Introduction
The Lefant M265 is an advanced robot vacuum cleaner designed to provide efficient and hands-free floor cleaning. Featuring dToF Laser Navigation, powerful 20,000Pa suction, and a self-cleaning wet roller system, it ensures a pristine clean for various floor types. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your M265 robot vacuum cleaner.
What's in the Box?
Carefully unpack all components and check against the list below. If any items are missing or damaged, please contact customer support.
Image: All components included in the Lefant M265 package.
- Robot Vacuum Cleaner x 1
- Base Station x 1
- Roller Mops x 2
- Power Cord x 1
- High-Efficiency Filters x 2
- Cleaning Tool x 1
- Side Brushes x 4
- User Manual x 1
Setup Guide
-
Power on the Robot
Press and hold the "Start/Pause" button on the M265 for 3 seconds to turn it on.
-
Download the Lefant App
Scan the QR code provided in the quick start guide or search for "Lefant" in the App Store (iOS) or Google Play Store (Android) to download the official app.
Image: Visual guide for initial setup and app pairing.
-
Enter Pairing Mode
Press and hold the "Start/Pause" button on the robot for 6 seconds. The indicator light will start flashing, indicating it is in pairing mode. You may hear a voice prompt.
-
Add Device in App
Open the Lefant app, tap "Add Device", and select the "M265" model from the device list.
-
Connect to Wi-Fi
Select your home Wi-Fi network and enter the password. The M265 supports 2.4GHz and 5GHz Wi-Fi networks.
-
Pairing Complete
Keep your phone, router, and robot close together until pairing is complete. The app will confirm successful connection.
-
Base Station Placement
Place the base station against a wall in an open area, ensuring there are no obstacles within 1 meter (3 feet) to the sides and 1.5 meters (5 feet) in front. Plug in the power cord.
-
Fill Water Tanks
Fill the clean water tank on the base station with fresh water. Ensure the dirty water tank is empty before starting a cleaning cycle.
Operating Instructions
Cleaning Modes
- Auto Clean: The robot intelligently navigates and cleans your entire home.
- Spot Clean: Directs the robot to intensively clean a specific small area.
- Zone Clean: Use the app to define specific areas for the robot to clean or avoid.
Navigation and Mapping
The M265 uses dToF Laser Navigation for precise mapping and efficient cleaning paths. It supports multi-floor mapping and allows you to set custom no-go zones via the app.
Image: dToF Laser Navigation features including multi-floor mapping, no-go zones, and carpet detection.
- Multi-Floor Mapping: Create and save maps for different levels of your home.
- Custom No-Go Zones: Define areas the robot should avoid, such as pet bowls or delicate furniture.
- Carpet Detection: The robot automatically boosts suction power when it detects carpet for deeper cleaning.
- PSD Obstacle Avoidance: Equipped with 9-set PSD sensors to detect and avoid obstacles, ensuring smooth navigation and preventing collisions.
Powerful Suction
The M265 delivers a powerful 20,000Pa suction to effectively pick up dust, debris, pet kibble, and tangled hair from various surfaces.
Image: Visual representation of the M265's 20,000Pa suction power.
Voice Assistant Integration
Control your Lefant M265 using voice commands through Alexa or Google Assistant for convenient operation.
App Control
The Lefant app provides comprehensive control over your robot, including scheduling, cleaning mode selection, real-time monitoring, and firmware updates.
Image: Lefant app interface for controlling the robot vacuum.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your Lefant M265.
Self-Cleaning Roller System
The base station automatically washes and air-dries the roller mop after each cleaning cycle, ensuring it's always fresh for the next use.
Image: Fully automated care with self-washing and air-drying mop.
- Roller Mop: The 280mm wide roller mop is continuously flushed with fresh water during mopping. The base station performs an auto-clean cycle for the roller and then air-dries it.
- Water Tanks: Regularly empty the dirty water tank (1.5L capacity) and refill the clean water tank (2.4L capacity) in the base station.
Image: Detailed diagram of the fresh-water cycling floor washer system.
