1. Introduction
Thank you for your purchase of a NEEWER Z3R-S TTL speedlite flash. This flash is designed for Sony, Canon, and Nikon cameras, offering automatic TTL flash exposure for various lighting conditions. Its advanced features aim to enhance your shooting experience.
Key Features:
- Powerful Output: Maximum flash power of 100Ws with 81 levels of dimming (1/1~1/256).
- High-Performance Battery: Removable Li-ion battery provides 500 full-power flashes and a 1.7s recycling time.
- Durable Flash Tube: Upgraded quartz tube supports up to 100,000 flashes.
- Wireless System: Supports TTL auto flash as a master or slave unit in a 2.4GHz wireless multi-lamp flash system.
- Intuitive Control: Full-color touchscreen for easy operation.
- Advanced Sync: Supports manual frequency flash mode, HSS (High-Speed Sync), and second-curtain sync.
- Modeling Lights: Built-in upper and lower modeling lamps with independent lighting adjustment.
2. Safety Precautions
- Always keep this product dry.
- Keep this product out of reach of children.
- Do not disassemble or modify the product.
- Do not subject to any form of physical shock. The product should not be exposed to fire or an environment where the temperature exceeds 50 degrees Celsius.
- Do not fire the flash directly into the eyes, as this could result in visual impairment.
- Do not use the product near chemicals, flammable gases, or other volatile substances which may cause fire or electromagnetic interference.
- Do not use in the rain or in damp conditions.
- Turn off the product immediately if it appears to be operating abnormally, and try to troubleshoot the likely cause.
- Failure to comply with these recommendations and warnings will invalidate the warranty.
3. Package Contents
The NEEWER Z3R-S package includes the following items:

Image: NEEWER Z3R-S Package Contents
- Flash unit ×1
- Lithium Battery ×1
- Mini Stand ×1
- USB Power Cord ×1
- Protective Case ×1
- User Manual ×1
- Diffuser ×1
4. Name of Components
4.1. Flash Body

Image: Flash Body Components
- Power switch (Long press for 2s)
- Modeling lamp switch (Short press)
- Sync jack
- Li-ion battery
- USB-C upgrading port (for firmware upgrades only, not charging)
- Battery lock
- Hot shoe
- Flash head
- Modeling lamp
- Wireless sensor
- Focus assistant lamp
- (CP-E4) External power input
4.2. Control Panel
- TCM switch
- Test flash button/recycling indicator
- Main UI return button (Short press)
- Hot shoe lock
- Display
5. Setup
5.1. Battery Installation and Removal
- Removing the battery: Slide the button in the direction shown on the battery compartment to remove the battery.
- Inserting the battery: Insert the lithium battery into the battery compartment in the direction indicated by the battery until the fastener snaps into place.
5.2. Mounting and Unmounting the Flash
- Mounting: Turn the locking ring to the left, fully insert the camera's hot shoe, then rotate the locking ring to the right until secure.
- Unmounting: Press the button and rotate the hot shoe locking ring to the left to loosen.
5.3. Power Management
- Use the ON/OFF Power Switch to power the flash unit on or off.
- If the flash is set as a transmitter (TX), it will automatically power off after approximately 90 seconds of inactivity. Pressing the camera shutter halfway or any flash button will wake it up.
- If set as a receiver (RX), it will enter sleep mode after a certain period (adjustable, 60 minutes by default). Pressing any flash button will reactivate it.
- Note: When used off-camera, it is recommended to disable 'automatic power off' in custom functions.
5.4. External Power Input
The Z3R features an external power port for the DC330V battery pack (not included) to reduce recycle time and provide reliable performance for high-intensity, continuous shooting.

Image: Flexible Flash Head, Battery Features, and External Power Box
6. Operating Instructions
6.1. Display Overview
The 2.8" full-color sensitive touchscreen provides an intuitive interface for controlling the flash. It responds quickly to touch and offers multiple language options.

Image: 2.8" Full Color Sensitive Touchscreen
6.2. Flash Modes

Image: 3 Flash Control Modes
6.2.1. TTL Autoflash Mode
In TTL mode, the flash automatically adjusts its output based on the camera's metering system to achieve even exposure.
- Tap <TTL> at the bottom of the screen to enable TTL flash mode.
