XIWBSY 2026 Smart Projector User Manual

Important Safety Instructions

Thank you for purchasing the XIWBSY 2026 projector. Please read this manual thoroughly before using and keep it for future reference.

If physical injury, loss of data, or damage is caused by failure to follow instructions, the warranty does not apply.

Set Up

• Do not install the projector in places without proper ventilation.
• Do not install the projector in hot and humid places.
• Do not install the projector in dusty or smokey places.
• Do not block the ventilation holes (intake or exhaust).
• Do not install the projector near temperature and smoke detectors. It may cause a sensor failure.
• Do not install the projector in areas where warm and cool air will blow directly onto the projector, otherwise it may cause projector failure due to moisture condensation or large temperature changes.

Power Supply

• Power off the device before removing the power supply from the socket.
• Use the power cord with caution to avoid unduly bending it. Damaged power cords may cause electric shock or fire.
• Unplug this device if there are lightning storms or when unused for a long period of time.
• Never touch the power cable or the power connection with wet hands.
• Unplug the power cord from the outlet after using the projector.

Caution

• Do not look at the lens or it may cause severe eye injury.
• During and after use, the temperature near the air outlet will rise, therefore, touching it may cause burns.
• Do not place projector in too warm or too cold room, because high or low temperature will shorten the lifespan of the device. The working temperature should be between 5°C-35°C.

Packing List

Please check the box for the following items:

• 1x Projector
• 1x Stand
• 1x Remote Control (Batteries not included)
• 1x Power Cord
• 1x HDMI Cable
• 1x AV Cable
• 1x User Manual
• 1x Packing Box

Product Overview

Familiarize yourself with the projector's components and controls.

Projector Components

1. Focus Lens
2. Adjusting Knob
3. IR receiver (front)
4. 3.5mm port for audio output
5. AV port
6. Speaker
7. IR receiver (rear)
8. Removable dust cover
9. Switch of Removable Dust Cover
10. USB port
11. HDMI 1 port
12. HDMI 2 port
13. Power Switch
14. Focusing ring
15. Adjusting Knob (Lifting nut, on bottom)

Remote Control

Manual Version Remote Control Functions:

1. Power Switch
2. Direction Button
3. Confirm Button
4. Menu Button
5. Volume+
6. Volume-
7. Signal Source
8. Home Button
9. Back Button
10. Mouse
11. Fast forward
12. Previous
13. Mute

Electric Version Remote Control Functions:

1. Power Switch
2. Direction Button
3. Confirm Button
4. Menu Button
5. Volume+
6. Volume-
7. Signal Source
8. Home Button
9. Back Button
10. Mouse
11. Lens Forward
12. Lens Backward
13. Mute

NOTE: For some apps or websites, switch to mouse cursor input action.

Setup

Projector Placement

The projector can be placed in various positions for optimal viewing. Ensure proper ventilation and avoid blocking vents.

Ceiling Installation

1. Purchase a universal projector ceiling mount.
2. Remove the four rubber pads on the bottom of the projector to reveal the screw holes.
3. Use M4*10mm screws for installing the ceiling mount.

Projector Distance & Size

The recommended projection screen is around 80 inches with a projection distance of approximately 8.92 ft. Ambient darkness will improve the clarity of the projected images.

Operating Instructions

Power On

1. Plug the power cord into an outlet.
2. Take off the lens cover.
3. Press the power button on the remote control to turn on the projector.

Adjusting the Projected Image (Autofocus)

After adjusting the size and distance of the projector, if the image is still unclear, press the remote control F+/F- buttons to adjust until a clear image is obtained.

Auto Obstacle Avoidance (Autofocus)

1. Use the "Direction" button on the remote control or projector to navigate to the settings icon, then press the confirm button to enter the settings menu.
2. Select the projection method icon, press "OK" to enter, select "Automatic obstacle avoidance" in the "Projection" column. The projector will automatically avoid obstacles after refocusing (the display screen will shrink).

Auto Access Screen (Autofocus)

1. Use the "Direction" button on the remote control or projector to navigate to the settings icon, then press the confirm button to enter the settings menu.
2. Select the projection method icon, press "OK" to enter, select "Auto access screen" in the "Projection" bar, then select "START". After the projector refocuses, the screen size will be adjusted.

