PowMr FU07-248PC

Contents

PowMr 12KW Single-phase/Split-phase Hybrid Solar Inverter User Manual

Model: FU07-248PC

1. Introduction

This manual provides essential information for the safe and efficient operation of your PowMr 12KW Single-phase/Split-phase Hybrid Solar Inverter, Model FU07-248PC. This advanced inverter is designed to integrate solar power, battery storage, and utility grid power to provide a reliable and efficient energy solution for your home or business. It features a high-power pure sine wave output, efficient MPPT solar charging, multi-mode operation, and comprehensive protection mechanisms.

Front view of the MPPT Solar Inverter with key specifications
Figure 1: Front view of the MPPT Solar Inverter, highlighting key specifications: 7000W Rated Power, 120A Max Charge Current, 48VDC Battery Voltage, 425VDC Max DC PV Input. Also notes compatibility with Lead-acid/lithium batteries, max 6 units parallel, and RS485/CAN/USB communication.

2. Safety Information

Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electrical shock, fire, serious injury, or death.

  • All electrical installations must be performed by qualified personnel in accordance with local electrical codes.
  • Do not attempt to disassemble or repair the inverter. There are no user-serviceable parts inside.
  • Ensure proper grounding of the inverter.
  • Keep the inverter away from flammable materials, moisture, and direct sunlight.
  • Ensure adequate ventilation around the inverter to prevent overheating.
  • Always disconnect all power sources (PV, battery, utility) before performing any maintenance or wiring.
Diagram of Smart Protection System
Figure 2: Diagram of the inverter's "Smart Protection System" illustrating various protection mechanisms: Charge low/high temperature, Discharge low/high temperature, Discharge overcurrent, Charging overcurrent, Charging undervoltage, Short-circuit, Solar panel reverse connection, Battery overvoltage, and Over temperature protection.
Multi-Protection functions icons
Figure 3: Graphic highlighting the inverter's "Multi-Protection functions" with icons for Short-circuit, Surge, Overload, Over-Temp, Low Voltage, and High Voltage Protection.

3. Setup and Installation

3.1 Package Contents

Verify that all components are present:

  • PowMr Hybrid Solar Inverter Unit
  • User Manual (this document)
  • Communication Cables (RS485/CAN/USB, if included)
  • Mounting Hardware (if included)

3.2 Physical Installation

The inverter is IP20 rated for indoor use. Choose a mounting location that is:

  • Well-ventilated to allow for proper heat dissipation.
  • Protected from direct sunlight, rain, and moisture.
  • Accessible for wiring and maintenance.
  • Capable of supporting the inverter's weight (approximately 19KG).

Mount the inverter vertically on a sturdy wall using appropriate mounting hardware. Ensure sufficient clearance around the unit for airflow.

Multiple views of the inverter showing physical layout and ports
Figure 4: Multiple views of the inverter, showing its front, side, and bottom panels, including the display, ventilation, and port layout.

3.3 Wiring Connections

Refer to the diagram below for proper wiring connections. All wiring must comply with local electrical codes and standards.

Comprehensive system wiring diagram
Figure 5: A comprehensive system diagram illustrating the connection of solar panels, the inverter, battery bank, utility grid, and various household appliances (refrigerator, vacuum cleaner, washing machine, laptop, phone, light bulb).
Detailed diagram of inverter ports and labels
Figure 6: Labeled diagram of the inverter's front panel and bottom connections, with a table detailing each component.
Inverter Port Descriptions
No. Component Description
1Capacitive touch screenUser interface for settings and monitoring.
2LED indicatorStatus indicator lights.
3Terminal protection coverProtects wiring terminals.
4ON/OFF rocker switchMain power switch for the inverter.
5Parallel communication portFor connecting multiple inverters in parallel.
6RS485-1 portCommunication interface for external devices.
7CAN/RS485-2 portCommunication interface, including for Battery Management Systems (BMS).
8Dry contactProgrammable relay for external control.
9Battery port (positive)Positive terminal for battery connection.
10Battery port (negative)Negative terminal for battery connection.
11Photovoltaic portInput for solar panel array.
12AC output (L+N)Output for connecting to household loads.
13AC input (L+N+E)Input for utility grid connection.

3.4 Battery Connection

The inverter is compatible with 48V battery systems, including lead-acid, lithium iron phosphate (LFP), and ternary lithium batteries. Ensure correct polarity when connecting the battery bank to the inverter's positive and negative battery ports (9 and 10).

Inverter compatible with multiple battery types
Figure 7: Diagram showing the inverter's compatibility with multiple battery types (AGM, GEL, FLD, LI, SLD, USER) and max charging current of 120A.

3.5 Parallel Expansion

Up to 6 units of this inverter can be connected in parallel to increase total power output. This supports split-phase or three-phase networking with master-slave synchronized operation. Use the parallel communication ports (5) for this setup.

4. Operating Instructions

4.1 Powering On/Off

  • To Power On: Ensure all connections are secure. Flip the ON/OFF rocker switch (4) to the 'ON' position. The inverter will perform a self-test, and the LED indicator (2) will show its status.
  • To Power Off: Disconnect all loads from the AC output. Flip the ON/OFF rocker switch (4) to the 'OFF' position.

