MEKEDE MTK6762 Android 14 Car Radio for BMW 3 Series E90 E91 E92 E93

Contents

MEKEDE Android 14 Wireless Carplay Auto Car Radio User Manual

Model: MTK6762 Android 14 Car Radio for BMW 3 Series E90 E91 E92 E93

Brand: MEKEDE

Introduction

Thank you for purchasing the MEKEDE Android 14 Wireless Carplay Auto Car Radio. This manual provides comprehensive instructions to help you properly install, operate, and troubleshoot your new multimedia system. Please read through these instructions carefully to ensure optimal performance and a seamless user experience.

This unit is designed to enhance your driving experience with advanced features such as Android 14 operating system, wireless Carplay and Android Auto, a high-definition 10.25-inch display, DSP audio processing, GPS navigation, 4G connectivity, and Wi-Fi capabilities. It is specifically compatible with BMW 3 Series E90, E91, E92, and E93 models from 2005 to 2012.

MEKEDE Android 14 Car Radio installed in a BMW dashboard

Figure 1: MEKEDE Android 14 Car Radio installed in a BMW dashboard.

Before and After Installation of the MEKEDE Car Radio

Figure 2: Comparison of the car interior before and after installation of the MEKEDE Car Radio.

Setup and Installation

This section details the physical installation and initial setup of your MEKEDE car radio. For a visual guide, please refer to the official user manual PDF: User Manual (PDF).

1. Machine Interface Overview

Familiarize yourself with the various interfaces on the back of the main unit:

Rear view of the car radio showing various connection ports

Figure 3: Rear view of the main unit with labeled interfaces.

  1. Power Cord Interface
  2. RCA Cable or 360 Cable Interface
  3. External SIM card slot cable interface
  4. USB Cable Interface
  5. NC (Not Connected)
  6. External microphone interface
  7. NC (Not Connected)
  8. LVDS Cable Interface (Connect the LVDS cable removed from the original car screen)
  9. GPS antenna interface
  10. 4G antenna interface
  11. WiFi antenna interface

2. Cable Instructions

The following cables are included for connection:

Various connection cables included with the car radio

Figure 4: Included connection cables.

  1. Power cord
  2. VIDEO RCA cable
  3. MIC External microphone cable
  4. USB cable
  5. SIM External SIM card cable
  6. GPS antenna
  7. 4G antenna
  8. WiFi antenna
  9. Audio connection cable

3. Wiring Method of the Power Cord

3.1 Wiring method (For EVO)

Wiring diagram for EVO models

Figure 5: Power cord wiring for EVO systems. Transfer the power cord from the original car CD player and plug into the Android device.

3.2 Wiring method (For CCC/CIC/NBT)

Wiring diagram for CCC/CIC/NBT models

Figure 6: Power cord wiring for CCC/CIC/NBT systems. Transfer the power cord from the original car CD player and plug into the Android device.

Optical Fiber Cable Handling: If your original vehicle CD player's power cord plug has an optical fiber cable, it must be moved to the power cord plug of the Android device. Pay close attention to the position and direction of the optical fiber cable during this transfer.

Steps for connecting the optical fiber cable

Figure 7: Steps for connecting the original car fiber optic cable to the conversion line and then to the host.

4. Camera Setting and Wiring Method

4.1 Settings for Original Car Camera or Original Car 360 Camera:

  • Navigate to "Settings" > "System Settings" > "Reversing settings" > "Original Camera".
Screenshot of camera settings for original car camera

Figure 8: Selecting "Original Car Camera" in system settings.

4.2 Aftermarket Rear Camera Settings:

  • Navigate to "Settings" > "System Settings" > "Reversing settings" > "Aftermarket Camera".
Wiring diagram for aftermarket rear camera

Figure 9: Wiring method for an aftermarket rear camera. Connect the CAMERA +12V, Rear Camera input, and GND to the Android device and power cable.

4.3 Android Built-in 360 Camera Settings:

  • Navigate to "Settings" > "System Settings" > "Reversing settings" > "Android 360" > "1080P".
Wiring diagram for Android built-in 360 camera

Figure 10: Wiring method for an Android built-in 360 camera system.

Operating Instructions

5. Original Vehicle Display Settings

To access the original vehicle interface, click the vehicle information icon on the main interface of the Android system.

Screenshot of the main interface showing vehicle info icon

Figure 11: Main interface with vehicle information icon highlighted.

5.1 Screen Parameter Configuration:

  • Go to "Settings" > "Factory Settings" (Password: 1314).
  • Select "Original Car Display", then click "Adaptive Resolution", and finally "Start".
  • If successful, click "Close". If "Adaptive Resolution" doesn't work, manually select screen parameters by sliding up/down the options.
  • If there is no display after configuration, turn off the device, reconnect the LVDS cable and the original car power cable, then restart.
Screenshot of screen parameter settings

Figure 12: Factory settings for screen parameters and adaptive resolution.

6. Sound Settings

6.1 AUX Settings:

  • Go to "Settings" > "System Settings" > "AUX Settings".
  • Do NOT select "Auto-switch AUX"; choose "Custom" for the AUX switching scheme.
Screenshot of AUX sound settings

Figure 13: AUX settings menu, showing "Custom" selection.

