URLIFE E20 Pro

Contents

URLIFE E20 Pro Electric Bike User Manual

Model: E20 Pro

1. Introduction

Thank you for choosing the URLIFE E20 Pro Electric Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your e-bike. Please read this manual thoroughly before your first ride to ensure optimal performance and safety. Keep this manual for future reference.

Important Safety Notice: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

2. Product Overview

Familiarize yourself with the main components of your URLIFE E20 Pro E-Bike:

Diagram of URLIFE E20 Pro E-Bike components
Figure 2.1: E-Bike Component Diagram
  • Handlebar: Steering and control interface.
  • Front Light: Illuminates the path for night riding.
  • Fork: Front suspension component.
  • Disc Brake: Provides stopping power for front and rear wheels.
  • Tire (Tyre): 20x4.0 inch off-road fat tires.
  • Frame: Main structure of the bicycle, made of Carbon Steel.
  • Battery: Removable 48V 15.6AH Lithium battery.
  • Saddle: Ergonomic cushion seat.
  • Rack: Rear cargo rack.
  • Rear Light: Enhances visibility from the rear.
  • Motor: 1500W Peak Brushless Motor.
  • Chain: Connects pedals to the rear wheel.
  • Pedal: Foot-operated propulsion.

3. Specifications

Feature Specification
Model Number E20 Pro
Brand Name URLIFE
E-bike Weight 86 LBS (39 KG)
Overall Dimensions (L x H x W) 68" (173 cm) x 47" (119 cm) x 42" (107 cm)
Wheel Diameter 20 inches
Tire Type 20" x 4.0" Off-Road Fat Tires
Max Range per Power 90-110 KM (56-68 miles)
Motor Power Rated 250W, Peak 1500W Brushless Motor
Motor Torque 80 N.M
Max Speed Up to 28 MPH (45 km/h) (Note: Local regulations may limit speed to 15 km/h or less)
Max Slope 30°
Brake Type Dual Hydraulic Disc Brakes (Front & Rear)
Gearing 7-Speed Gear System
Max Load Capacity 265 LBS (120 KG)
Battery Capacity 48V 15.6AH Lithium battery
Power Supply Lithium battery
Charger Input AC 100-240V
Charger Output DC54.6
Charging Time 3-6 Hours
Operating Temperature -10°C to 45°C (14°F to 113°F)
Waterproof Rating IP54 (Resists splashes and light rain)
Suggested Rider Height 5'3" - 6'5" (160 cm - 196 cm)
Folded No
Certification CE
E-bike size and load capacity diagram
Figure 3.1: E-Bike Size and Load Capacity

4. Setup and Initial Checks

4.1 Unpacking and Assembly

Your E20 Pro E-Bike arrives partially assembled. The assembly process is generally straightforward.

Video 4.1: Product Feature Overview and Assembly Steps (shows unpacking, handlebar, fender, wheels, seat, pedal, reflector, gas pedal, test)

Included tools for assembly:

  • Pedal
  • Charger
  • Instruction/Warranty card
  • Hex Wrench
  • External HexWrench

Some details of your bike may be slightly different from the pictures due to product upgrades, which will not affect usage.

4.2 Pre-Ride Checks

Before each ride, perform the following safety checks:

  • Tire Pressure: Check tire pressure before riding; the recommended pressure is 35-45 PSI.
  • Brakes: Ensure the front and rear brakes are working properly.
  • Handlebars and Wheels: Verify that the handlebars and wheels are securely fastened.
  • Reflectors: Confirm that all reflectors are undamaged and clean.
  • Electrical System: Check the circuit, lighting, and other electrical systems for proper function.

5. Operating Your E-Bike

5.1 Powering On/Off and LCD Display

Your E20 Pro is equipped with an HD Color LCD Display for real-time information.

LCD Color Display showing speed, gear, PAS, trip, ODO, VOL, WATT, Mile/km
Figure 5.1: LCD Color Display Interface

The display shows:

  • Speed (MPH/KMH)
  • Battery Level
  • PAS (Pedal Assist System) Level
  • Current Gear
  • Trip Time
  • Odometer
  • Voltage (VOL)
  • Wattage (WATT)
  • Boost/Brake Status

Refer to the detailed instructions in the PDF user manual for specific button functions and display settings.

5.2 Riding Modes

The E20 Pro offers three distinct riding modes to suit your preference and terrain:

Diagram showing Sport, Assist, and Comfort riding modes
Figure 5.2: Three Riding Modes
  • Sport Mode: Provides maximum power assistance for challenging terrains or higher speeds.
  • Assist Mode: Offers balanced power assistance, ideal for general riding and extending battery life.
  • Comfort Mode: Minimal power assistance, suitable for relaxed cruising or when you prefer more manual pedaling.

The 7-speed gear system allows you to find your perfect cadence for every ride, complementing the electric assist.

Close-up of the 7-speed gearing system
Figure 5.3: Precise 7-Speed Gearing

5.3 All-Terrain Capability

Equipped with 20" x 4.0" off-road fat tires and a front suspension system, the E20 Pro is designed for various environments.

