1. Introduction
The Laservii L1 Pro is a versatile laser engraving machine designed for both hobbyists and professionals. It offers high-speed engraving and precise cutting capabilities on a variety of materials. This manual provides essential information for safe and effective operation, setup, maintenance, and troubleshooting of your device.
2. Safety Information
▲ Warning: Laser Radiation Hazard
This device contains a high-power laser module. Direct or indirect exposure to the laser beam can cause severe eye damage or skin burns. Always wear laser safety goggles matched to the 445 ± 5 nm wavelength during operation. Never look directly into the laser beam or at its reflection.
▲ Warning: Fire and Smoke Hazard
The laser processing process generates high temperatures, posing a high risk of igniting materials. Ensure proper ventilation and supervision during operation. Processing certain materials may produce toxic fumes; always operate in a well-ventilated area or with an exhaust system.
Prohibited Actions
- Unauthorized disassembly of the laser module.
- Electrical circuit modification.
- Removal of safety interlocks.
- Operation and maintenance of this device are strictly prohibited for unauthorized personnel.
Material Restrictions
Engraving/cutting of the following materials is strictly prohibited due to the risk of fire, toxic fumes, or damage to the machine:
- PVC (polyvinyl chloride)
- Fluorinated plastics (e.g., PTFE)
- Any other materials that may produce toxic fumes or ignite easily.
3. Product Features
- Laser Power Options: Available in 7W and 12W laser heads for diverse engraving and cutting needs.
- Ultra-High-Speed Engraving: Achieves speeds up to 12000mm/min, significantly increasing efficiency.
- Large Engraving Area: A generous 300x300mm (11.81 x 11.81 inch) working area for creative projects.
- High Precision: Ultra-fine laser spot with X ≤ 0.1mm, Y ≤ 0.16mm, and 0.01mm precision for detailed work.
- Broad Software Compatibility: Supports professional laser engraving software such as LightBurn and LaserGRBL.
- Multi-OS Support: Compatible with Windows and macOS systems.
- Mobile App Control: Equipped with Bluetooth for wireless operation via a mobile application (iOS and Android).
- Easy Modular Installation: Snap-on design for quick and straightforward assembly.
- Breathing Light Design: Provides visual indication of the machine's status.
- Core Technology: Equipped with a high-performance 445 nm blue laser module.
- Core Functions: Enables permanent engraving of graphics, text, and precise cutting of thin non-metallic materials.
- Device Characteristics: Compact design suitable for desktop use.
4. Specifications
| Attribute | Detail |
|---|---|
| Model | L1 Pro (7W / 12W options) |
| Engraving Area | 300x300mm (11.81 x 11.81 inch) |
| Maximum Engraving Speed | 12000mm/min |
| Engraving Precision | 0.05*0.05mm (Ultra-small laser spot: X ≤ 0.1, Y ≤ 0.16 mm) |
| Frame Composition | Plastic + Aluminium Alloy |
| Colour Combination | Blue + Black |
| Motor | NEMA 17 Stepper Motor |
| Input Voltage | 12V |
| Engraving Software | LightBurn, LaserGRBL, etc. |
| Wavelength | 445 ± 5 nm |
| Drive Method | Synchronous belt + synchronous pulley drive |
| Mobile App Control | Supported (Bluetooth) |
| Engraving Materials | Wood panels, plastic, paper, leather, bamboo, foam board, lacquered metal, acrylic |
| Controller | CNC USB |
| Is Smart Device | No |
| CNC or Not | Normal |
5. Setup Instructions
5.1 Environmental Preparation
- Place the device on a stable, well-ventilated surface.
- Ensure the working environment is clean and free from flammable materials.
- Always use the device in an area with adequate ventilation or an exhaust system to manage smoke and fumes.
5.2 Assembly (Four-step Simple Installation)
- Step 1: Assemble Framework
Connect the main frame components as shown in the diagram. - Step 2: Attach X-axis to Y-axis
After assembling the main frame, securely attach the X-axis component onto the Y-axis. - Step 3: Install Optical Shaft
Carefully install the optical shaft into its designated position. - Step 4: Install Laser Module
Finally, install the laser module to complete the installation procedure.
5.3 Software Connection
- Connect the device to a computer via a USB cable.
- Ensure the device's USB driver is correctly installed.
