Introduction
The GOOLOO A7 is a versatile and powerful portable device designed to provide emergency jump-starting for vehicles and inflation for tires and other inflatables. It also functions as a power bank for charging electronic devices and includes multiple LED light modes for various situations. This manual provides essential instructions for safe and effective use, maintenance, and troubleshooting.
Safety Precautions
Please read and understand all safety information before using this product. Failure to follow these instructions may result in electric shock, explosion, fire, which may result in property damage, personal injury, or death.
- Do Not Submerge In Water.
- Do Not Disassemble or modify the unit.
- Do Not Drop.
- Avoid Extreme Temperatures. Do not use or store the unit near fire or in environments with excessive temperature.
- Do Not Place Near or Into Fire.
- Keep the unit away from water, pets, and children.
- The device includes Overcharge/Discharge Protection, Fuse Protection, and Against-reverse Plug for safety.
Package Contents
The GOOLOO A7 package typically includes the following items:
- 1x GOOLOO A7 Host (Jump Starter with Air Pump)
- 1x Air Hose
- 1x Nozzle Kits (various adapters for inflation)
- 1x USB-A to USB-C Cable
- 1x Blower Compression Tube
- 6x Blower Nozzles
- 1x User Manual (Quick Reference Guide)
- 1x Smart Jumper Cable with Clamps
Product Parts and Functions
Familiarize yourself with the different parts and functions of your GOOLOO A7 device:
- Light Switch: Activates the LED light modes.
- LED Display: Shows battery level, pressure readings, and other status indicators.
- Pressure Increase/Decrease: Adjusts target pressure for inflation.
- Power Switch: Turns the device on/off.
- Blower Function: Activates inflation/deflation for large volume items.
- Setting Button: Used to cycle through pressure units (PSI, BAR, KPA) or inflation modes.
- Output Port: USB-A output for charging devices.
- USB-C Input/Output Port: For charging the A7 unit and for PD30W output.
- Aerated Port: Connection point for the air hose for tire inflation.
- LED Flash Light: Provides illumination.
- 12V Jump Start Port: Connects to the smart jumper cable for vehicle jump-starting.
- Inflate/Deflate Ports: For connecting the blower compression tube for high-volume inflation/deflation.
Charging the GOOLOO A7
Before first use, fully charge your GOOLOO A7. It takes approximately 3.5 hours for a full charge.
- Connect the provided USB-A to USB-C cable to the USB-C Input/Output Port on the GOOLOO A7.
- Connect the other end of the cable to a compatible USB wall adapter (not included) with PD30W output (5V/3A; 9V/3A; 12V/2.5A; 15V/2A; 20V/1.5A).
- The LED display will indicate the charging status.
Note: While charging, ensure adequate ventilation. If your charger feels excessively hot, discontinue use and try a different compatible charger.
Operating Instructions
1. How to Jump Start a 12V Vehicle
Note: Please ensure the correct connection of the vehicle battery before pressing the "BOOST" button on the jumper cable.
- Connect the Jumper Cable: Plug the smart jumper cable into the 12V Jump Start port on the GOOLOO A7. Then, connect the red clamp to the positive (+) terminal of the vehicle battery and the black clamp to the negative (-) terminal.
- Wait for Green LED: Once connected correctly, the green LED on the smart jumper cable will illuminate solid. If it's flashing or red, refer to the Troubleshooting section.
- Start Vehicle Engine: Start your vehicle's engine. If it doesn't start immediately, wait a few seconds and try again. Do not crank for more than 3 seconds per attempt.
- Disconnect: Once the engine starts, disconnect the jumper cable from the GOOLOO A7 and then from the vehicle battery.
2. How to Use the Tire Inflator Function
- Attach Air Hose: Screw the air hose onto the Aerated port of the GOOLOO A7 and then attach the other end securely to the tire valve.
- Turn On and Set Pressure: Press and hold the Power Switch for 2 seconds to turn on the device. The LED display will show the current tire pressure. Use the Pressure Increase (+) and Pressure Decrease (-) buttons to set your desired target pressure.
- Start Inflation: Press the Power Switch again to start inflation. The device will automatically stop when the target pressure is reached.
- Disconnect: Once inflation is complete, disconnect the air hose from the tire valve and the GOOLOO A7.
3. How to Use the Blower (Inflate/Deflate) Function
This function is ideal for quickly inflating or deflating large volume items like air mattresses, inflatable boats, or vacuum storage bags.
- Attach Blower Tube: Attach the blower compression tube to either the Inflate or Deflate port on the GOOLOO A7, depending on your need. Securely connect the appropriate blower nozzle to the other end of the tube and insert it into the item.
- Turn On and Activate Blower: Press and hold the Power Switch for 2 seconds to turn on the device. Then, tap the Blower Function button to start inflation or deflation.
- Stop and Disconnect: Once the item is inflated or deflated to your satisfaction, tap the Blower Function button again to stop. Disconnect the tube and nozzles.
4. LED Light Modes
The GOOLOO A7 features multiple LED light modes for various emergency and utility purposes.
- Flashlight: Press the Light Switch once to turn on the flashlight.
- SOS Mode: Press the Light Switch a second time to activate the SOS signal.
- Strobe Mode: Press the Light Switch a third time for strobe lighting.