20x4.0 off-road wheels suitable for City Road, Soil, Sand, Snow
Figure 5.4: All-Terrain Wheels
  • City Roads: Smooth and efficient commuting.
  • Soil/Dirt Trails: Enhanced grip and stability for off-road adventures.
  • Sand: Wide tires provide flotation on soft surfaces.
  • Snow: Improved traction in snowy conditions.
Person riding E-bike on various terrains: Streets, Mountains, Snow, Soil
Figure 5.5: E-Bike on Diverse Terrains

6. Maintenance

6.1 Battery Care and Charging

Proper battery care is crucial for longevity and safety:

  • Storage Temperature: Charge within 0°C to 45°C; discharge within -20°C to 60°C.
  • Environment: Keep the battery dry. Do not expose to acidic/alkaline liquids, rain, fire, heat sources, or high temperatures.
  • Integrity: Do not reverse battery polarity, disassemble the battery, or cause a short circuit.
  • Charger Use: Use only the original charger. Do not charge for more than 12 hours. The charging current should not exceed 2 amps.
  • Long-Term Storage: If not used for an extended period, store in a cool, dry place and recharge twice a month.
Diagram showing removable battery and charging process
Figure 6.1: Removable Battery and Charging

Charging Guide:

  • Always follow charging instructions to avoid consequences.
  • Unplug the power cord when not in use.
  • Ensure the charger is compatible with the battery type and voltage. Do not mix chargers.
  • Charge in a well-ventilated area; avoid charging in enclosed spaces or under direct sunlight.
  • When charging, connect the battery first, then plug in the power source. After charging, disconnect the power source first, then remove the battery.
  • Stop charging when the green light turns on. Do not leave the charger connected to the power source when not charging.
  • If the indicator light shows abnormalities, there is a strange odor, or the charger overheats, stop charging immediately and inspect or replace the charger.
  • Do not disassemble used batteries; they are hazardous and should be recycled by professional departments.
  • Avoid foreign objects, especially water or other liquids, entering the charger to prevent short circuits.
  • Never carry the charger with the bicycle unless it is properly cushioned and placed in a tool case. Do not disassemble internal components of the charger or replace any parts.

6.2 General Maintenance

  • Regularly check and tighten all bolts and fasteners.
  • Keep the chain clean and lubricated.
  • Inspect brake pads for wear and replace as needed.
  • Clean the bike regularly with a damp cloth; avoid high-pressure washing directly on electrical components.

7. Safety Measures

Your safety is paramount. Adhere to the following guidelines:

  • Traffic Laws: Always yield to pedestrians and obey all local traffic regulations. Riding on sidewalks may be illegal; check local laws.
  • Protective Gear: Always wear a helmet and appropriate protective equipment.
  • Rider Experience: Do not lend the bicycle to anyone unable to operate it safely to avoid injuries.
  • Riding Environment: Do not ride on motor vehicle lanes or crowded sidewalks.
  • Load Limits: Do not carry passengers or items beyond the legal maximum load capacity (265 LBS / 120 KG).
  • Parking: Do not park at building entrances, stairwells, pathways, or emergency exits.
  • Charging Location: Do not charge or park the bicycle in residential buildings. When charging, keep the bicycle away from flammable materials and do not charge for extended periods.
  • Speed Limits: Ride at a speed not exceeding 15 km/h on non-motorized lanes, downhill, or uneven roads. If there is no non-motorized lane, ride on the right side.
  • Awareness: Carefully adjust distance or slope to avoid crossing the safety line of other vehicles or passengers.

8. Troubleshooting

This section addresses common issues you might encounter with your E20 Pro E-Bike.

Problem Possible Cause Solution
Bike does not power on Battery not charged or not properly seated; power cable loose. Ensure battery is fully charged and securely inserted. Check all cable connections.
Motor not assisting PAS level too low or off; brake levers engaged; motor connection loose. Increase PAS level on the display. Release brake levers. Check motor cable connections.
Short battery range Low tire pressure; riding in high assist modes; cold weather; heavy load. Ensure tires are inflated to 35-45 PSI. Use lower assist modes. Battery performance can decrease in cold weather. Reduce load if possible.
Brakes feel weak Worn brake pads; loose brake cables; air in hydraulic system. Inspect and replace brake pads if worn. Adjust brake cable tension. If hydraulic, bleeding may be required by a professional.
Display not working Loose display cable; display damaged. Check display cable connection. If still not working, contact customer support.

For more complex issues, please refer to the comprehensive PDF user manual or contact customer support.

View Full User Manual (PDF)

9. User Tips

  • Assembly: Many users find the assembly process straightforward. Ensure all components are securely fastened before your first ride.
  • Tire Pressure: Low-pressure tires are excellent for off-road use, providing better grip and shock absorption. Adjust pressure based on terrain and comfort.
  • Riding Modes: The assist modes function as speed limiters (e.g., 15-20-25 km/h). Be aware of local regulations regarding the use of pedal assist and throttle (if applicable).
  • Responsible Use: While powerful, avoid treating the e-bike like a motorcycle to prevent premature wear or damage. Use it within its intended design parameters.
  • Battery Range: The battery typically lasts for 90-110 km. Factors like terrain, rider weight, assist level, and weather can affect the actual range.

10. Warranty and Support

10.1 Comprehensive Warranty

Your URLIFE E20 Pro E-Bike comes with a 1+1+1 Year Comprehensive Warranty:

  • 1 Year for the Frame
  • 1 Year for the Battery
  • 1 Year for the Motor

This warranty covers manufacturing defects such as frame cracks, battery capacity loss beyond normal degradation, and motor bearing issues.

Exclusions: The warranty does not cover artificial damage, improper use, unauthorized modifications, or accidental crashes.

10.2 Customer Support

For any product issues or warranty claims, please contact our professional UK customer service team. They are available to provide timely support and assistance.

© 2024 URLIFE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.