WUZHI AUDIO ZK-AS21P

Contents

WUZHI AUDIO AS21P 2.1 Channel Bluetooth Digital Speaker Amplifier Module

Model: ZK-AS21P

1. Introduction

This manual provides detailed instructions for the WUZHI AUDIO AS21P 2.1 Channel Bluetooth Digital Speaker Amplifier Module. This high-performance Class D power amplifier is designed to deliver superior sound quality with advanced features for various audio applications. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

2. Safety Information

  • The product is designed for DC power supply only. AC power supply is strictly prohibited.
  • The module does not have input anti-reverse polarity protection. Ensure positive and negative poles are connected correctly; reversing them will cause damage.
  • Avoid exposing the module to moisture, extreme temperatures, or direct sunlight.
  • Do not attempt to disassemble or modify the module beyond the instructions provided in this manual.
  • Keep out of reach of children.

3. Package Contents

The standard package includes the WUZHI AUDIO AS21P amplifier board. Please note that power and audio cables are not included and must be purchased separately.

Product packaging for external potentiometer version

Figure 3.1: Product packaging (External Potentiometer Version)

Product packaging for integrated potentiometer version

Figure 3.2: Product packaging (Integrated Potentiometer Version)

4. Specifications

Feature Description
Brand Wuzhi Audio
Model Number ZK-AS21P
Product Name 2.1 Channel Power Amplifier Board 300W+300W+600W
Adapted Power Supply 18-50VDC (Limit 53V). Recommended: 36-48VDC, 12A or above.
Maximum Power (Left/Right Channel) 300W@50V, 4Ω; 160W@50V, 8Ω
Maximum Power (Subwoofer) 600W@50V, 2Ω; 300W@50V, 4Ω; 160W@50V, 8Ω
Bluetooth Chip JL 5.1, transmission distance 15 meters
Input Method Bluetooth (BT) + AUX + USB disk/Sound Card
Number of Channels 2.1 (Left, Right, Subwoofer)
Power AMP Chip Two original TPA3255
Protection Mechanism Input under voltage, overheating, over current, short circuit protection.
Product Size (External Potentiometer) 131.5mm x 120mm x 40mm
Product Size (Integrated Potentiometer) 150mm x 120mm x 40mm
Package Weight (External Potentiometer) Net: 453g, With Package: 572g
Package Weight (Integrated Potentiometer) Net: 387g, With Package: 437g
Diagram showing the dimensions of the amplifier board

Figure 4.1: Product Dimensions

5. Key Features

  • High-Performance Amplification: Utilizes two original Texas Instruments TPA3255 Class D power amplifier chips for real high-end sound quality with ultra-low distortion.
  • Efficient Heat Dissipation: Features a thickened heat sink and a silent, long-life fan to manage high power operation effectively.
  • Premium Audio Components: Equipped with six Nichicon purple robe HIFI electrolysis capacitors for transparent sound, fast low-frequency response, strong mid-frequency texture, high-frequency smoothness, and minimal tangent loss.
  • Low Noise Amplifiers: Incorporates six JRC2068 amplifiers for extremely low noise, pure sound quality, and minimal distortion.
  • Dedicated Inductors: Four dedicated inductors for high-power digital amplification, offering high current, low magnetic loss, small parasitic capacitance, and strong EMI performance.
  • Robust Power Connection: Gold-plated high current shielded DC holder ensures stable power input.
  • Enhanced Output Power: Window tin spraying design on the PCB increases output power.
  • Versatile Input Options: Supports Bluetooth, AUX, USB disk, and sound card inputs.
  • APP Control: Compatible with Wuzhi Audio APP for Android and iOS devices.
Close-up of amplifier board components including inductors, DC holder, and capacitors

Figure 5.1: High-Quality Components (Inductors, DC Holder, Capacitors)

Close-up of amplifier board components including heatsink, Nichicon capacitors, and JRC2068 amplifiers

Figure 5.2: Heat Dissipation and Amplifier Components

Close-up of TPA3255 power amplifier chips

Figure 5.3: TPA3255 Power Amplifier Chips

Diagram showing window tin spraying design on the PCB

Figure 5.4: Window Tin Spraying Design for Increased Output Power

6. Setup and Connections

Before making any connections, ensure the power supply is disconnected.

