Rapoo VT3 V2

Contents

Rapoo VT3 V2 Wireless Gaming Mouse User Manual

Model: VT3 V2 Series

1. Product Overview

The Rapoo VT3 V2 is a high-performance wireless gaming mouse designed for competitive e-sports. It features a lightweight design, advanced sensors, and multiple connectivity options to deliver a responsive and precise gaming experience.

Rapoo VT3 V2 Wireless Gaming Mouse with key features highlighted
Rapoo VT3 V2 Wireless Gaming Mouse: Next-Gen VT3V2 Wireless Gaming Mouse with PAW3950/3955 sensor, Nordic54L chip, and Dragonbone Frame. Offers up to 750 hours battery life at 1kHz polling rate.

2. Package Contents

  • Rapoo VT3 V2 Wireless Gaming Mouse
  • Nano Mini 8K Receiver
  • USB-C Charging Cable (1.8m)
  • USB Adapter
  • Anti-slip Stickers
  • User Manual (this document)
Complete accessories for Rapoo VT3 V2 mouse
Complete accessories for high-speed competition, including USB-C cable, USB adapter, and anti-slip stickers.

3. Setup Guide

3.1 Initial Charging

Before first use, it is recommended to fully charge the mouse. Connect the provided USB-C cable to the mouse and to a computer USB port or a low-power USB charger (voltage not exceeding 5V). Avoid using high-power devices for charging.

Charging instructions and multi-charging ecosystem
Charging products are designed based on USB protocol. It is recommended to charge the device via computer USB port or use a device with voltage not exceeding 5V. Do not use high-power devices for charging. Supports Wired Charging, Wireless charging, and Contact Charger.

3.2 Connecting the Mouse

The Rapoo VT3 V2 mouse supports both wired and 2.4G wireless connections.

3.2.1 Wireless Connection (2.4G Receiver)

  1. Insert the Nano Mini 8K Receiver into an available USB port on your computer.
  2. Turn on the mouse using the power switch located on the bottom of the mouse.
  3. The mouse should automatically connect to the receiver. If not, press the pairing button (if available) or refer to the software for pairing instructions.

3.2.2 Wired Connection

Connect the provided USB-C cable directly from the mouse to a USB port on your computer. The mouse will function in wired mode and charge simultaneously.

3.3 Driver Installation

For full functionality and customization, download and install the Peripheral Full Set Driver AHub software from the official Rapoo website. This software is compatible with Windows and macOS systems and allows for profile switching and advanced settings.

Peripheral Full Set Driver AHub software interface
Peripheral Full Set Driver AHub: Web & Local Dual End, Full-stack self-developed, Windows/macOS Dual Platform. Profile switches automatically with the app. Onboard Storage & Cloud Storage. Note: Web driver and macOS versions may not support automatic profile switching.

4. Operating Instructions

4.1 Button Functions

The Rapoo VT3 V2 mouse features 7 independent buttons and 1 scroll wheel, with a total of 10 multi-function keys. These are compatible with Windows and macOS systems.

Diagram of Rapoo VT3 V2 mouse buttons and their functions
Diagram illustrating the 10 multi-function keys: Left-click, Right-click, Wheel Press (Middle button), Wheel Forward Rotation, Wheel Backward Rotation, DPI+ (DPI Up), DPI- (DPI Down), Forward Side Button, Backward Side Button. Includes an Anti-misclick DIY standalone key for custom settings.

4.2 DPI Adjustment

The mouse features adjustable DPI sensitivity. Use the DPI+ and DPI- buttons to cycle through different DPI levels. The Nano Mini 8K Receiver has a DPI Switch Indicator that shows the current DPI level:

  • Level 1: Red
  • Level 2: Orange
  • Level 3: Yellow
  • Level 4: Green
  • Level 5: Cyan
  • Level 6: Blue
  • Level 7: Purple

For precise DPI settings, use the driver software.

4.3 Polling Rate Adjustment

The mouse supports 7-speed wired/wireless polling rate adjustments for microsecond response times. Available polling rates include:

  • 125Hz (8ms response)
  • 250Hz (4ms response)
  • 500Hz (2ms response)
  • 1000Hz (1ms response)
  • 2000Hz (0.5ms response)
  • 4000Hz (0.25ms response)
  • 8000Hz (0.125ms response)

Adjust the polling rate via the driver software to suit your preferences and game environment.

Polling rate options for Rapoo VT3 V2 mouse
7-speed Wired/Wireless Polling Rate Adjustable, Microsecond Response, showing 8000Hz, 4000Hz, 2000Hz, 1000Hz, 500Hz, 250Hz, and 125Hz options.

4.4 Performance Modes

The mouse can adapt to mainstream game environments with 6 performance modes, which can automatically switch with applications. These modes include:

  • Rage Racing Mode: Full segment fast static scan frame rate (>=20000FPS)
  • Competitive Super Core Mode: Full segment static scan frame rate (>=13000FPS)
  • High Performance Mode: E-sports game, stable enough for use
  • Balanced Mode (Low Power): Gaming entertainment, moderate performance
  • Office Mode: Easy office work, longest battery life
  • Hypercore Mode (Corded Gaming): Dynamic competitive firmware, microsecond response
Performance modes and polling rates for Rapoo VT3 V2 mouse
"8828" Rapid & Responsive E-sports Standard, showing Native Wireless/Wired 8KHz Report Rate, >=20000FPS Engine Scan Frame Rate, 8KHz Key Scan Rate, and 6 performance modes.

