Introduction
Thank you for choosing the Mornwell Nasal Rinse Irrigation & Water Flosser Combo. This versatile device is designed to provide comprehensive oral and nasal hygiene, offering effective cleaning and relief for various conditions. Please read this manual thoroughly before use to ensure safe and optimal operation.
Important Safeguards
To prevent injury to yourself and others, as well as damage to the product, please observe the following safety guidelines:
- Always use distilled water, filtered water, or previously boiled and cooled water for both nasal irrigation and water flossing. Never use untreated tap water directly.
- Ensure the charging port is completely dry before inserting the charging cable.
- Do not immerse the main unit in water beyond its IPX7 waterproof rating.
- Keep the device out of reach of children.
- If you experience any discomfort during use, discontinue immediately and consult a healthcare professional.
- Do not attempt to repair or modify the device yourself. Contact customer support for assistance.
- This device is intended for personal use only.
Package Contents
The Mornwell F38 combo package includes the following items:
For Water Flosser:
- Host (Water Flosser Unit) x 1
- Standard Nozzle x 3
- Braces Nozzle x 1
- USB Charging Cable x 1
- Instructions Manual x 1
For Nasal Irrigator:
- Host (Nasal Irrigator Unit) x 1
- Nasal Dock x 2
- Salt Packets x 30
- USB Charging Cable x 1
- Instructions Manual x 1
Image: Mornwell Nasal Rinse Irrigation & Water Flosser Combo showing all included components.
Specifications
| Feature | Water Flosser | Nasal Irrigator |
|---|---|---|
| Brand Name | Mornwell | Medcodes (implied by images) |
| Type | Electric Oral Irrigator | Electric Nose Cleaner |
| Material | ABS | ABS+Silicone |
| Power | 6.7W | 2.6W |
| Certification | 3C, CE, FCC | CE, FCC |
| Working Modes | Soft, Normal, Custom (4 or more operating modes) | Clean, Soft (2 nozzle modes) |
| Water Pressure | 10-90 PSI | 0-10 PSI |
| Jet Pulsation Frequency | 1400-1800 times/min (from 1600 to 1999 imp/min) | 1400-1800 times/min |
| Water Tank Volume | 300 ml (from 200 to 299 ml) | 220 ml (solution) + 240 ml (waste) |
| Battery Capacity | 1400 mAh | 1400 mAh |
| Waterproof Rating | IPX7 | IPX7 |
| Charging Type | USB Rechargeable (Type-C/USB) | TYPE-C |
| Charging Time | 4 hours | 4 hours |
| Usage Days (per charge) | Up to 30 days (Up to 90 days for flossing/charge) | 30 days |
| Features | Portable, Prevents Bad Breath | Dual-action rinse and suction, Automatic waste removal, Ergonomic Y-shaped design, 180° rotating base |
Setup
1. Charging the Device
- Take the charging port cover down and insert the appliance plug securely into the appliance socket. Ensure no liquid remains inside the socket before inserting the plug.
- Plug the USB charging cable into a power source (e.g., power bank, phone charger, PC).
- The indicator light will blink while charging. It will turn off once the device is fully charged. A full charge takes approximately 4 hours.
- After charging, recover the cover onto the charging port to protect it.
Image: Water Flosser connected to a USB charging cable, illustrating its portability.
2. Water Flosser Assembly and Filling
- Attach the desired nozzle (Standard or Braces) onto the unit until it clicks into place.
- Open the water tank cap.
- Fill the 300ml water tank with distilled, filtered, or previously boiled and cooled water. Ensure the water temperature does not exceed 40°C.
- Close the water tank cap securely.
Image: Demonstrates two ways to fill the 300ml water tank and its removable design for easy cleaning.
3. Nasal Irrigator Assembly and Filling
- Attach the nasal dock onto the unit.
- Open the water tank cap.
- Pour one salt packet (Nasal Rinse Mix) into the water tank.
- Fill the water tank with distilled, filtered, or previously boiled and cooled water. Ensure the water temperature does not exceed 40°C.
- Gently swirl the unit to mix the saline solution.
- Close the water tank cap securely.
Image: Shows the included 30 salt packets for nasal rinsing.
Image: Illustrates the self-collecting waste water system, preventing backflow.
Operating Instructions
1. Water Flosser Usage
- Once the water tank is filled and the nozzle is attached, press the "Mode" button to select your desired flossing mode:
- Soft: For beginners and sensitive teeth.