- Turn Off: Press the Light Switch a fourth time to turn off the LED light.
5. Power Bank Function
The GOOLOO A7 can charge your electronic devices via its USB-A and USB-C output ports.
- Connect your device's charging cable to either the USB-A Output port (Quick Charge 18W) or the USB-C Input/Output port (PD30W) on the GOOLOO A7.
- The GOOLOO A7 will automatically begin charging your device.
Maintenance
- Storage: Store the GOOLOO A7 in a cool, dry place away from direct sunlight and extreme temperatures.
- Charging: For optimal battery life, recharge the unit every 3-6 months, even if not in use. The battery standby time is approximately 18 months.
- Cleaning: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive materials.
- Battery Care: Avoid fully discharging the battery frequently to prolong its lifespan.
Troubleshooting
The smart jumper cable provides visual indicators to help diagnose common issues during jump-starting:
- Solid Green Light: Clamps are connected properly, and the device is ready. Proceed with the jump-start.
- Solid Red Light: Clamps are reversed. Reconnect the positive and negative terminals correctly. Once the green light turns solid, proceed with the jump-start.
- Flashing Green Light: Battery voltage is low. Press the BOOST button. Once the green light is solid, start the vehicle within 30 seconds.
- No Green or Red Light: The vehicle battery may be severely damaged or unresponsive. Check the clamp connections and press the BOOST button. Once the green light is solid, start the vehicle within 30 seconds.
If the device is not functioning as expected, please refer to the contact information in the Warranty/Support section for assistance.
Built-in Safety Protections
The GOOLOO A7 is equipped with 10 types of built-in safety protections to ensure safe operation:
- Over-Charge Protection
- Over-Current Protection
- Short-Circuit Protection
- Reverse-Polarity Protection
- Low-Temperature Protection
- High-Temperature Protection
- Spark-Proof Protection
- Over-Voltage Protection
- Over-Load Protection
- Reverse-Charge Protection
Specifications
| Feature | Detail |
|---|---|
| Product Name | A7 Jump Starter with Air Pump |
| Model No. | JS-558 |
| Battery Type | Lithium (Li-ion Battery) |
| Battery Capacity | 24000mAh / 88.8Wh / 3.7V |
| Number of Built-in Batteries | 4 |
| Starting Current | 800A |
| Peak Current | 6000A |
| Car Jump Start Output | 12V |
| Gas Engine Rating | 12V All (Up to 10L) |
| Diesel Engine Rating | Up to 10L |
| USB-C Input/Output | PD30W (5V/3A; 9V/3A; 12V/2.5A; 15V/2A; 20V/1.5A) |
| USB-A Output | Quick Charge 18W (5V/3A; 9V/2A; 12V/1.5A) |
| Max Inflation Pressure | 160PSI |
| Pressure Range | 4-160PSI |
| Air Flow Speed | Inflate 150L/min, Deflate 150L/min |
| Full Charging Time | About 3.5 hours |
| Operating Temperature | -20°C~60°C (-4°F~140°F) |
| Battery Standby Time | 18 months |
| 3 LED Light Modes | SOS/Lighting/Strobe |
| Dimension | 9.1 x 4.4 x 4.9 inches |
| Conversion Rate | >90% |
| External Testing Certification | MSDS, ROHS, FCC, CE |
| Origin | Mainland China |
User Tips
- The 6000A rating refers to the peak current, while the actual starting current is 800A. Both are powerful enough for a wide range of vehicles.
- Consider the length of the jumper cables and air hose for convenience, especially for larger vehicles or when the battery/tire valve is in an awkward position.
- When charging the GOOLOO A7, use a high-quality, compatible USB-C PD30W charger. Monitor the charger for excessive heat during the charging process.
- The smart jumper cables are specifically designed for the A7 model due to unique spacing. Ensure you use the correct cables for your device.
Frequently Asked Questions (FAQ)
- Q: Does the GOOLOO A7 come with a charger for recharging?
- A: The product includes a USB-A to USB-C cable for charging. A wall adapter is typically not included, but any compatible USB-C PD30W charger can be used to recharge the unit.
Warranty and Support
The GOOLOO A7 comes with an 18-month warranty.
For detailed guides and multilingual manuals, please scan the QR code provided in the Quick Reference Guide or visit the official website.
Contact Information:
- For US customers: fiona@gooloo.com
- For EU customers: support.eu@gooloo.com
- Website: www.gooloo.com
- Phone Support: 1-888-886-1805 (Mon.-Fri. PST 9:00a.m.-5:00p.m.)
Manufacturer: Shenzhen Carku Technology Co.,Ltd
Address: No.103, block A, Qixing Creative Factory, GaoFeng Community, Dalang Street, Longhua, Shenzhen, Guangdong, China.
UK Representative: EVATOST CONSULTING LTD
Address: Office 101 32 Threadneedle Street, London, United Kingdom, EC2R 8AY
Email: contact@evatost.com
EU Representative: eVatmaster Consulting GmbH
Address: Raiffeisen Street 2B11, 63110 Rodgau, Hessen, Germany
Email: contact@evatmaster.com
Video Demonstration
Watch this official video for a visual guide on how to use the GOOLOO A7 for jump-starting a vehicle and inflating tires.