Attention:

When entering the screen automatically, please ensure that all corners of the screen are within the projection screen.

NOTED:

After zoom setting, Auto Trapezoid will be turned off.

Four-Point Keystone Correction (Horizontal and Vertical)

When the projected image is not rectangular, it can be adjusted by four-point keystone correction.

1. Use the remote control or projector buttons to enter the setting interface.
2. Select the projected image settings, press "OK" to enter, select [Auto Trapezoid] in the [Projection] column, and turn off [Auto Trapezoid] to enter the manual adjustment mode.
3. Select [Point Trapezoid] and press "OK" to enter the page. Use the direction buttons on the remote control or projector to adjust the projected image according to the graphics. After adjusting the current point, press the "OK" button to go to the next corner point.
4. After adjusting all four points, press the return key to save the current state.

Input Source

A. HDMI Mode

1. Connect the projector and equipment with an HDMI cable.
2. Press and hold the <Source button> on the projector or remote control to enter the input source interface and select HDMI.
3. Select the HDMI cable to connect to the corresponding interface (HDMI1 or HDMI2), press the "OK" key to enter the interface, and press the return key to exit and return to the main interface of the projector.

B. AV Mode

1. Connect the projector and the equipment with an AV cable.
2. Press and hold the source button of the projector or remote control to enter the input source interface.
3. Select AV, press "OK" to enter, press Return to exit and return to the main interface of the projector.

C. USB Mode

1. Connect the projector to a U disk. The U disk on the main interface of the projection screen will display the highlighted state.
2. Select the corresponding Movie, Music, Picture, and Office Suite modules of the file type, and press "OK" to enter the file.

WiFi Settings

1. Use the remote control or the projector button to enter the setting interface.
2. Find <NETWORK> in the setting interface, press the "OK" button to enter the WiFi setting. Press the "OK" button to turn on WiFi, and the WiFi name list will appear.
3. Select the name of the WiFi to be connected, press the "OK" key to display the virtual keyboard. Use the remote control to enter the password, place the control cursor on the keyboard [Finish], and press the "OK" key to complete the password input.

Screen Mirroring

The projector supports screen mirroring from various devices.

For iOS Devices (Streaming using WiFi)

Note:

It only enables screen mirroring over WiFi, not iOS device data.

1. Connect the projector to WiFi according to the projector WiFi setting steps, and turn on WiFi on your iPhone. Ensure your iPhone and projector are connected under the same WiFi network.
2. On the projector's main menu, use the remote control to select the settings icon and then select the WiFi option.
3. Select the WiFi to be connected, press the "OK" key to display the virtual keyboard. Use the remote control to enter the password, place the control cursor on the keyboard [Finish], and press the "OK" key to complete the password input (connecting a mouse to enter the WiFi password is more convenient).
4. After entering the password, use the directional buttons on the remote control to move the cursor to [Connect], then press "OK" to connect.
5. On the iOS device page, slide up to enter the options interface, click the Screen Mirroring icon, select the projector name Eshare-xxxx, and click Connect.

For Android Devices (Streaming with WiFi)

1. Connect the projector to WiFi according to the projector WiFi setting steps. Open the main menu of the projector, select the Eshare icon, and press the "OK" button to enter.
2. Follow the interface prompts to scan the Eshare QR code with your mobile device. Download the (Eshare) APP to your mobile device. Open (Eshare) after the download is complete, and use the mobile device mirroring function with one-click screen sharing.
3. After successful connection, the screen content of the Android device will be projected onto the projection surface.

Note:

The mobile device and the projector should be connected to the same WiFi network.

For MacBook Devices

1. Connect the projector to WiFi according to the projector WiFi setting steps, and open the computer network settings. Please make sure the MacBook and the projector are connected under the same WiFi.
2. Open the settings, find the Airplay option, click and search for the projector.
3. Select the current projector device: EShare-xxxx, click and connect.
4. When the projector and the device content are consistent, screen mirroring is successful.