6.1. Overview of Connections and Controls

Diagram showing all input/output ports and control knobs on the amplifier board

Figure 6.1: Amplifier Board Connections and Controls

  1. Power Input (A): Connect 18-50VDC power supply (5.5-2.5 DC mother base or 2P wiring terminal).
  2. Subwoofer Speaker Output (B): Connect your subwoofer speaker.
  3. Left Channel Speaker Output (C): Connect your left channel speaker.
  4. Right Channel Speaker Output (D): Connect your right channel speaker.
  5. USB Disk/Sound Card Input (E): Connect a USB disk or use as a sound card input.
  6. LINE IN Input (F): Connect external audio sources via a 3.5mm audio port.
  7. Subwoofer Frequency Control (G): Adjust the subwoofer frequency (20-200Hz).
  8. Subwoofer Volume Control (H): Adjust the subwoofer volume.
  9. Left and Right Channel Treble Control (I): Adjust the treble for left and right channels.
  10. Left and Right Channel Bass Control (J): Adjust the bass for left and right channels.
  11. Main Volume Control (K): Multifunctional button for main volume, play/pause, next/previous track, and power on/off.

6.2. Extension Interface Overview

Diagram showing the extension interfaces on the amplifier board

Figure 6.2: Extension Interface Details

  • SUBWOOFER Small Signal Output (A): Connects to the input port of a pure rear power amplifier board for subwoofer expansion.
  • Expansion Port 1 (B): Connects to the audio input of a MIC front stage board or a 2.0 pure rear stage amplifier input port.
  • Expansion Port 2 (C): Used for various modifications, such as connecting to a microphone front stage board reverb output.
  • Three 0 Ohm Resistors (D): R76, R75, and R74. These must be removed when using Expansion Port 1 and Expansion Port 2 for modifications.

6.3. Playing Method 1: Subwoofer Expansion

This method allows you to expand the subwoofer capabilities using an additional HiFi amplifier.

Wiring diagram for subwoofer expansion using an external HiFi amplifier

Figure 6.3: Subwoofer Expansion Wiring

  1. Connect the subwoofer speaker to the designated terminals (A and C) on the external HiFi amplifier.
  2. Provide power to the external HiFi amplifier (B) with 15-35VDC.
  3. Connect the SUBWOOFER small signal output (E) from the ZK-AS21P board to the input port of the pure rear power amplifier board (F).
  4. Ensure the ZK-AS21P board is powered (D) with 18-50VDC.
  5. Adjust the potentiometer (G) on the external amplifier as needed.

6.4. Playing Method 2: Modify Qualcomm Bluetooth

This method details how to integrate a Qualcomm decoding board for enhanced Bluetooth functionality.

Wiring diagram for modifying with a Qualcomm Bluetooth decoding board

Figure 6.4: Qualcomm Bluetooth Modification Wiring

  1. Important: When using Expansion Port 1 and Expansion Port 2, remove the three 0 ohm resistors (R76, R75, R74) from the ZK-AS21P board (B).
  2. Connect the Qualcomm decoding board (F) to Expansion Port 2 (C) on the ZK-AS21P board.
  3. Provide power to the Qualcomm decoding board (D) with 8-32VDC.
  4. Ensure the ZK-AS21P board is powered (A) with 18-50VDC.
  5. Adjust the potentiometer (E) on the Qualcomm decoding board as needed.

6.5. Playing Method 3: Retrofitting Microphone Front Stage Board

This method describes how to integrate a microphone front stage board for audio input and reverb effects.

Wiring diagram for retrofitting a microphone front stage board

Figure 6.5: Microphone Front Stage Board Retrofitting Wiring

  1. Important: When using Expansion Port 1 and Expansion Port 2, remove the three 0 ohm resistors (R76, R75, R74) from the ZK-AS21P board (B).
  2. Connect the microphone front stage board (D) to Expansion Port 1 (C) for reverb input.
  3. Connect the microphone front stage board (D) to Expansion Port 2 (E) for reverb output.
  4. Provide power to the microphone front stage board (F) with 8-26VDC.
  5. Connect your microphone to the microphone input (G) on the front stage board.
  6. Ensure the ZK-AS21P board is powered (A) with 18-50VDC.
  7. Adjust the potentiometer (H) on the front stage board as needed.

6.6. External Antenna Welding Example

If you wish to use an external 2.4G antenna, follow the welding examples below. Note that the antenna and pedestal should be purchased separately.

Examples of welding an external antenna base and an external antenna directly

Figure 6.6: External Antenna Welding Examples

  • Antenna Base Welding: Solder the antenna base to the designated pads, paying attention to the GND (Ground), NC (No Connection), and ANT (Antenna) pins.
  • Antenna Welding: Solder the 2.4G antenna directly to the board if an antenna base is not used.