- Normal: For daily flossing.
- Custom: Customize the pattern to your satisfaction. Press and hold the mode button for 3 seconds; the LED light will flash. The water pressure increases with each press (levels 1-6). Release the button to select the desired pressure.
- Hold the unit in an upright position with the nozzle tip pointed towards your teeth.
- Keep your mouth slightly open so that the water can flow out.
- Press the "On/Off" button to start irrigating.
Image: Visual representation of Soft, Normal, and Custom flossing modes.
Image: Shows standard jet tips for daily cleaning and braces jet tips for people with braces.
Image: Illustrates the upgraded micro bubble waterfall flow for thorough cleaning.
2. Nasal Irrigator Usage
- After filling the tank with saline solution and attaching the nasal dock, choose your preferred mode:
- Soft: For daily gentle nasal cleansing.
- Clean: For deep, rapid cleaning to relieve congestion and allergies.
- Place the nasal dock into your nostrils.
- Breathe in and out through your mouth while the device irrigates your nose.
- The device features independent dual chambers: waste liquid is automatically recycled into a separate waste liquid chamber.
- Start rinsing from the more blocked nostril. Rotate the nozzle 180° to keep it aligned with that side.
- The self-collecting waste water system prevents backflow by collecting used water in a sealed tank. A full-tank alert helps ensure safe, hygienic use.
Image: Diagram showing independent dual chambers for a deeper, cleaner rinse, with before and after visuals of nasal passages.
Image: Explains Soft and Clean nozzle modes for comprehensive cleaning.
Image: Diagram illustrating how the Medcodes Saline enters one nostril, circulates, and exits through the other, flushing allergens and mucus into the waste tank.
Video: A user demonstrating the setup and use of the nasal irrigator, including filling the water tank with saline solution and performing a nasal rinse.
Maintenance
Proper maintenance ensures the longevity and hygiene of your device:
- Daily Cleaning: After each use, empty any remaining water from the tank. Rinse the water tank and nozzles/nasal dock with clean water.
- Thorough Cleaning: The water tanks and nasal dock are detachable and full-opening, allowing for thorough cleaning of limescale and residue.
- Self-Cleaning Feature (Nasal Irrigator): The nasal irrigator has a built-in self-cleaning cycle that flushes its internal tubing after each rinse.
- Drying: Allow all components to air dry completely before reassembling or storing.
- Storage: Store the device in a cool, dry place away from direct sunlight.
Image: Highlights the IPX7 waterproof rating and removable parts for easy cleaning under running water.
Troubleshooting
If you encounter any issues with your Mornwell device, please refer to the following common solutions:
- Device not turning on: Ensure the device is fully charged. If not, connect it to the charger for 4 hours.
- Weak water pressure: Check if the water tank is sufficiently filled. Ensure the nozzle/nasal dock is correctly attached. For the water flosser, adjust to a higher mode (Normal or Custom).
- Leakage: Ensure all caps and attachments are securely fastened. Check for any cracks or damage to the water tank or seals.
- Nasal Irrigator waste tank full alert: Empty the waste tank and clean it as per maintenance instructions.
- Unusual sensation during nasal rinse: This is common initially. Ensure you are breathing through your mouth and relaxing. Start with the 'Soft' mode until you get accustomed to the sensation.
If the problem persists, please contact customer support for further assistance.
User Tips
- Patience is Key: The sensation of nasal irrigation can be unusual at first. Start with the 'Soft' mode and allow yourself time to get accustomed to it. Many users find it becomes comfortable and highly beneficial with regular use.
- Water Quality: Always use distilled, filtered, or previously boiled and cooled water for both oral and nasal use to prevent potential health issues.
- CPAP Users: If you use a CPAP machine, consider using the nasal irrigator right before bed to clear your nasal passages. This can help ensure clear breathing and better sleep while wearing your mask.
- Regular Use: Consistent use of both the water flosser and nasal irrigator can significantly improve overall oral and sinus health, leading to clearer breathing and reduced allergy symptoms.
Warranty and Support
The Mornwell Nasal Rinse Irrigation & Water Flosser Combo comes with a 2-year limited warranty, ensuring peace of mind regarding product quality and performance. For any questions, technical support, or warranty claims, please refer to the full user manual (PDF) or contact Mornwell customer service.
For detailed instructions and additional information, please refer to the comprehensive User Manual (PDF).