1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Uckazy 10.25" Android 14 Car Multimedia Screen Player. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.
The multimedia screen player is designed for Mercedes Benz W212 E-Class models (E200, E230, E260, E300) from 2009-2016, supporting NTG 4.0, 4.5, and 5.0 systems. It features an Octa-core processor, 6GB RAM, 128GB ROM, a 1920x720 HD IPS screen, Wireless CarPlay, Android Auto, GPS Navigation, Wi-Fi, 4G SIM card support, Bluetooth 5.0, USB connectivity, and retains original car functions.
1.1 Applicable Models & Years
- For Benz W212 E-class NGT 4.0 E200 E230 E260 E300 S212 (2009-2012) four door
- For Benz W212 E-class NGT 4.5 E200 E230 E260 E300 S212 (2013-2014) four door
- For Benz W212 E-class NGT 5.0 E200 E230 E260 E300 S212 (2015-2016) four door
Important Compatibility Notes:
- This product is only suitable for Mercedes-Benz W212 four-door models. It is NOT suitable for C207 W207 2-door models. Please verify your car model carefully before purchase.
- The right-hand drive (RHD) configuration requires an additional customized frame, and the standard frame is not suitable for RHD vehicles.
2. Setup and Installation
2.1 Pre-Installation Check and Initial Power-Up
- Check Accessories: Verify that all accessories listed in the package are present.
- Connect Main Harness: Plug the screen's main harness into the car's original radio power cable.
- Install Other Cables: Connect all other labeled cables to their respective ports in the car.
- Initial Power On: Start the engine. The screen should turn on. Check if all connections and the screen are working normally.
Post-Installation Checks:
- Original System Display Anomaly: If the original system shows abnormal behavior, navigate to NTG settings (password is 8888) and select the correct car mode. Continue adjusting until the original Mercedes-Benz system display area matches the size of the original car screen.
- Sound Issues: If the sound is abnormal or absent, switch the audio source to AUX or AMI on the original Mercedes-Benz system. Note that some car models may require connecting the original fiber optic cable.
Figure 2.1.1: Visual comparison of the dashboard before and after installing the multimedia screen.
2.2 Confirm Your Car's NTG System Version
It is critical to identify your car's original NTG system (NTG 4.0, 4.5/4.7, or 5.0) as this affects wiring and compatibility. Use the visual guide below to confirm your system based on the original UI and the type of LVDS plug.
Figure 2.2.1: NTG System Differentiation Guide. NTG 4.0 typically uses a 10PIN LVDS plug, while NTG 4.5/4.7 and NTG 5.0 use a 4PIN LVDS plug. Some NTG 5.0 systems may use a 6PIN LVDS plug.
Audio Transmission Method by NTG Version:
- NTG 4.0 & NTG 4.5: Sound is transmitted via AUX or AMI.
- NTG 5.0: Sound is transmitted via an Audio box.
2.3 Included Accessories and Product Structure
Familiarize yourself with the components included in your package and the key connectors on the multimedia unit.
Figure 2.3.1: Overview of included accessories. The Power/Audio Adapter is specific to NTG 5.0 systems.
Key Connectors on the 10.25-inch Product:
- IPS touch display screen
- SIM card slot
- Connectors for power cable
- GPS antenna connector
- 4G antenna connector
- SIM card slot cable
- USB connector (x2)
- RST (Reset button)
- MIC (Microphone input)
3. Operation Instructions
3.1 Home Menu
The home menu provides access to various functions. You can slide or click the screen to enter functions such as GPS, settings, and more.
Functions Introduction:
- Music: Supports local music and USB music playback.
- Navi: For navigation functions.
- Z-LINK: For Apple CarPlay and Android Auto connectivity.
- Benz: To enter the car's original system.
- Video: Supports local video and USB video playback.
- Browser: Allows browsing the internet, downloading apps, and more.
- Settings: Accesses Android settings, factory settings, and other configurations.
- Apps: To enter the Android application page.
3.2 Main Interface Icons
The top and bottom sections of the main interface feature several icons for quick actions:
- Turn Black the Screen: Toggles the screen display off.
- Background Apps Selection: Manages running background applications.
- Back to Home Menu: Returns to the main home screen.
- Back: Navigates to the previous screen.
- Full-screen Display: Toggles full-screen mode.
