Moby-System Huxley

Contents

Moby-System Travel Cot Huxley User Manual

Model: Huxley

Important Safety Warnings

Please read this user manual carefully before assembly and use. Failure to follow these instructions may result in serious injury.

  • Fire Hazard: Do not place the travel cot near open flames or any other heat sources.
  • Product Integrity: Do not use the travel cot if any part is damaged, torn, or incomplete. Only use replacement parts approved by the manufacturer.
  • Suffocation Risk: Do not place other items such as stuffed animals or toys with strings in the cot. Keep packaging and plastic wrap away from children.
  • Mattress Use: Do not use more than one mattress in the cot.
  • Assembly: Assembly must be carried out by an adult.
  • Stability: Before placing the child in the cot, ensure the wheels are locked by depressing the brake levers.
  • Weight Limit: The maximum load for this travel cot is 15 kg.
  • Certification: The Moby-System Huxley cot meets the strict EN 716-1:2017 + AC:2019 standard, ensuring high quality and safety. The design features rounded corners and a special safety system to prevent spontaneous folding during use.

Included Parts

Before assembly, please verify that all the following parts are included in your package:

  • User Manual
  • Mattress
  • Travel Cot (main unit)
  • Elevator (for second level)
  • Arc with toys (canopy with plush toys)
  • Changer (changing table)
  • Mosquito Net
  • Carry Bag

Setup and Assembly

1. Removing the Travel Cot from the Box

To remove the travel cot from its packaging:

  1. Remove the cot from the box (A) or turn the box upside down (B) to slide it out.
  2. Unzip the travel bag.
  3. Release the Velcro straps securing the folded cot.

Refer to the diagrams on page 13 of the PDF manual for visual guidance on removing the cot from its box.

2. Unfolding the Travel Cot

Ensure you have sufficient space before unfolding the travel cot.

  1. A01: Place the travel cot on its feet.
  2. A02: Lift the travel cot by the final part of the narrower side to fix it, avoiding lifting by the central part. If it stalls, try several times until it locks into place.
  3. A03: After step A02, ensure that the bar does not go down, indicating the procedure was successful.
  4. A04: Repeat the same procedure for the other narrower side (similar to A02 and A03).
  5. A05-A06: Use the same procedure as A02/A03/A04 for the lengthy sides of the travel cot.
  6. A07: Confirm that each lateral (bar) side is firm enough to prevent it from collapsing.
  7. A08: Move a leg out, and ensure you have enough space to fully open the cradle according to A09.
  8. A09: Push the central part of the travel cot downwards as shown in the photo until it locks into place.
  9. A10: The structure of the travel cot is now successfully assembled.
  10. A11: Place the mattress down and use the Velcro tapes to pass them through each slot to fix it firmly to the base.

Refer to diagrams A01-A11 on pages 14-15 of the PDF manual for visual guidance on unfolding the cot.

Moby-System Travel Cot Huxley fully assembled with changing table, canopy, mosquito net, and carry bag.

Moby-System Travel Cot Huxley fully assembled with changing table, canopy, mosquito net, and carry bag.

3. Assembling the Changing Table

  1. C01: Place the short tubes (labeled "A" or "B") into the changer structure, connecting each short tube to a long tube with the same label. Run each short tube through the hole in the changer fabric. Release the Velcro closures, then refasten them once tubes are correctly attached.
  2. C02: Attach the changer to the travel cot, ensuring the 4 plastic laces lock and fix the tubes to the cot. Press the changer firmly until it is securely attached.
  3. C03: The changer must be placed at one end of the travel cot, allowing the other two plastic parts to be fixed to the headboard of that end.
  4. C04: Once the 6 laces (2 on each side and 2 on the headboard) are in place, pull the fabric at the end of the changer to cover the two corners of that end.

Refer to diagrams C01-C04 on page 18 of the PDF manual for visual guidance on changing table assembly.

Close-up of the changing table attachment on the Moby-System Travel Cot Huxley.

Close-up of the changing table attachment.

4. Installing the Elevator (Second Level)

The elevator allows for a higher mattress position, ideal for infants 0-6 months.

  1. Fix the elevator to the travel cot using the zipper.
  2. Once the rear zipper is completely fixed and the buckle attached to the cot, secure it with Velcro.
  3. Place the 4 metal pipes into the fabric loops at the bottom of the elevator. Attach the pipes as shown in the diagram.
  4. Surround the tubes with adhesive fastening tapes located in the center of the height adjuster.
  5. The padded mattress should be placed so it is blocked by the lower corner fastening straps.