6.7. Adjusting Gain (R and L Resistors)

The R and L resistors can be changed to fine-tune the gain difference between the left and right channels and ensure sufficient signal strength and output power. A larger resistance value results in greater gain.

Close-up of R and L resistors for gain adjustment

Figure 6.7: R and L Resistors for Gain Adjustment

7. Operation

7.1. Power On/Off

  • Power On: Long press the Main Volume control knob (K) to turn the module on.
  • Power Off: Long press the Main Volume control knob (K) again to turn the module off.

7.2. Audio Input Selection

The module supports multiple input methods:

  • Bluetooth (BT): The module will automatically enter Bluetooth pairing mode when powered on. Search for "Wuzhi Audio" on your device and pair. The transmission distance is up to 15 meters.
  • AUX: Connect an audio source to the LINE IN input (F) using a 3.5mm audio cable.
  • USB Disk/Sound Card: Insert a USB disk into the USB input (E) for playback, or connect to a computer to use the module as a sound card.

7.3. Main Volume and Playback Control

The Main Volume control knob (K) also functions as a playback control:

  • Click: Play/Pause audio playback.
  • Double Click: Skip to the next track.
  • Three Clicks: Go to the previous track.

7.4. Tone and Subwoofer Adjustment

  • Subwoofer Frequency (G): Rotate the knob to adjust the cutoff frequency for the subwoofer output (20-200Hz).
  • Subwoofer Volume (H): Rotate the knob to adjust the volume level of the subwoofer.
  • Left and Right Channel Treble (I): Rotate the knob to adjust the high-frequency response of the main stereo channels.
  • Left and Right Channel Bass (J): Rotate the knob to adjust the low-frequency response of the main stereo channels.

7.5. Wuzhi Audio APP

The Wuzhi Audio APP is available for both Android and iOS devices, providing additional control and settings for your amplifier module.

Screenshot of Wuzhi Audio APP interface on Android Screenshot of Wuzhi Audio APP interface on iOS

Figure 7.1: Wuzhi Audio APP for Android and iOS

8. Troubleshooting

  • No Power: Ensure the DC power supply is within the 18-50VDC range and connected with correct polarity. Check for loose connections.
  • No Sound: Verify all audio input sources are correctly connected and selected. Check speaker connections and ensure they are not short-circuited. Confirm volume levels are not at minimum.
  • Distorted Sound: Check if the input power supply is stable and sufficient (recommended 36-48VDC, 12A or above). Ensure speaker impedance matches the amplifier's capabilities. Reduce volume if distortion occurs at high levels.
  • Bluetooth Connection Issues: Ensure the module is in pairing mode. Check that no other device is currently connected to the module via Bluetooth. Try restarting both the module and your Bluetooth device.
  • Overheating: The module has overheating protection. Ensure adequate ventilation around the heatsink and fan. Do not block the fan.
  • Protection Mechanism Triggered: The module features input under voltage, overheating, over current, and short circuit protection. If the module stops functioning, check for these conditions. Disconnect power, resolve the issue, and then reconnect.

9. User Tips

No specific user tips from reviews or Q&A were available for this product at the time of writing.

10. Maintenance

  • Keep the amplifier module clean and free from dust. Use a soft, dry cloth for cleaning.
  • Ensure proper airflow around the module to prevent overheating.
  • Avoid dropping or subjecting the module to strong impacts.
  • Store the module in a cool, dry place when not in use for extended periods.

11. Warranty and Support

Wuzhi Audio provides lifetime free technical consultation for its products. For any technical assistance or support, please contact the manufacturer directly. Please refer to your purchase documentation for specific warranty terms and conditions.

11.1. Authenticity Verification

Beware of imitations. Authentic Wuzhi Audio products feature specific markings:

Image showing anti-piracy markings on the amplifier board

Figure 11.1: Anti-Piracy Markings

Marking Description
A: Fan Logo The fan has a copyright logo.
B: Heatsink Trademark Authentic heatsink features chamfering, wire drawing process, and laser engraved WUZHI AUDIO trademark.
C: PCB Trademark The WUZHI AUDIO trademark logo is present on the PCB.
D: Capacitor Trademark Each large capacitor has the WUZHI AUDIO trademark.
Close-up of Wuzhi Audio trademark on heatsink and PCB

Figure 11.2: Close-up of Wuzhi Audio Trademarks

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.