1. Introduction and Safety Warnings
This manual provides important information for the safe and proper operation of your 4DRC L2 RC Helicopter. Please read it thoroughly before use and retain it for future reference.
1.1 Important Safety Warnings
- The packaging and instructions contain important information and should be retained.
- You are responsible for ensuring that this aircraft does not cause harm to the personal and property of others.
- Debugging and installing the aircraft must be strictly operated according to the operating manual. Maintain a distance of 2-3 meters from the user or others during flight to avoid hitting the head, face, and body, which may cause injury.
- Our company and the seller are not responsible for any loss and damage caused by improper use or operation as well as human injury.
- Children under the age of 14 are prohibited from operating this product. Adults must guide children when operating the aircraft.
- Follow the instructions or packaging for proper installation and use. Some parts should be assembled by adults.
- The product contains small parts; keep them out of reach of children to prevent accidental ingestion or respiratory hazards.
- It is strictly prohibited to play on the road or in areas with accumulated water to avoid accidents.
- Handle packaging materials in a timely manner to avoid harm to children.
- Do not disassemble or modify the aircraft, as this may cause malfunction.
- The charging cable needs to be inserted into the designated power supply 5V-2A that matches the product label.
- Using other charging cables can cause battery damage and may pose a risk of accidents.
- Charging cables are not toys.
- When charging a rechargeable battery, it must be done under the supervision of an adult. Keep it away from flammable materials and do not leave the monitoring range.
- Do not short circuit or squeeze the battery to avoid explosion.
- Do not mix different types of batteries.
- The aircraft uses rechargeable batteries and needs to be unplugged for charging.
- Do not short circuit, disassemble, or put the battery into fire. Do not place the battery in a high-temperature or heated area (such as in a fire or near an electric heating device).
- Aircraft should be used as far away as possible from other electrical equipment and magnetic objects, as they may cause mutual interference.
- Maintain a safe distance from the high-speed rotating propeller to avoid the risk of twisting and cutting.
- The motor is a heating component; do not touch it to avoid burns.
- Light emitting diode laser radiation; do not look directly at the beam.
- Do not use the model close to the ear! Misuse may cause hearing damage.
- The USB charging cable must be the one provided by our company; otherwise, it may cause serious damage to the battery and even lead to accidents.
- To ensure the magnetic environment requirements of aviation radio stations, during periods when relevant national departments issue radio control orders, the use of model remote controllers within the district should be stopped as required.
- When the battery of the aircraft is depleted, be sure to turn off the switch and unplug the battery. After standing still for 30 minutes, charge it, otherwise it is easy to cause battery damage.
2. Package Contents
Verify that all items are included in your package:
- 1 × 4DRC L2 RC Helicopter
- 1 × Built-in Screen Remote Controller
- 1 × 3.7V 500mAh Li-Po Battery
- 1 × USB Charging Cable
- 1 × 32GB Micro SD Card + Card Reader
- 1 × Decorative Display Base
- 1 × User Manual
- Spare Main Rotor Blades & Tail Rotor
- 1 × Screwdriver
- 1 × Allen Wrench
- 1 × Bracket

3. Product Overview
3.1 Aircraft Parts Diagram


3.2 Remote Controller Layout

4. Setup and Assembly
4.1 Propeller/Tail Rotor Installation
- Use an Allen wrench to unscrew the bolts and remove the propellers.
- Grip both ends of the tail rotor hub and pull it off to remove it.

Note: The propellers are marked with letters C and D, where C = D. Install them according to the CC/DD letter markings. Correct installation is mandatory; otherwise, the aircraft will not take off.
4.2 Lithium Battery Charging
- Remove the Battery: Securely grip both ends of the aircraft battery and pull it out to remove it.
- Insert the USB connector of the USB charging cable into a computer USB port (or use a power adapter with an output of 5V-2A).
- Connect the other plug of the USB charging cable to the battery socket.
- The red indicator light will turn on during charging. The indicator light will turn off when the battery is fully charged.

