GODIAG BCP U KEY BDC2 BDC3 14-in-1 Adapter

Contents

GODIAG BCP U KEY BDC2 BDC3 14-in-1 Adapter User Manual

Model: BCP U KEY BDC2 BDC3 14-in-1 Adapter

Brand: GODIAG

1. Introduction

The GODIAG BCP U KEY BDC2 BDC3 14-in-1 Adapter is a specialized tool designed for encrypted key programming and matching. It provides comprehensive support for various key types, particularly for BMW, Porsche, Audi, Rolls-Royce, and Volkswagen vehicles. This adapter kit is compatible with popular key programming devices such as Xhorse Key Tool Plus, Autel IM608, KEYDIY KD MAX, and KYDZ tablets, offering a versatile solution for automotive locksmiths and technicians.

Overview of the GODIAG BCP U KEY BDC2 BDC3 14-in-1 Adapter kit, showing the main adapter, various key adapters, wiring, and tools.
Figure 1: Complete GODIAG BCP U KEY BDC2 BDC3 14-in-1 Adapter Kit

2. Product Features

  • Supports Xhorse Key Tool Plus device.
  • Supports Autel IM608 device.
  • Supports KEYDIY KD MAX device.
  • Supports KYDZ device.
  • Enables reading and writing of encrypted keys.
  • Facilitates reading and writing of BCP U KEY data using a hole positioning method.
  • Includes a DIY quick connector for broad compatibility (requires user wiring).
  • Features a silicone ribbon cable soldering method for future key/chip compatibility.

3. Setup Guide

Before operation, ensure all components are present and your primary key programming device (e.g., Xhorse Key Tool Plus, Autel IM608) is updated to the latest software version.

3.1 Component Identification

Top view of the GODIAG BDC3 Key AD-X4 adapter, highlighting connection points for Xhorse Key Tool Plus and Key DIY KD-X4.
Figure 2: GODIAG BDC3 Key AD-X4 Adapter (Top View)
GODIAG BDC3 Key AD adapter for Autel IM608, KD-MAX, and KYDZ devices, with wiring harness.
Figure 3: GODIAG BDC3 Key AD Adapter for Autel/KD-MAX/KYDZ

3.2 Initial Connection

  1. Connect the appropriate main adapter (BDC3 Key AD-X4 or BDC3 Key AD) to your key programming device.
  2. For the BDC3 Key AD-X4, use the designated ports for Xhorse Key Tool Plus or Key DIY KD-X4.
  3. For the BDC3 Key AD, connect the wiring harness to your Autel IM608, KD MAX, or KYDZ device as per the device's instructions.
  4. Ensure all connections are secure before proceeding.

3.3 Key Adapter Selection

Select the specific key adapter from the 14 available pieces that matches the key you intend to program. Refer to the 'Specifications' section for a detailed list of supported key types.

Collection of the 14 specialized key adapters included in the GODIAG BCP U KEY kit, each designed for specific key types.
Figure 4: The 14 Specialized Key Adapters

4. Operating Instructions

The GODIAG BCP U KEY adapter simplifies the process of reading and writing key data. Follow these general steps:

4.1 Key Shell Preparation (for BCP U KEY)

  1. Carefully disassemble the key shell to access the internal chip.
  2. Use the provided positioner to accurately locate the exact locking point on the key.
  3. Perform precise drilling at the identified point.
  4. Securely clamp the key into the appropriate BCP U KEY adapter.

4.2 Data Reading and Writing

  1. Connect the prepared key adapter to the main GODIAG adapter, which is connected to your programming device.
  2. On your programming device (e.g., Autel IM608), navigate to the immobilizer or key programming function.
  3. Select the appropriate vehicle make and model, and then choose the option to read or write key data.
  4. Follow the on-screen prompts of your programming device to complete the operation.

4.3 Visual Demonstration

For a visual guide on connecting the adapter, disassembling key shells, and performing key data operations, please refer to the demonstration video below:

Video 1: Demonstration of GODIAG BCP U KEY adapter in use, including key preparation and connection to Autel IM608.

5. Maintenance

  • Keep the adapters and main unit clean and free from dust and debris.
  • Store the kit in a dry environment, away from extreme temperatures and humidity.
  • Avoid dropping or subjecting the components to physical shock.
  • Regularly check cables and connectors for any signs of wear or damage.
  • When not in use, store the adapters in their designated slots or case to prevent loss or damage.