- Press the camera release button halfway to focus. A pre-flash is fired, and the flash receives camera information for the main flash.
Flash Exposure Compensation (FEC)
Adjusts flash exposure in 1/3-stop increments between ±3 stops. Drag the circle or tap <+>/<-> to adjust. Set to "0.0" to cancel.
High-Speed Sync (HSS)
Enables the flash to synchronize with all camera shutter speeds, useful for fill-flash portraits. Swipe up from the bottom of the screen and tap the sync icon to display <H>.
Second-Curtain Sync
Creates a trail of light following the subject by firing the flash just before the shutter closes. Select REAR flash mode on your Sony camera.
6.2.2. M: Manual Flash Mode
The flash output is adjustable from 1/1 to 1/256th power in 1/10th stop increments.
- Tap <M> at the bottom of the screen.
- Drag the circle or tap <+>/<-> to adjust flash output power.
S1/S2 Optical Control Unit Setting
In M manual flash mode, S1/S2 functions allow the flash to act as an optical secondary flash. S1 fires synchronously with the main flash. S2 ignores the pre-flash and fires in response to the second flash from the main unit. (Note: S1 and S2 optical triggering is only available in M manual flash mode).
6.2.3. MULTI: Stroboscopic Flash Mode
Fires a rapid series of flashes to capture multiple images of a moving subject. You can set the firing frequency (Hz), number of flashes, and flash output.
- Tap <MULTI> at the bottom of the screen.
- Set the flash frequency and number of flashes by scrolling the numbers below <Times> and <Hz>.
- Drag the circle or tap <+>/<-> to adjust flash output power.
Calculating Shutter Speed: Number of Flashes / Flash Frequency = Shutter Speed. For example, 10 flashes / 5 Hz = 2 seconds.
Caution: To prevent overheating, do not use stroboscopic flash more than 10 times in succession. Allow 15 minutes rest after 10 consecutive uses.
7. Wireless Flash Shooting (2.4G Transmission)
The Z3R-S can operate as a master (TX) or slave (RX) unit in a 2.4G wireless system.

Image: Wireless Q and X System Compatibility
7.1. Wireless Setup
- Master Unit (TX) Settings: Select Wireless (WL) flash mode on the camera. The Z3R-S mounted on camera acts as the TX unit.
- Receiver Unit (RX) Settings: Swipe down from the top of the screen and select <RX>. The <RX> icon will appear, indicating the flash is in RX Mode.
- Communication Channel: To prevent signal interference, change the communication channel. Go to the <RF Wireless> menu, tap <Scan Free Channels> to find available channels, or manually scroll to select a channel (1-32). Ensure TX and RX units match.
- Wireless ID Settings: Set the master and slave units to the same wireless ID (1-99) or OFF to disable.
- Wireless Sync: In the <RF Wireless> menu, tap <Wireless Sync> to quickly set the same channel and ID on both units.
7.2. Auto Flash Shooting with Multiple RX Units
You can use multiple RX units for increased flash output. Any flash group (A/B/C/D/E) can be set. The TX flash ensures all flashes fire at the same output for standard exposure.
7.3. Compatibility with Godox 2.4G X System
The Z3R-S can operate as a slave unit compatible with Godox Xpro, X3, and X2 transmitters (RX COMPAT) and Sekonic L-858D light meters (RT-GX). This requires enabling <Slave Compatibility> in the custom menu and a firmware update. Note: Q and X systems cannot be used simultaneously.
8. Other Applications
8.1. Sync Triggering
Insert a trigger plug into the 2.5mm Sync Cord Jack, and the flash will fire in sync with the camera shutter.8.2. Auto Focus Assist Beam
In low-light conditions, the built-in autofocus assist lamp turns on to aid focusing. To turn it off, tap the <AF> icon on the screen.
8.3. TCM - One Key Switching TTL/M Mode
Toggle the TCM button to 'M' to quickly switch between TTL auto mode (for metering) and manual mode (for precise adjustments).
8.4. Bounce Flash
Point the flash head towards a wall or ceiling to bounce the light, softening shadows for a more natural look. The flash head can rotate 0-330° horizontally and tilt -7-120°.
8.5. ZOOM: Set the Flash Coverage
The flash coverage can be set automatically or manually (28mm to 105mm). In auto zoom, it matches the lens focal length. For manual zoom, swipe up from the bottom of the screen and adjust the bar.