- The machine supports professional laser engraving software like LightBurn and LaserGRBL. It is compatible with Windows and macOS.
- For wireless control, connect via Bluetooth using the dedicated mobile app (iOS/Android).
6. Operating Instructions
6.1 Material Fixturing and Focusing
- Securely and evenly fix the workpiece onto the worktable to prevent movement during engraving/cutting.
- Adjust the laser focus precisely to the material surface. Incorrect focus can lead to poor results or damage.
6.2 Parameter Setup and Test Run
- In your chosen software (LightBurn, LaserGRBL, etc.), set appropriate power, speed, and pass count according to the material type and thickness.
- It is recommended to perform a small test run on a scrap piece of the same material to fine-tune settings before starting the main project.
6.3 Starting Processing
- Close the protective cover.
- Activate the exhaust system (if applicable).
- Send the processing command from the software.
6.4 Ending Operation
- After processing completes, wait until the device has fully stopped.
- Ensure the laser head has completely cooled before handling the device or removing the workpiece.
7. Maintenance
- Cleaning: Regularly clean the laser lens and the work area to ensure optimal performance and prevent debris buildup. Use a soft, lint-free cloth and appropriate cleaning solutions for optical components.
- Lubrication: Periodically check and lubricate the moving parts, such as the guide rails and lead screws, to ensure smooth operation.
- Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure your machine has the latest features and bug fixes.
- Device Protection: Do not operate at full power continuously beyond the maximum continuous duty time specified in the product manual to prevent overheating and prolong the lifespan of the laser module.
8. Troubleshooting (FAQ)
- Q1: What should I do if engraving/cutting depth is insufficient?
- A: Please check the following sequentially:
- Whether the laser focus is precisely aligned to the material surface.
- Whether the power, speed, and pass count settings in the software are appropriate for the material.
- Q2: Why are engraving edges unclear or charred?
- A: This is typically caused by excessive power or insufficient speed. Reduce the power percentage or increase the travel speed in the software settings.
- Q3: Why is the device not recognized after connecting to the computer?
- A: Please verify:
- Whether the USB cable is undamaged and securely connected.
- Whether the device's USB driver is correctly installed.
- Q4: Why does the laser head emit no light?
- A: Please check:
- Whether all power connections are secure and functional.
- Whether the "Laser Enable" option is activated in the software.
- Q5: How thick a material can be cut?
- A: Cutting capability depends on laser power, material properties, and focal length. For common 3 mm basswood or acrylic sheets, the L1 Pro 12W model offers good cutting performance.
9. User Tips
- Start with Low Power: When working with new materials, always start with lower power settings and gradually increase them to find the optimal balance between speed and quality.
- Test Engravings: Before committing to a large project, perform small test engravings on scrap material to verify settings and focus.
- Keep it Clean: A clean lens and work area are crucial for consistent and high-quality results. Dust and debris can scatter the laser beam.
- Ventilation is Key: Always ensure proper ventilation to dissipate smoke and fumes, protecting both your health and the machine.
- Secure Materials: Ensure your material is perfectly flat and securely fastened to prevent shifting during operation, which can ruin your project.
10. Warranty & Support
Warranty Policy
This product is covered by a limited warranty valid for 12 months from the date of receipt. The warranty covers failures arising from material or manufacturing defects.
Disclaimer
By using this product, the user acknowledges and agrees to the following:
- The manufacturer and seller shall not be liable for any direct or indirect damages.
- Failure to operate, maintain, or store the device in accordance with this manual may void the warranty and absolve the manufacturer/seller of liability.
- Unauthorized modification of the device, or use of non-OEM parts, will void the warranty.
- Use of the device outside its intended purpose, or processing of prohibited materials, is at the user's own risk.
- Installation, commissioning, or repair performed by personnel not authorized by the manufacturer will void the warranty.
- Damage caused by force majeure or unforeseen events is not covered.
- Normal wear and tear (e.g., natural power decay of the laser module over time) is not covered.
Technical Support
For assistance or technical inquiries, please contact us via:
- After-sales email: service@twotrees3d.com
- WhatsApp: +86 198 7919 9817
11. Compliance Marks
- CE Certificate No.: HTT202112264L
- Test Standard: EN 60825-1:2014/A11:2021
- Test Report No.: KTi250729S1799A2