3.3 Android Interface and Applications
The Android system provides a rich application interface. You can download required applications from the application market by connecting to the internet.
Figure 3.3.1: APP Store interface for downloading applications.
Music Function
Click the "Music" icon to enter the music function. You can select local music or music from a USB drive.
Video Function
Click the "Video" icon to enter the video function. You can select local or USB video files. The system supports 4K video playback and is compatible with most video formats.
Figure 3.3.2: 4K Video Player in action.
Map/GPS Navigation
Click the "Navi" icon to enter Google GPS navigation (default) for online navigation. The system supports various navigation systems and maps for up-to-date route information and precise orientation.
Figure 3.3.3: GPS Navigation interface with supported map applications.
File Manager
Click the "FileManager" icon to enter the file manager function. Here you can check files on the screen and connected USB drives.
Dashboard
Click the "Instrument" icon to enter the car dashboard page. This displays original car instrument information and seat belt reminders. You can slide left and right to choose from a variety of instrument panel color displays.
Figure 3.3.4: Dashboard theme color selection.
3.4 Bluetooth Functionality
Click the "Bluetooth" icon to enter the Bluetooth function. After connection, you can play Bluetooth music and make hands-free phone calls.
Figure 3.4.1: High Quality Bluetooth Call interface.
Bluetooth Connection Steps:
- Device Name: Click to customize the Bluetooth name.
- PIN Code: The default pairing code is "0000".
- Search and Connect: Search for the screen's Bluetooth name on your mobile device.
- Confirm Connection: Enter the PIN code "0000" on your mobile device to confirm the connection.
Bluetooth Phone Call:
- Click the phone icon to enter the Bluetooth dialing interface.
- Click the call records icon to view call history.
3.5 Wireless CarPlay and Android Auto
The system supports both Wireless CarPlay and Android Auto, allowing you to use various applications like navigation and music in driving situations.
Figure 3.5.1: Wireless CarPlay and Android Auto functionality.
To activate CarPlay/Android Auto (after connecting Bluetooth):
- Click the "Z-LINK" icon.
- Select "iPhone" for CarPlay or "Android" for Android Auto on the screen.
- For Android Auto: Scan the QR code to download the LINDK INNOVATION APP. After downloading, select wireless connection on your mobile device and follow the mobile connection wizard.
3.6 4G + Wi-Fi Setting
The device supports 4G LTE with a SIM card slot (SIM card not included) and built-in Wi-Fi, allowing you to surf the internet, enjoy online music, videos, and maps.
Figure 3.6.1: 4G LTE support with SIM card slot.
Network Shortcut Settings:
Swipe down from the top right corner of the screen to access network shortcut settings.
- Wi-Fi Button: Click to connect to Wi-Fi. Long press to enter the Wi-Fi settings interface.
- Data Button: Click to use SIM card internet. Long press to check card data usage.
- Hotspot Button: Click to share internet. Long press to enter the Wi-Fi sharing interface.
- Restart Button: Restarts the screen.
3.7 Split Screen Function
The split screen function supports displaying two applications simultaneously, enhancing your entertainment and navigation experience.
Figure 3.7.1: Split Screen Functionality (Navigation + Music, Picture + Video).
4. System Settings
Access the main settings menu by clicking the "Settings" icon on the home screen or by navigating through the Android interface.
4.1 General Settings
- Volume: Adjust music, navigation, Bluetooth phone, bass, and alto levels.
- Navigation: Select your preferred map application.
- BackCar: Configure reverse image settings. Turn on "Original" if your car has an original rear camera. You can also set "BackCar mirror" and "BackCar trace".
- About: Displays Android version, factory settings, factory data reset, NTG settings, and device information (e.g., 8581, DDR 4GB, Emmc 64GB).
- System Setting: Accesses advanced system configurations.
4.2 Factory Settings
To access factory settings, navigate to "About" and then "Factory setting". The password is 8888.
Within Factory Settings:
- Benz Settings: Select the correct resolution for your display. You can also configure "S-level buttons" and door information.
- Original System Resolution Setting: Found under "Setting" -> "About" -> "NTG setting".
- Factory Data Reset: Resets the device to its factory default state.
Other functions are generally set by default, but you can adjust them according to your personal habits.
4.3 Personal Settings (System Setting)
Enter "System Setting" to access personal preferences.