6.2 Entering Android Interface for Audio:

  • Enter the original vehicle interface.
  • Select "Media" > "AUX" (for CCC/CIC/NBT) or "Bluetooth audio" (for EVO).
  • Then, click the touchscreen or long-press the MENU key of the iDrive controller to enter the Android interface and play music or videos.
Screenshot of original system audio settings

Figure 14: Original system audio settings, showing how to select AUX mode.

Troubleshooting

7. Common Installation Problems

7.1 The device doesn't shut down and the knob doesn't work.

  • 7.1.1 Check for any modified modules in the original vehicle power cord. If found, remove them.
  • 7.1.2 Ensure the fiber optic cable has been correctly moved to the Android power cord plug.
  • 7.1.3 In factory settings, enter "CAN protocol option". After switching the protocol, press the RST key or reconnect the original vehicle's power cable and restart the unit.

7.2 No sound.

  • 7.2.1 First, verify the connection method of the audio plug on the power cord.
  • 7.2.2 Check if there is sound from the original car's FM radio. Then, check the AUX settings and select manual switching of AUX. Enter the original car interface, select "Media" > "AUX" or "Bluetooth audio", and then enter the Android interface to play music.
  • 7.2.3 If there is no sound on the original vehicle's FM either, check whether the fiber optic cable has been moved to the Android cable. Pay attention to the position and direction of the fiber optic cable.
Wiring diagram for AUX connection to resolve no sound issue

Figure 15: Correct AUX connection to resolve no sound issues. Transfer the power cord from the original car CD player and plug into the AUX port of the original vehicle.

7.3 The interface doesn't switch when reversing.

  • Enter the "Gear Selection" in the "Vehicle" option within the factory settings, and try each of the three gear types one by one.
Screenshot of Gear Selection settings

Figure 16: Gear Selection options in factory settings.

7.4 When reversing, the reversing interface cannot be exited.

  • Turn off the original vehicle radar button.
Image showing the original vehicle radar button

Figure 17: Location of the original vehicle radar button to be turned off.

Specifications

FeatureSpecification
Built-in DVD PlayerYes
Built-in CD playerYes
Chipset8core
Processor TypeMTK6762
Is touch screenYes
Built-in ScreenYes
TF/Micro SD Slot1
DinDouble Din
RAM6G
Interfaceplug and play
Operating SystemAndroid
Out Power4*45W
Voltage12 V
Output TypeColored
Max External Memory128G
Special FeaturesBuilt-In Speaker/Microphone, wifi function, Support 3G Network, Support 4G Network, Support Can-Bus, Built-in GPS, Charger, Mobile Phone, MP3 players, Voice Control, dsp, CarPlay, android auto, Reversing Input, Split Screen, Support steering wheel control
Digital Media FormatCD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG
OSD LanguageMulti-language support including English, Chinese, Arabic, German, French, Spanish, Portuguese, Russian, Japanese, Korean, etc.
Display Size10.25 inches
Brand NameMEKEDE
CertificationCE, FCC, UL
OriginMainland China
SupportGPS Navigation
Voice ControlOptional (need to buy alone)
Screen Resolution1920*720
OSAndroid 14
CPU InformationMTK6762
Wireless CarplayBuilt-in
Wireless Android AutoBuilt-in
Rearview CameraSupport (need to buy alone)
ADAS DVRSupport (need to buy alone)
OBD2Support (need to buy alone)
TPMSSupport (need to buy alone)
Steering wheel controlsSupport
4G WIFISupport
Split ScreenSupport

Maintenance

To ensure the longevity and optimal performance of your MEKEDE car radio, consider the following maintenance tips:

  • Keep the Screen Clean: Use a soft, lint-free cloth to gently wipe the display. Avoid abrasive cleaners or harsh chemicals that could damage the screen.
  • Software Updates: Regularly check for and install official firmware and software updates provided by MEKEDE. These updates often include performance improvements, bug fixes, and new features.
  • Cable Connections: Periodically check all cable connections to ensure they are secure and free from corrosion or damage. Loose connections can lead to intermittent issues.
  • Avoid Extreme Temperatures: While designed for automotive use, prolonged exposure to extreme heat or cold can affect electronic components.
  • System Reset: If the system becomes unresponsive or exhibits unusual behavior, a soft reset (usually by pressing a designated reset button or power cycling the vehicle) can often resolve minor glitches. Refer to the troubleshooting section for specific reset instructions.

User Tips

Here are some tips to enhance your experience with the MEKEDE Android 14 Car Radio:

  • Verify Compatibility: Before installation, double-check that the unit is fully compatible with your specific BMW 3 Series model (E90, E91, E92, E93) and year (2005-2012) to avoid installation issues.
  • Professional Installation: If you are not confident with car electronics, consider professional installation to ensure all wiring, especially the optical fiber cable transfer, is done correctly.
  • Test All Functions: After installation, thoroughly test all features including audio, video, GPS, Bluetooth, Carplay/Android Auto, and camera inputs before reassembling your dashboard.
  • Customize Settings: Explore the extensive settings menu, including DSP audio adjustments and UI themes, to personalize your driving experience.
  • Backup Important Data: While not typically storing user data, if you use the unit for personal files, consider backing them up periodically.

Warranty and Support

The product comes with a 3-year warranty. MEKEDE SIMON Car Radio Store is committed to continually improving its products. We offer free firmware, software, user interface, and GPS navigation map updates to ensure you have the best possible experience.

For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the MEKEDE SIMON Car Radio Store directly. Keep your purchase records handy for faster service.

For additional guides and documents, you can refer to the official user manual PDF: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.