1. Introduction
This manual provides essential information for the safe and effective use of your Avenli TYPE 1 Filter Cartridge. Designed for swimming pool pumps with a flow rate of 1136 liters per hour, this filter ensures your pool water remains clean and healthy for all users. Only a clean pool is healthy for users, and this filter is a key component in maintaining optimal water quality.
2. Safety Information
- ⚠️ Warning: Not suitable for children under 36 months.
- Always disconnect the swimming pool pump from the electrical supply before performing any installation, maintenance, or cleaning procedures.
- Assembly and maintenance should be carried out by an adult.
3. Product Overview
The Avenli TYPE 1 filter cartridge is a white and blue pleated filter designed to capture debris and impurities from your pool water, ensuring a clean and clear swimming environment.
4. Specifications
| Attribute | Value |
|---|---|
| Brand | Avenli |
| Model Number | TYPE 1 |
| Item Type | Accessories |
| Material | Plastic |
| Pattern Type | Solid |
| Is Electric | No |
| Origin | PL (Poland) |
| Age Range | > 3 years old |
| Product Dimensions | 7.8 x 8.9 cm |
| Weight | 0.16 kg |
| Compatibility | For 300 GAL 1136l/H Enero Pumps |
| Flow Rate | 1136 l/h |
| Dominant Color | White-Blue |
| Size | S |
5. Setup & Installation
Follow these steps to install your Avenli TYPE 1 Filter Cartridge:
- Ensure the swimming pool pump is completely disconnected from the electrical supply.
- Unscrew the lid of the pump's filter housing.
- Carefully remove the gasket and the old filter cover (if replacing an existing cartridge).
- Insert the new Avenli TYPE 1 filter cartridge into the housing, ensuring it sits correctly.
- Replace the filter cover and gasket, then securely screw the lid back on. Ensure a tight seal to prevent leaks.
6. Operating Instructions
Once the filter cartridge is correctly installed and the filter housing is securely closed:
- Reconnect the pump to the electrical supply.
- The pump will now circulate and filter the pool water, removing suspended particles and debris.
- Refer to your specific swimming pool pump's manual for recommended operating times and cycles to maintain optimal water clarity.
7. Maintenance
Regular cleaning and timely replacement of the filter cartridge are crucial for maintaining water quality and pump efficiency.
- Disconnect the pump from the electrical supply.
- Unscrew the lid, remove the gasket and filter cover, and carefully pull out the cartridge.
- Clean the cartridge using high-pressure water, such as from a garden hose, to remove accumulated debris from the pleats.
- If the filter remains heavily soiled, discolored, or shows signs of damage (e.g., tears in the pleats) after cleaning, it must be replaced with a new Avenli TYPE 1 cartridge.
- It is recommended to inspect and clean the filter cartridge weekly, or more frequently depending on pool usage and water conditions. Replace the cartridge every 2-4 weeks, or as needed based on water clarity and pump performance.
8. Troubleshooting
- Reduced Water Flow: If you notice a decrease in water flow from your pump, the filter cartridge may be clogged. Clean or replace the cartridge as necessary. Also, ensure the pump is running correctly and there are no blockages in the system.
- Cloudy Water: Persistent cloudy water often indicates that the filter is saturated, damaged, or not effectively removing particles. Clean or replace the cartridge. Additionally, check your pool's chemical balance.
- Pump Not Functioning: Ensure the pump is properly connected to the power supply and the filter housing is securely closed and sealed. A loose lid or improper cartridge placement can prevent the pump from operating correctly.
9. User Tips
While no specific user tips were provided, general advice for pool filter cartridges includes:
- Always have a spare cartridge on hand for quick replacements, especially during peak swimming season, to minimize downtime.
- Regular cleaning extends the life of the cartridge and maintains optimal filtration efficiency.
- Consider rinsing the filter daily during heavy use to prevent excessive buildup.
10. Warranty & Support
For warranty information, technical support, or any product-related inquiries, please contact the seller or the manufacturer, Avenli, directly. It is advisable to keep your purchase receipt as proof of purchase for any warranty claims.