- Network & Internet: Configure Wi-Fi, mobile data, and hotspot settings.
- Connected Devices: Manage Bluetooth and other connected devices.
- Apps & Notifications: Manage installed applications and notification preferences.
- Display: Adjust screen brightness, wallpaper, and other display options.
- Storage: View storage usage.
- Security: Manage screen lock and other security features.
- Accounts: Manage Google and other accounts.
- System: Access languages, gestures, time, and backup options.
- About Car Machine: Provides detailed information about the device.
4.4 Language and Date & Time
- Languages: Click "Languages & input" -> "Languages" to set the screen display language.
- Date & Time: Click "Date & time" to set the screen date. The screen will automatically adjust to local time when connected to the internet or GPS.
5. Maintenance
To ensure the longevity and optimal performance of your multimedia screen player, follow these general maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the display or finish.
- Software Updates: Periodically check for and install software updates to ensure the system runs efficiently and securely.
- Environmental Conditions: Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Cable Connections: Ensure all cables are securely connected. Loose connections can lead to intermittent issues.
6. Troubleshooting
This section addresses common issues you might encounter and provides solutions.
- Original System Abnormal: If the original car system display is abnormal, go to NTG settings (password 8888) and select the correct car mode to match the original screen size.
- No Sound or Abnormal Sound: Switch the audio source to AUX or AMI on your original Mercedes-Benz system. For some models, ensure the original fiber optic cable is connected.
- Screen Not Turning On: Double-check all power cable connections. Ensure the car's engine is started.
- Bluetooth Connection Issues: Verify the PIN code (default 0000) and ensure the device is discoverable. Try restarting both the multimedia screen and your mobile device.
- CarPlay/Android Auto Not Working: Ensure Bluetooth is connected first. For Android Auto, confirm the LINDK INNOVATION APP is installed and configured correctly on your phone.
- Internet Connectivity Issues: Check Wi-Fi connections or ensure the 4G SIM card is properly inserted and has an active data plan.
7. Specifications
Below are the key specifications for the Uckazy 10.25" Android 14 Car Multimedia Screen Player. Note that some specifications may vary slightly depending on the specific model (Linux vs. Android).
Figure 7.1.1: Detailed Product Information for Linux and Android models.
| Feature | Specification |
|---|---|
| Is touch screen | Yes |
| Built-in Screen | Yes |
| Din | Double Din |
| RAM | 6G |
| Interface | USB |
| Operating System | Android 14 (for Android models), Linux (for Linux models) |
| Out Power | 45W*4 |
| Voltage | 12 V |
| Item Weight | 2.5kg |
| Output Type | Colored |
| Max External Memory | 128G |
| Special Features | Built-In Speaker/Microphone, Wi-Fi function, Support 3G/4G Network, Support Can-Bus, Built-in GPS, Mobile Phone, MP3 players, CarPlay, Android Auto, Support steering wheel control |
| Digital Media Format | CD, VIDEO CD, Mp3, JPEG |
| OSD Language | Multi-language support including English, Chinese, German, Russian, French, Spanish, etc. |
| Resolution | 1920*720 |
| Display Size | 10.25" |
| Origin | Mainland China |
| ROM | 128G |
| Certification | CE |
| Material | Plastica e metallo (Plastic and metal) |
| Package Dimensions (L x W x H) | 36 cm x 18 cm x 19 cm |
8. Warranty and Support
8.1 Warranty Information
This product comes with a 2-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
Important Notice:
- The customer is responsible for return shipping fees for warranty claims.
- Professional installation is recommended. The manufacturer is not responsible for issues arising from improper installation or uninstallation.
- Damage or installation affecting components may void the warranty.
8.2 Additional Resources
For a complete user manual and additional documentation, please refer to the official PDF document:
9. User Tips
While no specific user reviews or Q&A were provided, here are some general tips for optimizing your experience with the multimedia screen player:
- Regular Updates: Keep your Android system and installed applications updated to benefit from the latest features and security patches.
- Screen Protection: Consider using a screen protector to prevent scratches and reduce glare.
- Customization: Explore the various settings, including dashboard themes and DSP equalizer adjustments, to personalize your driving experience.
- Safe Driving: Always prioritize safe driving. Avoid operating complex functions or watching videos while the vehicle is in motion.