AJAZZ AHM10 MAX

Contents

AJAZZ AHM10 MAX Wireless Bluetooth Gaming Headset User Manual

Model: AHM10 MAX

1. Product Overview

The AJAZZ AHM10 MAX is an over-ear gaming headset designed for an immersive audio experience. It features tri-mode connectivity (2.4G wireless, Bluetooth, and wired), a long-lasting 2000mAh battery, multiple RGB dynamic lighting effects, AI noise cancellation, virtual 7.1 surround sound, and driver support for customization.

AJAZZ AHM10 MAX Over-Ear Gaming Headset
AJAZZ AHM10 MAX Over-Ear Gaming Headset with RGB lighting.

2. Package Contents

Please check the package for the following items:

Package contents of AHM10 MAX headset
Diagram showing all items included in the AHM10 MAX package.
  1. Free football cloth earmuffs (1 pair)
  2. Type-C to USB-A data cable
  3. Type-C to 3.5mm audio cable
  4. Product manual
  5. 2.4G wireless transmitter (dongle)
  6. Detachable microphone
  7. AHM10 MAX Headset

3. Setup and Connectivity

3.1 Attaching the Microphone

The AHM10 MAX features a detachable microphone. Simply plug the microphone into the designated port on the left earcup until it clicks securely into place. To remove, gently pull it out.

3.2 Tri-Mode Connection

The headset supports three connection modes: 2.4G Wireless, Bluetooth (BT), and Wired.

Tri-mode wireless connection diagram
Diagram illustrating the three connection modes: Detachable Dongle (2.4GHz), BT Connection, and Wired Connection.

2.4G Wireless Connection (Ultra-Low Latency)

  1. Plug the 2.4G wireless transmitter (dongle) into a USB-A port on your PC, laptop, or compatible gaming console.
  2. Slide the mode switch on the headset to the '2.4G' position.
  3. The headset should automatically connect to the dongle. The one-way transmission latency is as low as 10ms.

Bluetooth (BT) Connection

  1. Slide the mode switch on the headset to the 'BT' position.
  2. On your device (phone, tablet, etc.), go to Bluetooth settings and search for 'AJAZZ AHM10 MAX'.
  3. Select the headset to pair.

Wired Connection

  1. Connect one end of the Type-C to 3.5mm audio cable to the headset's Type-C port.
  2. Connect the 3.5mm end to your device's 3.5mm audio jack.
  3. Slide the mode switch on the headset to the 'Wired' position.

4. Operating Instructions

4.1 Power On/Off

Locate the power button on the headset. Press and hold for a few seconds to power on or off. An indicator light will confirm the status.

4.2 Volume Control

The headset is equipped with a volume control. Adjust the volume using the dedicated scroll wheel or buttons on the earcup.

4.3 RGB Dynamic Lighting Effects

The AHM10 MAX features multiple RGB dynamic lighting modes. These gradient lighting effects create a personalized immersive esports atmosphere. Refer to the full user manual (PDF) for specific controls to cycle through lighting modes.

Headset with flowing RGB ambient light
Headset showcasing flowing and dazzling RGB LED ring bionic breathing ambient light.

4.4 AI Noise Cancellation

The headset incorporates hardware-level AI noise cancellation to effectively block full-frequency noise. The AI environmental noise cancellation via a hardware chip filters out ambient noises like keyboard clicks and fan hums, enhancing your immersion.

AI noise cancellation feature
Illustration of hardware-level AI noise cancellation blocking environmental sounds.

4.5 Virtual 7.1 Surround Sound

Experience virtual 7.1 surround sound for 360° sound localization. This feature allows you to easily pinpoint sound sources from all directions, helping you quickly locate enemies and secure quick eliminations in games.

Virtual 7.1 surround sound demonstration
A gamer wearing the headset experiencing virtual 7.1 surround sound, with visual cues indicating sound direction.

4.6 Driver Software Customization

The headset supports PC driver software, offering multiple customization options. This includes various volume adjustments, multi-band EQ sound effects, virtual 7.1 surround sound settings, and other game sound effects. Install the official AJAZZ driver software for full functionality.

Driver software interface for customization
Screenshot of the AJAZZ self-developed driver interface showing various sound customization options.

