6: Antenna installation and port overview.

4.2 Device Placement

  • For desktop placement, you can use the provided double-sided tape to secure the device to a flat surface.
  • Alternatively, use the included mounting bracket and screws to fix the device to a wall or other suitable surface.

4.3 Power Supply Options

The GW90-POE-Ti dongle can be powered via two methods:

  • Power over Ethernet (PoE): Connect an Ethernet cable from a PoE-enabled router or switch to the dongle's RJ45 port. Ensure your network equipment supports PoE power supply. If not, a separate PoE power supply module will be required.
  • Type-C Power Supply: If PoE is not available or preferred, use the provided Type-C USB cable to connect the dongle to a 5V-1A power adapter (not included) or a computer's USB port.

4.4 Network Connection Methods

The dongle supports multiple ways to connect to your network:

  • Ethernet Connection (PoE powered): Connect an Ethernet cable to the RJ45 port for a stable and reliable wired network signal. This method can also provide power if your network supports PoE.
  • Wi-Fi Connection: The device can connect wirelessly to your home Wi-Fi network, offering flexibility in placement anywhere within your home.
  • USB Connection: Use the included Type-C USB cable to connect the device directly to a computer's USB port, allowing it to function as a USB Dongle. This is particularly useful for direct integration with Home Assistant Box devices.
Illustrations of multiple network connection methods: Ethernet (PoE powered), Wi-Fi, and USB connection.
Figure 7: Ethernet, Wi-Fi, and USB connection options.

5. Operation

5.1 Accessing the Web Console

To configure and manage your dongle:

  1. Ensure the device is connected to your network (Ethernet or Wi-Fi).
  2. Open a web browser on a computer or mobile phone connected to the same local area network (LAN).
  3. In the browser's address bar, enter avatto-gw90-ti.local.
  4. The first time you access the console, you will be prompted to set a password. Follow the on-screen instructions.
  5. Once logged in, you can configure the dongle for integration with ZHA (Zigbee Home Automation) or Z2M (Zigbee2MQTT).

5.2 Firmware Updates

Firmware updates for the GW90-POE-Ti are performed directly through its web interface. Regularly check for updates to ensure optimal performance and access to new features.

5.3 Compatibility with Smart Home Platforms

The AVATTO Zigbee 3.0 PoE Dongle is designed for broad compatibility within the smart home ecosystem:

  • Supported Open-Source Platforms: Home Assistant, Zigbee2MQTT.
  • Zigbee Device Compatibility: It is compatible with all Zigbee devices, allowing you to integrate a wide range of smart sensors, switches, and other devices into your smart home setup.
  • Integration with Home Assistant Boxes: The dongle can be seamlessly integrated with various Home Assistant Box devices, including Home Assistant Green, Home Assistant Yellow, Rasp Pi, AVATTO HA80, and AVATTO HA70.
Diagram showing compatibility with various smart home platforms like Home Assistant Green/Yellow, Rasp Pi, AVATTO HA80, and AVATTO HA70.
Figure 8: Application scenarios and compatible smart home platforms.
Image of the Zigbee 3.0 PoE Dongle emphasizing its compatibility with all Zigbee devices.
Figure 9: The Zigbee 3.0 PoE Dongle is compatible with all Zigbee devices.

6. Troubleshooting

  • Cannot access Web Console (avatto-gw90-ti.local): Ensure your device (computer/phone) is on the same local area network as the dongle. Check network cables for Ethernet connection or Wi-Fi signal strength for wireless. Restarting the dongle and your router may also help.
  • No power to the device: Verify that the Type-C cable is securely connected to a 5V-1A power source, or that your Ethernet switch/router provides PoE power. If using PoE, confirm your equipment is PoE-compatible.
  • Zigbee devices not connecting: Ensure the dongle's firmware is up to date. Check the dongle's web console for any error messages or status indicators. Make sure Zigbee devices are within range and in pairing mode.
  • Slow or unstable connection: Adjust antenna positions for better signal coverage. Consider using an Ethernet connection for maximum stability, especially if Wi-Fi interference is present.

7. User Tips

  • Optimal Placement: For best Zigbee signal range, place the dongle in a central location within your smart home network, away from large metal objects or other wireless interference sources.
  • Network Stability: Whenever possible, use the Ethernet connection for the dongle to ensure the most stable and reliable communication with your smart home platform.
  • Regular Updates: Periodically check the AVATTO website or the dongle's web console for firmware updates to benefit from performance improvements and new features.
  • Backup Configuration: Before making significant changes to your Zigbee network or dongle configuration, consider backing up your settings through the web interface.

8. Safety Information

  • This product is not a toy and is intended for adult use only. Keep out of reach of children.
  • The appliance is suitable for moderate climates only.
  • Ensure proper ventilation. Do not cover the appliance with items such as newspapers, tablecloths, curtains, etc., as this may impair ventilation and lead to overheating.
  • Do not place naked flame sources, such as candles, on or near the appliance.
  • Do not expose the device to water or excessive humidity.
  • Use only the specified power input (5V-1A for Type-C or 48V-0.25A for PoE).

9. Support & Resources

For further assistance and detailed documentation, please refer to the following resources:

  • Online User Manual & Firmware: To access the most up-to-date product manual and firmware files for the GW90-POE-Ti, please follow these steps:
    1. Visit the official AVATTO website: https://www.avattosmart.com
    2. Navigate to the "Home Assistant" section, then select "Dongle" and locate the GW90-POE-Ti model.
    3. Click "Learn More" and scroll to the bottom of the page.
    4. Select "Enter" under Technical Support to view setup instructions and download firmware/updates.
  • PDF User Manual: A downloadable PDF version of the user manual is available here.
  • Customer Support: If you encounter any issues or require further assistance, please contact AVATTO customer service. Our professional support team is ready to help you resolve any problems.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.