For Windows PC (Wireless Miracast support Windows 7, 8, 10)

1. Connect the projector to WiFi according to the projector WiFi setting steps. The WiFi needs to be the same as the computer WiFi.
2. Enter the URL http://h.eshare.app on the computer, and select the (Eshare for Windows) option to download.
3. After the download is complete, open the EShare APP, select one-click screen sharing, and the screen mirroring is successful.

Bluetooth Mode

NOTE:

The projector can be connected to external speakers via Bluetooth. It can also connect to a smartphone or tablet for music streaming via Bluetooth. In Bluetooth mode, the projector can be used as a Bluetooth speaker.

How to connect the projector to external speakers:

1. Use the remote control or the projector button to enter the setting interface of the projector.
2. Find the Bluetooth settings on the setting interface, press "OK" to enter the Bluetooth settings, select Add accessory. A list of Bluetooth devices will be displayed.
3. Select the Bluetooth speaker from the device list to connect, then press "OK" to pair.
4. After successful connection, it will show connected on the Bluetooth device.

How to connect the projector to the phone via Bluetooth:

1. Use the remote control or the projector button to move the cursor to APPS on the main interface of the projector.
2. Use the remote control or the projector button to move the cursor down to the Bluetooth icon under My apps, and press "OK" to enter the Bluetooth connection interface.
3. Turn on the Bluetooth of the mobile phone, find the Bluetooth name of the projector (Projector), and click the pairing connection.

How to Download Apps

1. Find the APPS icon on the projector's main menu page. Use the remote control direction keys to move the cursor to the APP Store icon, and press the "OK" key to enter.
2. Click the search icon to find the APP you need to download.

Maintenance

Cleaning the Projector

The projector features a filter to prevent dust and particles from entering the lens. It is important to clean this filter regularly to maintain optimal image quality.

• Regularly clean the filter to prevent dust and particles from entering the lens.
• The front of the projector also has an anti-dust cover. You can easily clean it with any soft cloth, preferably a special type of cloth designed for lens cleaning.

General Care

• Avoid exposing the projector to extreme temperatures.
• Ensure proper ventilation during operation.
• Handle the power cord with care to prevent damage.

Troubleshooting

Q1. Blurry Image

• Make sure the projection distance is farther than the minimum projection distance of 1.3 m.
• Adjust the focus ring.

Q2. The projector image shows no signal

• Please make sure all cables are connected to the projector properly and stably.
• Check whether the projector input source mode has been selected as the corresponding format.
• For example: if the device and the projector are connected with an HDMI cable, the HDMI input channel must be selected for projection, and no signal will be displayed if other channels are selected.

Q3. Remote Unresponsive

• Make sure the remote points directly at the IR receiver.
• Do not cover the IR receiver.
• Try a new pair of AAA batteries.

Q4. The projector stops automatically after a period of time

• Check if the projector's air inlet and outlet are blocked by other objects.
• Please pay attention to whether the local mains voltage is too low or too high or fluctuates too much.

Specifications

Warranty and Support

Warranty Information

This product comes with a 1-year warranty. Free returns and refunds are available, except for damage caused by human error.

Please note that the warranty does not cover physical injury, loss of data, or damage caused by failure to follow the instructions in this manual.

Repairs

• Never attempt to repair the projector yourself.
• No components in the projector can be repaired by customers.
• Please entrust qualified professional maintenance personnel for any repair work.

Additional Resources

A detailed user manual in PDF format is available for viewing. You can access it via the provided link: User manual (PDF)

User Tips

• Automatic Adjustments: The projector's Laser TOF autofocus automatically adjusts clarity and corrects the image within a second. It also auto-adjusts brightness on uneven surfaces, ensuring a clear picture in different lighting conditions.
• Flexible Placement: Utilize the 360° rotatable design for seamless projection from any angle, whether on a wall, ceiling, or other surfaces. No manual adjustment is required for focus after moving the device.
• App Access: With Android 12.0 and a built-in Google Play Store, you can directly access and stream from popular apps like Netflix, YouTube, and Disney+.
• Connectivity: Take advantage of the dual wireless connectivity (Bluetooth 5.3 and WiFi 6) for faster transmission speeds and immersive sound with the built-in HiFi speakers.

Product Demonstration Video

This video demonstrates the projector's autofocus, 360-degree rotation, and included accessories. It also shows a comparison of the projection quality on a rough wall without a screen.