6. Troubleshooting

6.1 Connection Issues

  • Adapter not recognized: Ensure the main adapter is securely connected to your programming device. Check the cables for damage.
  • Key adapter not detected: Verify that the specific key adapter is correctly seated in the main GODIAG adapter.

6.2 Programming Failures

  • Read/Write error: Double-check the key type and ensure you are using the correct key adapter. Verify the key is properly clamped or positioned.
  • Encrypted key issues: Ensure your primary programming device (e.g., Xhorse Key Tool Plus) has the necessary licenses or updates to handle encrypted keys for the specific vehicle model.
  • Device compatibility: Confirm that your programming device is listed as compatible with the GODIAG BCP U KEY adapter.

If issues persist, consult the user manual of your primary key programming device or contact GODIAG technical support.

7. Specifications

7.1 General

  • Brand Name: GODIAG
  • Origin: Mainland China
  • Certification: CE
  • Product Name: BCP U KEY BDC2 BDC3 14-in-1 Adapter

7.2 Package Dimensions & Weight

  • Length: 19 cm
  • Width: 14 cm
  • Height: 5 cm
  • Weight: 0.7 kg

7.3 Supported Key Adapters (14 Pieces)

  1. For BMW BDC2 LCD Key: Supports Reading/Writing of Standard & Encrypted Keys
  2. For BMW BDC3 LCD Key: Supports Reading/Writing of Standard & Encrypted Keys
  3. For BMW BDC2 Key with Rectangular Chip (Knife Style): Supports Reading/Writing of Standard & Encrypted Keys
  4. For BMW BDC3 Key with Rectangular Chip (Knife Style): Supports Reading/Writing of Standard & Encrypted Keys
  5. For BMW U Key U-Chassis Key: Supports Reading/Writing of Standard & Encrypted Keys
  6. For PORS-CHE Key: Supports Reading/Writing of Standard & Encrypted Keys
  7. For AUDI A3-5D Key: Supports Reading/Writing of Standard & Encrypted Keys
  8. For New FOR AUDI 5D Key: Supports Reading/Writing of Standard & Encrypted Keys
  9. For ROLLS-ROYCE Key: Supports Reading/Writing of Encrypted Keys
  10. For V-W B8-5C Key: Supports Reading/Writing of Standard & Encrypted Keys
  11. For V-W Old 5C Intelligence Key: Supports Reading/Writing of Standard & Encrypted Keys
  12. For V-W 5C NEW Ordinary Key: Supports Reading/Writing of Standard & Encrypted Keys
  13. For V-W 5D Key (GOLF8 White Coil): Supports Reading/Writing of Standard & Encrypted Keys
  14. For V-W 5D Key (GOLF8 Black Coil): Supports Reading/Writing of Standard & Encrypted Keys

8. User Tips

  • Always ensure a stable power supply to your main programming device during key operations to prevent data corruption.
  • Before attempting any key programming, back up existing key data if your programming device allows it.
  • For DIY quick connector wiring, double-check all connections against the wiring diagram to avoid damage to the key or adapter.
  • Keep the included small tools (like the positioner and drilling bits) organized to ensure they are available when needed for BCP U KEY operations.

9. Frequently Asked Questions (FAQ)

Q: Is this adapter compatible with all versions of Xhorse Key Tool Plus?
A: The adapter is designed to be compatible with Xhorse Key Tool Plus. Ensure your Key Tool Plus is updated to the latest firmware for optimal performance.
Q: Can I use this adapter for keys not listed in the specifications?
A: The 14 key adapters are designed for specific key types as listed. Using them for unsupported keys may not yield results or could potentially damage the key or adapter. The silicone ribbon cable method offers flexibility for future key types.
Q: What is the 'hole positioning method' for BCP U KEY?
A: This method involves precisely locating a specific point on the key's internal chip, drilling a small hole, and then clamping the key into the adapter to establish a direct connection for reading/writing data. This process is demonstrated in the provided video.

10. Warranty and Support

For warranty information, technical support, or service inquiries regarding your GODIAG BCP U KEY BDC2 BDC3 14-in-1 Adapter, please contact the manufacturer, GODIAG, or your authorized reseller. Keep your purchase receipt as proof of purchase for warranty claims.

© 2023 GODIAG. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.