4.2 Display and Interface

The inverter features a capacitive touchscreen (1) for monitoring system status, configuring settings, and viewing historical data. It supports multilingual menus and stores 256 event logs and 1,024 days of historical data.

4.3 Charging Modes

The inverter offers four smart multi-mode charging options, configurable via the touchscreen or monitoring app:

  • PV Only: Charges batteries exclusively from solar panels.
  • Grid Priority: Uses grid power as the primary source for charging, supplementing with PV if available.
  • PV Priority: Prioritizes solar power for charging, using grid power only when PV is insufficient.
  • Hybrid Charging: Combines PV and grid power for optimal charging efficiency.

The system also supports scheduled charging/discharging, equalization charging, and customizable current and State of Charge (SOC) thresholds.

Illustration of charging and output modes
Figure 8: Illustration of the four charging modes (Solar First, Utility First, Solar and Utility, Only Solar) and two load output working modes (Solar First, Utility First) for the hybrid solar inverter.

4.4 Load Output Working Modes

Two primary load output modes are available:

  • Solar First: Prioritizes solar energy to power loads, drawing from the battery or grid only when solar is insufficient.
  • Utility First: Prioritizes utility grid power for loads, using solar/battery as backup.
Inverter in a modern home setting with solar panels
Figure 9: Lifestyle image showing a modern house with solar panels, emphasizing energy cost reduction through different charging modes.

4.5 Communication and Monitoring

The inverter includes built-in Bluetooth and Wi-Fi, supporting app-based cloud monitoring. This allows for remote monitoring, automatic time synchronization, and Over-The-Air (OTA) updates. It also features RS485/CAN/dry contacts for comprehensive communication and networking with other devices, including Battery Management Systems (BMS).

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your inverter.

  • Cleaning: Periodically clean the exterior of the inverter with a dry, soft cloth. Do not use liquid cleaners or solvents. Ensure ventilation openings are free from dust and debris. The intelligent cooling fans (see Figure 10) should be kept clear.
  • Connections: Annually inspect all electrical connections for tightness and signs of corrosion.
  • Environment: Ensure the operating environment remains within the specified temperature and humidity ranges.
  • Firmware Updates: Regularly check for and apply firmware updates via the app for improved performance and new features.
Features: High-Current MPPT, Intelligent Cooling Fan, Smart Chip
Figure 10: Features: High-Current MPPT (30A charging, 100A PV input), Intelligent Cooling Fan (2 fans for heat dissipation), Smart Chip (collects PV and battery current for standardized sampling and accurate protection).

6. Troubleshooting

The inverter is equipped with a comprehensive safety protection system and automatic recovery from fault alerts. If an issue occurs, check the following:

  • Display Messages: Check the touchscreen for any error codes or warning messages. The inverter stores 256 event logs, which can help diagnose issues.
  • Power Sources: Verify that PV input, battery connections, and utility grid input are all properly connected and supplying power.
  • Output Loads: Ensure that connected loads do not exceed the inverter's rated power.
  • Ventilation: Confirm that the inverter's cooling fans are operating and not obstructed.
  • Reset: If the inverter is unresponsive, try turning it off using the ON/OFF switch, waiting a few minutes, and then turning it back on.

For persistent issues, contact customer support with any error codes or detailed descriptions of the problem.

7. Specifications

Feature Specification
Model NumberFU07-248PC
Rated Power7000W (7KW), Peak 14000W
Battery Voltage48VDC
Max Charge Current120A
Max DC PV Input425VDC (Max 10,500W)
PV Input Voltage Range60V~300Vdc
MPPT Tracking Efficiency99.9%
Output Voltage100-130V (adjustable), 110V/220V selectable
Output Frequency50Hz/60Hz selectable
Battery CompatibilityLead-acid, Lithium Iron Phosphate (LFP), Ternary Lithium
Parallel CapabilityUp to 6 units
CommunicationRS485, CAN, USB, Bluetooth, Wi-Fi
Operating Temperature-10°C to 55°C
Noise Level≤45dB
Protection RatingIP20 (Indoor Use)
Dimensions (L*W*H)46*12*24CM
Weight19KG
CertificationCE
Product features list
Figure 11: Product feature list including: Built-in dustproof components, capable of operating without battery, wider PV input voltage range (60V~300Vdc), excellent MPPT performance (up to 99% efficiency), PV generated energy Total and Daily information, Battery wake-up function, capable of communicating with battery BMS by RS-485 interface, and settable excess solar energy to Grid.

8. User Tips

  • Monitor Performance: Utilize the integrated Bluetooth and Wi-Fi features to connect to the mobile app. Regularly check system performance, energy generation, and battery status for optimal efficiency.
  • Optimize Charging Modes: Experiment with the different charging modes (PV Only, Grid Priority, PV Priority, Hybrid Charging) to find the best balance for your energy consumption patterns and local utility rates.
  • Ensure Ventilation: Always ensure that the inverter has adequate clearance for airflow, especially around the cooling fans, to prevent overheating and maintain efficiency.
  • Check Connections: Periodically inspect all wiring connections to ensure they are tight and free from corrosion, which can degrade performance and pose safety risks.

9. Warranty and Support

For warranty information, technical support, or service requests, please contact your seller or the manufacturer directly. Ensure you have your product model number (FU07-248PC) and purchase details available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.