Refer to the diagrams on page 19 of the PDF manual for visual guidance on elevator installation.

5. Canopy Assembly

The canopy provides shade and includes a mosquito net.

  1. Press the two plastic hooks on both sides of the canopy to connect them to the long handrails of the playpen.
  2. Adjust the fabric part and press the 2 buckles to match the ones under the corners, one by one.
  3. You can use the mosquito net with the fabric canopy by the zipper.
  4. Attach and detach the included plush toys to the canopy as shown in the photo.

Refer to Fig. 1 on page 20 of the PDF manual for visual guidance on canopy assembly.

Close-up of the canopy with hanging star toys on the Moby-System Travel Cot Huxley.

Canopy with hanging star toys.

Operation

  • Two Mattress Levels: The upper level is suitable for infants aged 0-6 months. The lower level is for older children up to 36 months, providing a secure play area.
  • Side Exit: For older children, a zippered side entrance allows them to independently enter and exit the playpen.
  • Mobility and Stability: The travel cot is equipped with wheels for easy movement. Always engage the wheel brakes when the cot is stationary or in use to ensure stability.
  • Accessory Pocket: A spacious storage pocket is available to keep essential small items within reach.
  • Educational Toys: The canopy includes plush elements that stimulate the child’s senses, supporting their sensory development.
Close-up of a wheel with brake lever on the Moby-System Travel Cot Huxley.

Close-up of a wheel with engaged brake lever.

Folding the Travel Cot

Before folding, remove the changing table, elevator, and toy arc.

  1. B00: Remove the changer, elevator, and toy arc before proceeding with other steps.
  2. B01: Detach the Velcro and remove the mattress from the base of the travel cot.
  3. B02: Locate the red ribbon attached to the base of the cot.
  4. B03-B05: Holding the cot with one hand, lift the tape with the other hand. The optimal way is to lift the tape while two fingers touch the base. The base of the cot must be raised to hand height.
  5. B06-B07: Locate the connector in the middle of the longest side of the cot, squeeze it, and pull it down, maintaining a V-shape as shown in the figure.
  6. B08: Use the same procedure as B06-B07 to fold all the shorter sides.
  7. B09: The cot is now successfully folded.
  8. B10-B14: Wrap the folded cot in the mattress for storage and transport.

Refer to diagrams B00-B14 on pages 16-17 of the PDF manual for visual guidance on folding the cot.

Maintenance

  • The travel cot should be cleaned regularly with a sponge soaked in a mild detergent with a natural pH. This ensures a clean sleeping area for your baby.
  • After washing, wipe the cot with a towel and allow it to air dry completely before folding or storing.
  • Regularly check all components for wear and tear, especially fabric, zippers, and locking mechanisms.

Troubleshooting

  • Cot not opening/folding easily: Ensure the central locking mechanism is fully engaged (pushed down for unfolding, pulled up for folding). Check for any fabric obstructions or misaligned bars. Sometimes, a firm, quick action is needed.
  • Parts not fitting: Double-check the orientation of parts, especially during changing table and elevator assembly. Refer to the specific diagrams in the manual for correct placement.
  • Wheels not locking: Ensure the brake levers are fully depressed. Check for any debris obstructing the wheel mechanism.

Specifications

Feature Detail
Model Huxley
Brand Moby-System
Cot Dimensions (L x W x H) 128 cm x 68 cm x 75 cm
Folded Dimensions (L x W x D) 80 cm x 22 cm x 21 cm
Materials Durable fabric, mesh, metal frame
Age Indication 0-36 months
Maximum Load 15 kg
Certification EN 716-1:2017 + AC:2019
Package Weight 10.7 kg
Package Dimensions (L x W x H) 78 cm x 23 cm x 23 cm

User Tips

  • Always double-check all connections and locking mechanisms after assembly and before placing your child in the cot.
  • When traveling, utilize the carry bag to keep all components together and protected.
  • For optimal air circulation and visibility, ensure the mesh sides are unobstructed.
  • If you have questions about the size of the bed, refer to the detailed specifications provided in this manual.

Warranty and Support

For any questions, concerns, or to inquire about replacement parts, please contact the manufacturer or your retailer.

A comprehensive user manual in PDF format, which includes detailed diagrams for assembly and folding, is available for download. You can access it via the following link: Moby-System Huxley User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.