8.6. Modeling Lamp
The modeling lamps have 10 adjustable brightness levels. Swipe up from the bottom of the screen and tap the modeling lamp bar to switch between upper and lower lamps, then slide the bar to adjust brightness.
8.7. Modeling Flash
If your camera has a depth-of-field preview button, pressing it activates a 1-second continuous flash (modeling flash) to preview lighting effects. Avoid triggering more than 10 consecutive modeling flashes to prevent overheating.
9. Custom Functions (C.Fn)
The flash allows customization of various settings. Access the menu by swiping down from the top of the screen and tapping the gear icon. Tap any item to access its settings.
| Symbol | Function | Parameters | Description |
|---|---|---|---|
| ((·)) | RF Wireless | Scan Free Channels | Start scanning for free channels |
| CH | Channel (1-32) | ||
| ID | Wireless ID (OFF, 1-99) | ||
| RX Compatibility | Turn RX Compatibility On or Off | ||
| Modeling Light | CONT | Modeling light stays on during flash | |
| INTER | Modeling light turns off during flash | ||
| Sound Prompt | Beep on/off | Beep on/off | |
| Increment | 0.1 | For precise adjustment | |
| 0.3 | For efficient adjustment | ||
| Flash Triggering Distance | 0-10m | Flash triggering distance: 0-10m | |
| 1-100m | Flash triggering distance: 0-100m | ||
| Screen Settings | Display brightness | Display brightness | |
| TX/WLOFF Standby | TX/On-Camera Mode standby time (60s, 90s, 120s, OFF) | ||
| RX/S1/S2 Standby | RX/S1/S2 Mode standby time (30min, 60min, 90min, OFF) | ||
| OFF Time Power Off | Auto power-off time (30min, 60min, 90min, OFF) | ||
| RX AF | RX AF / Enable or disable Slave unit ready indicator | ||
| Language Selection | CH/EN/DE/ES/IT/FR/RU/KO/JP/NL/VM | Language | |
| System Settings | Restore factory settings | Restore factory settings | |
| Model | Model | ||
| Version | Current software version |
10. Maintenance
10.1. General Care
- Always keep the product dry.
- Do not disassemble or modify the product.
- Clean contacts regularly if they appear dirty.
10.2. Battery Care
- Do not short circuit the battery.
- Do not immerse the battery in water.
- Keep the battery out of reach of children.
- Do not exceed 24 hours of continuous charging.
- Store the battery in a dry, cool, and ventilated environment.
- Do not place the battery near or in a fire.
- Dispose of dead batteries according to local regulations.
- If the battery is not to be used for some time, ensure it is charged at least every 3 months.
11. Troubleshooting
11.1. The Camera Flash Does Not Fire
- Issue: Flash not securely attached. Solution: Attach the hot shoe base mount securely.
- Issue: Electrical contacts are dirty. Solution: Clean the contacts.
- Issue: <H> icons do not appear in viewfinder. Solution: Wait for flash to finish charging. Check hot shoe connection. Check battery level.
11.2. Auto Power Off
- Issue: Flash set as Transmitter (Master) auto-powered off after 90 seconds. Solution: Press shutter button halfway or any flash button to wake up.
- Issue: Flash set as Receiver (Slave) entered sleep mode after 60 (or 30) minutes. Solution: Press any flash button to wake up.
11.3. Auto Zoom Does Not Work
- Issue: Camera flash not attached securely. Solution: Attach the camera flash's mounting base securely.
11.4. Flash Exposure Is Underexposed or Overexposed
- Issue: Highly reflective object in picture. Solution: Use FE lock (FEL).
- Issue: High-speed sync used. Solution: Effective flash range is shorter; ensure subject is within range.
- Issue: Manual Flash mode. Solution: Set flash mode to TTL or modify flash output.
11.5. Photos Have Dark Corners or Only Parts of the Target Subject Are Illuminated
- Issue: Focal length of lens exceeds flash coverage. Solution: Check focal length. This flash unit has coverage between 28-105mm.
11.6. 2.4G Wireless Flash Misfiring
- Issue: Interference from external factors (wireless hub, Wi-Fi, Bluetooth). Solution: Adjust channel (e.g., +10) or turn off other 2.4G devices.