5. Maintenance

5.1 Cleaning

To clean the mouse, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the mouse. Avoid harsh chemicals or abrasive materials.

5.2 Battery Care

The mouse features an 800mAh lithium battery. To maximize battery lifespan:

  • Avoid fully discharging the battery frequently.
  • Charge the mouse when the battery indicator shows low power (red light flashing).
  • Do not expose the mouse to extreme temperatures.

The Nano Mini 8K Receiver includes a battery level indicator:

  • 100%-70%: Steady Green Light
  • 69%-50%: Steady Yellow-Green Light
  • 49%-30%: Steady Yellow Light
  • 29%-10%: Steady Orange Light
  • <10%: Red Light Flashing (Low battery)
Nano Mini 8K Receiver with battery level and DPI indicators
Nano Mini 8K Receiver with V+2.0 Technology, Anti-Interference & Stable. Shows Battery Level Indicator (Green, Yellow-Green, Yellow, Orange, Red Flashing) and DPI Switch Indicator (Red, Orange, Yellow, Green, Cyan, Blue, Purple).

6. Troubleshooting

6.1 Connectivity Issues

  • Mouse not responding: Ensure the mouse is turned on and fully charged. Check if the Nano Mini 8K Receiver is securely plugged into a USB port.
  • Intermittent connection: Try plugging the receiver into a different USB port. Ensure there are no strong wireless interference sources nearby.
  • Driver not recognizing mouse: Reinstall the Peripheral Full Set Driver AHub software. Ensure your operating system is up to date.

6.2 Performance Issues

  • Lag or stuttering: Adjust the polling rate to a lower setting if experiencing issues, especially in wireless mode. Ensure the mouse sensor is clean.
  • Inaccurate tracking: Clean the mouse sensor. Ensure you are using a suitable mouse pad. Calibrate the sensor using the driver software if available.

7. Specifications

FeatureRapoo VT3 V2Rapoo VT3 Pro V2Rapoo VT3 Max V2
Connection MethodWired connection / 2.4G receiver connection
Number of Keys7 independent buttons + 1 scroll wheel (10 multi-function buttons)
Charging PortUSB-C
Wire Length1.8m
Receiver Dimensions19x13x5mm (with storage compartment)
Receiver WeightApprox. 1.6g
Master Control ChipNORDIC 54L15NORDIC 54L15NORDIC 54LM20
SensorPixArt 3950 UltimatePixArt 3955 UltimatePixArt 3955 Ultimate
DPI Sensitivity10-45000 DPI (steps of 10)1-60000 DPI (steps of 1)
Tracking Speed750 IPS
Acceleration50G60G
Key Scan Rate1000Hz1000/2000/4000/8000Hz
LOD (Lift-off Distance)0.7-1.7mm (11-speed adjustable)
Micro SwitchesOmron mechanical (0.1 billion clicks)Razer custom ultra-light (120 million clicks)
EncoderTTC Mechanical Encoder (2 million times)Rapoo Custom Special Light Encoder (2 million times)
Battery Life (1000Hz)Approx. 750 hours
Quick RechargeN/A1-minute charge for 6.5 hours use
Comparison table of Rapoo VT3 V2, VT3 Pro V2, and VT3 Max V2 models
Detailed comparison of VT3 V2, VT3 Pro V2, and VT3 Max V2 models, highlighting differences in sensor, chip, key scan rate, and micro switches.
Product parameters including dimensions and weight
Product Parameters: Connection Method, Number of keys, Multi-function buttons, Charging Port, Wire length, Receiver Dimensions, Receiver weight.

8. User Tips

  • Customize for Optimal Performance: Utilize the dedicated driver software to fine-tune DPI settings, polling rates, button assignments, and create custom profiles for different games or applications.
  • Ergonomics: The mouse features asymmetric ergonomics and a design optimized for claw & grip mix, high back arc, and optimal finger grip angle. Experiment with your grip to find the most comfortable and effective style for long gaming sessions.
  • Battery Management: Keep an eye on the battery indicator on the Nano Mini 8K Receiver. For competitive play, consider using wired mode or ensuring the mouse is fully charged to avoid interruptions.
  • Surface Matters: For the best tracking performance, use the mouse on a high-quality gaming mouse pad. The mouse is compatible with 'Ice Feel' gaming mouse pads with 99.95% Teflon content for smooth sliding.
  • Firmware Updates: Regularly check the official Rapoo website for firmware updates for your mouse and receiver to ensure you have the latest performance enhancements and bug fixes.

9. Warranty and Support

For warranty information, technical support, and service inquiries, please refer to the official Rapoo website or contact their customer service directly. Keep your proof of purchase for warranty claims.

© 2023 Rapoo. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.