Dust Box
The robot features an 800ml dust box. Empty the dust box regularly, especially after each cleaning cycle, to maintain optimal suction performance. The design is bagless, eliminating the need for disposable dust bags.
Image: Intelligent dirt detection and automatic roller brush self-drying with 800ml dust capacity.
Filters
The M265 uses HEPA filters. Clean the filters periodically by tapping them gently to remove dust. Replace filters every 3-6 months, or more frequently depending on usage.
Side Brushes
Check the side brushes for tangled hair or debris. Remove and clean them as needed. Replace worn-out brushes to ensure effective edge cleaning.
Sensors and Charging Contacts
Wipe the dToF laser sensor, PSD sensors, and charging contacts on both the robot and the base station with a clean, dry cloth to ensure proper function.
Troubleshooting
If you encounter issues with your Lefant M265, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not turn on | Low battery; Power button not pressed long enough | Charge the robot; Press and hold the power button for 3 seconds. |
| Robot cannot connect to Wi-Fi | Incorrect Wi-Fi password; Router too far; Incorrect Wi-Fi band (only 2.4G/5G supported) | Verify password; Move robot closer to router; Ensure router is broadcasting 2.4G/5G. |
| Robot gets stuck frequently | Obstacles; Loose cables; Dark surfaces | Clear obstacles; Tidy up cables; Robot may struggle on very dark carpets/floors. |
| Poor cleaning performance | Full dust box; Clogged filter; Worn side brushes; Dirty roller mop | Empty dust box; Clean/replace filter; Clean/replace side brushes; Ensure roller mop is clean. |
| Base station not self-cleaning mop | Empty clean water tank; Full dirty water tank; Clogged nozzles | Refill clean water tank; Empty dirty water tank; Clean nozzles and water paths. |
Specifications
Image: Detailed specifications of the Lefant M265.
| Feature | Detail |
|---|---|
| Model | Lefant M265 |
| Launch Date | July 2026 |
| Max. Suction Power | 20,000Pa |
| Navigation | dToF Laser |
| Obstacle Avoidance | 9-Set PSD Sensors |
| Obstacle Crossing | 16mm |
| Mop Lifting | 8mm Auto-Lifting |
| Mop Type | Roller Mop (280mm wide) |
| In-Process Mop Washing | Supported |
| Auto Dust Emptying | Supported |
| Auto Mop Washing | Supported |
| Auto Water Refilling | Supported |
| No-Go Zone Setting | Supported |
| Voice Assistant | Supported (Alexa, Google Assistant) |
| Charging Time | 4 Hours |
| Dustbin Capacity | 800ml |
| Runtime (Standard Mode) | 120 mins |
| Clean Water Tank Capacity | 2.4L |
| Dirty Water Tank Capacity | 1.5L |
| Battery Type | Li-ion (3200mAh) |
| Weight | 6-10 kg |
| Dimensions (Robot) | 280mm diameter, 99mm height (Slim Design) |
| Wi-Fi Connectivity | 2.4G/5G |
| Certification | CB, CE |
User Tips
- Prepare Your Home: Before cleaning, remove small objects, loose cables, and anything that could tangle the robot or obstruct its path.
- Optimal Base Station Placement: Ensure the base station is placed in an area with good Wi-Fi signal and clear space around it for the robot to dock easily.
- Regular Maintenance: Adhere to the recommended cleaning schedule for the dust box, filters, and brushes to maintain peak performance.
- App Features: Explore all features in the Lefant app, such as setting virtual walls, no-go zones, and custom cleaning schedules, to personalize your cleaning experience.
- Privacy: The M265 is designed with strict privacy protection, featuring a camera-free design and dToF laser navigation, ensuring your home data remains secure.
Warranty and Support
Lefant provides a 2-year warranty for the M265 Robot Vacuum Cleaner. For warranty claims, technical support, or any inquiries, please refer to the contact information provided on the official Lefant website or your purchase documentation. Keep your proof of purchase for warranty validation.