5. Maintenance

5.1 Cleaning

Wipe the headset with a soft, dry cloth. Do not use harsh chemicals or abrasive materials. For the earpieces, use a slightly damp cloth if necessary, and ensure they are completely dry before use.

5.2 Battery Charging

The headset is equipped with a 2000mAh battery, providing approximately 143 hours of usage. Charging takes approximately 5 hours. Use the provided Type-C to USB-A data cable to charge the headset. Connect the Type-C end to the headset and the USB-A end to a power source (e.g., computer USB port, USB wall adapter).

5.3 Earpiece Replacement

The package includes an extra pair of football cloth earmuffs. To replace the earpieces, gently twist and pull off the existing ones. Align the new earpieces with the headset and press them firmly until they are securely attached.

6. Troubleshooting

If you encounter any issues with your AJAZZ AHM10 MAX headset, please refer to the following common solutions:

  • No Sound:
    • Check the volume level on both the headset and your connected device.
    • Ensure the correct connection mode (2.4G, BT, or Wired) is selected on the headset.
    • For 2.4G, ensure the dongle is properly inserted and recognized by your device.
    • For Bluetooth, ensure the headset is paired and connected in your device's Bluetooth settings.
    • For wired, ensure the 3.5mm cable is fully inserted into both the headset and your device.
  • Microphone Not Working:
    • Ensure the microphone is securely attached to the headset.
    • Check microphone settings on your computer or device to ensure the headset microphone is selected as the input device.
    • Ensure the microphone is not muted (check for a mute button on the headset or in software).
  • Connection Issues:
    • If using 2.4G wireless, try plugging the dongle into a different USB port.
    • If using Bluetooth, try unpairing and re-pairing the headset with your device.
    • Ensure the headset is fully charged.
    • Move closer to your device to rule out range issues.
  • RGB Lights Not Working:
    • Ensure the headset is powered on.
    • Check the driver software for lighting settings.

For more detailed troubleshooting steps, please consult the official user manual (PDF) available at this link.

7. Specifications

The following table outlines the key specifications of the AJAZZ AHM10 MAX Gaming Headset:

Product specifications table
Detailed product specifications, including a comparison with AHW10 model.
FeatureSpecification
Product NameAJAZZ GAMING HEADSET
ModelAHM10 MAX
Color OptionsBlack, White
LightingRGB dazzling lights
Sound EffectCustom-tuned gaming sound, Virtual 7.1 Surround Sound
Driver Unit53mm oversized dynamic driver
Chip TechnologyProfessional gaming sound card chip (C-MEDIA)
HeadbandUltra-Light aluminum frame headband, Adaptive bone shaft
EarpiecesSpace memory foam + Skin-friendly protein leather
Battery Capacity2000mAh
Battery Life~143H
Charging Time~5H
Microphone360° Omnidirectional noise-canceling mic
Latency10ms One-way (2.4G Wireless)
Transmission RangeWireless range ≥10m
FeaturesSupports EQ adjustment, 7.1 sound, Mic boost/Noise-canceling, Voice changer
DriverSelf-developed driver (Client-side)
Compatible PlatformsPC/Laptop/SWITCH/Phone/Tablet
Connection Method2.4G/BT/Wired
Dimensions160mm (W) × 93mm (D) × 195mm (H)
Weight340g ± 5g

8. User Tips

  • Sound Tuning: For optimal sound quality, it is recommended to fine-tune the audio settings using the dedicated AJAZZ application on Windows. For mobile devices, the Wavelet app in legacy mode can be used for tuning.
  • Battery Life: The 143-hour battery life is based on tests at 50% volume with lights off. Actual battery life may vary based on volume, lighting usage, and other settings.

9. Additional Resources

For further details, including comprehensive troubleshooting and advanced features, please refer to the complete user manual in PDF format:

Download User Manual (PDF)

If you require further assistance, please contact AJAZZ customer support.

10. Product Demonstration Video

Watch this video for an unboxing and demonstration of the AJAZZ AHM10 MAX headset's features and components.

Video demonstrating the unboxing, components, and RGB lighting of the AJAZZ AHM10 MAX headset.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.