1. Introduction
This Portable Precise Digital Thickness Gauge (Model C01551) is a versatile and accurate instrument designed for measuring the thickness of various materials, including metal, paper, and film. It features an extra-large LCD screen for easy reading, a durable satin-chrome finish, and carbide measuring faces for longevity. The device offers data hold, data output, auto search for maximum and minimum values, and both absolute/relative measuring modes. It supports metric and inch unit conversion, ensuring precise measurements for professional and DIY applications.
2. Safety & Warnings
Read all instructions carefully before using this device to ensure safety and prevent damage.
- Warning: Children. Keep the device and its cord out of reach of children under 3 years old.
- WARNING: Keep out of reach of children.
- In case of ingestion (e.g., battery), seek medical attention immediately.
3. Product Components
Familiarize yourself with the parts of your digital thickness gauge:
- Metal Probe: The movable measuring surface.
- MM/INCH Switch: Button to toggle between millimeters and inches.
- Battery Case: Compartment for the LR44 button battery.
- Hanging Hole: For convenient storage.
- ZERO Button: To set the display to zero at any position.
- ON/OFF Button: To power the device on or off.
- Aluminum Frame: The main body of the gauge.
4. Specifications
| Feature | Specification |
|---|---|
| Measuring Range | 0-12.7mm |
| Resolution | 0.01mm |
| Measurement Error | ≤0.02mm |
| Head Diameter | 5mm |
| Size (L x W x H) | 95 x 55 x 40 mm (approximate) |
| Battery Type | LR44 button battery |
| Product Packaging | Plastic box |
| Package Dimensions | 18cm (L) x 15cm (W) x 5cm (H) |
| Package Weight | 0.206 kg |
5. Setup
5.1 Battery Installation
The digital thickness gauge requires one LR44 button battery (not included). Follow these steps to install the battery:
- Locate the battery case on the back of the gauge (refer to the Product Components diagram).
- Carefully slide open the battery cover.
- Insert one LR44 button battery with the positive (+) side facing upwards.
- Close the battery cover securely.
6. Operating Instructions
6.1 Basic Operation
- Power On/Off: Press the ON/OFF button to turn the gauge on or off.
- Open Jaws: Press the red handle/lever to open the metal probe jaws.
- Zero Setting: Before taking a measurement, ensure the measuring surfaces are clean and then press the ZERO button to set the display to 0.00.
- Unit Conversion: Press the MM/INCH button to switch between millimeters (mm) and inches (inch).
6.2 Taking a Measurement
- Ensure the gauge is powered on and zeroed.
- Press the handle to open the measuring jaws.
- Place the material to be measured between the metal probe jaws.
- Release the handle gently, allowing the jaws to close onto the material.
- Read the thickness measurement directly from the large LCD screen.
6.3 Advanced Features
- Data Hold: The gauge can hold the displayed measurement. Consult the full PDF manual for specific instructions on activating this feature.
- Absolute/Relative Measuring: Allows for measuring from a set reference point.
- Auto Search for Max/Min Values: Useful for identifying variations in thickness across a surface.
7. Maintenance
- Cleaning: Always clean the measuring surfaces with a soft, dry cloth before and after use to ensure accuracy. Do not use solvents or harsh chemicals.
- Storage: When not in use, store the gauge in its protective plastic box to prevent damage and keep it free from dust and debris.
- Battery Replacement: Replace the LR44 battery when the display becomes dim or unresponsive.
8. Troubleshooting
- Display is blank or dim: Check if the LR44 battery is correctly installed or needs replacement.
- Inconsistent readings: Ensure the measuring surfaces are clean and free of dust or debris. Re-zero the gauge before each measurement. Avoid applying excessive force when closing the jaws.
- Gauge does not turn on: Verify battery installation and charge. If issues persist, the battery may be depleted or incorrectly inserted.
9. User Tips
- Always ensure the measuring surfaces are perfectly clean before taking a measurement to avoid inaccuracies.
- Press the ZERO button before each new measurement, especially if changing the material or position, to maintain high precision.
- For very delicate materials, apply minimal pressure when closing the jaws to prevent deformation and ensure an accurate reading.
10. Warranty & Support
For detailed warranty information and support, please refer to the official user manual PDF or contact the manufacturer directly.
Manufacturer: Jinhua Ninth World E-commerce Co., Ltd.
Address: Jinhua Zhejiang Province, F, No.82 Houming Road, Quantang Village, Lipu Town, Jindong District, Jinhua City, Zhejiang, 321000
EU Authorized Representative: APEX CE SPECIALISTS LIMITED
Address: UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND T23AT2P
Additional Resources: A comprehensive user manual in PDF format is available for download. View User Manual (PDF)