- Issue: Flash not fully recycled or overheat protection triggered. Solution: Lower flash setting to manual mode (M) or allow flash to cool.
- Issue: Low power in flash detector or receiving device. Solution: Replace batteries.
12. Specifications (Technical Data)
| Category | Feature | Specification |
|---|---|---|
| Model & Power | Model | Z3R-S |
| Compatible Cameras | Sony DSLR cameras (TTL auto flash) | |
| Power (1/1 output) | 100Ws | |
| Flash Coverage | 28-105 mm (Auto zoom, Manual zoom) | |
| Flash Duration | 1/180 to 1/20000 seconds | |
| Exposure Control | Exposure Control System | TTL autoflash and manual flash |
| Flash Exposure Compensation (FEC) | Manual, FEB: ±3 stops in 1/3 stop increments | |
| Sync Mode | High-speed sync (up to 1/8000s), first-curtain sync, second-curtain sync | |
| RPT Flash | Autonomy (up to 100 times, 199Hz) | |
| Wireless Flash (2.4G) | Wireless Flash Function | Transmitter, Receiver, Off |
| Transmitter Groups | M, A, B, C | |
| Controllable Receiver Groups | A, B, C, D, E (D/E group can be controlled by QPRO series flash trigger) | |
| Transmission Range (approx.) | 100m | |
| Channels | 32 Groups: 01~32 | |
| Frequency Range | 2412.75MHz-2464.25MHz | |
| Power & Performance | Power Source | 7.2V/3000mAh Li-ion battery |
| Recycle Time | Approx 1.7 seconds | |
| Number of Flash in Full Power | Approx. 500 | |
| Energy-saving | Auto Power off after approx. 90 seconds (60 minutes if set as Receiver) | |
| Sync Triggering Mode | Hotshoe, 2.5mm sync line | |
| Modeling Lamp | Power | Upper: 2W / Lower: 2W |
| Color Temperature | 3300K±200K | |
| Physical | Dimensions | 76*76*215 mm |
| Net weight without battery | 505g | |
| Weight with battery | 625g | |
| Operating Temperature | 0°C ~ 40°C |
13. Firmware Upgrade
The firmware of this product can be upgraded through the USB port. The latest software announcements and instructions will be published on the official website.
- This product does not come with a USB cable for the firmware upgrade. Please purchase separately. The USB port of this product is a Type-C port. Please use only a USB Type-C cable.
- Upgrading the firmware requires Neewer Firmware software support. Please download and install "Neewer Firmware Update", and then select the corresponding firmware file before updating.
- As the product is undergoing a firmware upgrade, please refer to the latest electronic version of the manual.
14. Restore Factory Settings
To restore the flash to its factory settings:
- Enter the menu and tap the gear icon for System Settings.
- Tap the reset icon to enter and confirm.
15. Compatible Cameras
The NEEWER Z3R-S is compatible with the following Sony DSLR cameras:
α6600, α6500, α6400, α6100, α6000, α99, α9II, α7M3, α7RIII, α7S3, α7R4, α7, α7C, α7S, α7S II, α7 II, α7R II, α7 IV, α1, α9, α350
Note: This table only lists the tested models. Other models can be tested by the user.
16. User Tips
- Battery Management: Always keep a spare charged battery for extended shooting sessions, especially when using high power or stroboscopic modes.
- Firmware Updates: Regularly check the NEEWER official website for firmware updates to ensure optimal performance and compatibility with new camera models.
- Wireless Setup: When using multiple flash units wirelessly, perform a test flash and test shot before critical shooting to confirm proper communication and exposure.
- Overheating Prevention: Be mindful of continuous high-power flashes. Allow the unit to cool down as recommended in the manual to prolong its lifespan.
- Touchscreen Care: Keep the touchscreen clean and avoid sharp objects to prevent scratches.
17. Warranty and Support
This product comes with a 1-year warranty. For detailed warranty information, technical support, or to download the full user manual in PDF format, please visit the official NEEWER website or refer to the provided PDF manual: NEEWER Z3R-S User Manual (PDF).
18. Product Demonstration Video
Watch this video for a visual guide on the features and operation of the NEEWER Z3R-S TTL Camera Flash:
Video: NEEWER Z3R-S TTL Camera Flash Features and Usage