WARNING: Only use the aircraft charging cable provided by the manufacturer for charging. Do not use any other charging cables. Remember this strictly to avoid accidents and potential hazards.
4.3 Remote Controller Battery
The remote controller is equipped with a built-in 3.7V rechargeable battery, which is non-detachable and non-replaceable.
CHARGING PRECAUTIONS:
- When charging the battery, do not allow children to use the charger alone. Charging must be conducted under adult supervision. Keep the battery away from flammable materials during charging, and the supervisor must not leave the model aircraft unattended or outside the monitoring range.
- Do not short-circuit or squeeze the battery to prevent explosion.
- The power connector shall not be removed from the model, and the connector shall not be short-circuited. Never short-circuit, disassemble, or throw the battery into fire. Never place the battery in high-temperature or heated areas (e.g., near fire or electric heating devices).
- The model aircraft shall only use the recommended charging cable. Inspect the cable's wires, plug housing, and other components for damage regularly. Stop using the cable immediately if damage is found, and do not resume use until it is fully repaired.
- After flight, charge the battery before storage. If the battery is not in use, it is recommended to charge it at least once every 3 months to prevent permanent damage caused by over-discharging.
WARNING: Do not leave the battery installed in the aircraft when not in use to prevent battery damage.
5. Operation
5.1 Pre-Flight Environmental Requirements
Fly in an open outdoor area with no snow, no wind, or light wind. During flight, keep away from crowds, trees, power lines, tall buildings, airports, signal towers, and other such hazards. Do not fly in a small, cluttered indoor environment.
WARNING: When operating with the remote controller, the APP can only be used for viewing (photo/video recording). If the APP is used for operation, the remote controller will be unavailable.
5.2 Power On and Pairing
- Fully charge the battery and install it on the aircraft.
- Press and hold the power switch button on the battery to turn it on (press and hold to turn it off).
- Place the aircraft on a level surface; it will automatically enter pairing mode with blue lights flashing.
- Press the power switch button on the remote controller. The remote controller will emit a beep.
- When pairing is successful, the aircraft's lights will stop flashing and remain on.
Attention: Turn the plane in the right direction, with the nose facing straight ahead, and make sure to place it on a level ground.
WARNING: Ensure the aircraft and remote controller have sufficient battery power; otherwise, the aircraft will not take off!
5.3 Horizontal Calibration
- Press the calibration button on the remote controller briefly. The LED lights on the aircraft will flash rapidly.
- When the LED lights on the aircraft stay on, the calibration is complete.
Note: Calibration can only be completed when the aircraft is placed on a level surface.
5.4 One-Key Takeoff/Landing
Press the remote controller's One-Key Takeoff/Landing button briefly. The aircraft will automatically ascend to an altitude of approximately 1 meter and hover steadily. Press the button briefly again, and the aircraft will automatically and slowly descend to the ground.
5.5 Flight Controls
- Ascend/Descend: Push the left control stick up, and the main rotor speed will increase, causing the aircraft to ascend. Push the left control stick down, and the main rotor speed will decrease, causing the aircraft to descend.
- Forward/Backward: Push the right control stick up, and the aircraft will move forward. Push the right control stick down, and the aircraft will move backward.
- Left/Right Flight: Push the right control stick to the right, and the aircraft will fly to the right. Push the right control stick to the left, and the aircraft will fly to the left.
- Left/Right Rotation: Push the left control stick (rudder) to the left, and the aircraft's nose will turn left. Push it to the right, and the nose will turn right.
5.6 Speed Switching
When the aircraft takes off, it defaults to Low Speed Mode (3-speed gear switching). A short press on the remote controller will trigger a beep: one beep for Low Speed Gear, two beeps for Medium Speed Gear, and three beeps for High Speed Gear.
5.7 Light Control
Press the light mode button briefly to turn the aircraft's lights on or off.
5.8 Normal Mode (Optical Flow Positioning)
To enter Normal Mode: Fly the aircraft over a suitable surface. The optical flow system will assist the aircraft in hovering in place. A drift of approximately 1 meter is normal, depending on ground and altitude conditions.

5.9 Trim Function
Press the trim button briefly for a beep, then make adjustments. Press the trim button briefly again to exit trim mode.
- Forward Trim Adjustment: When the aircraft is airborne and drifts rearward, push the Forward Trim button forward to make adjustments.
- Backward Trim Adjustment: When the aircraft is airborne and drifts forward, push the Backward Trim button backward to make adjustments.
- Left Flight Trim Adjustment: When the aircraft is airborne and drifts rightward, push the Left Flight Trim button leftward to make adjustments.
- Right Flight Trim Adjustment: When the aircraft is airborne and drifts leftward, push the Right Flight Trim button rightward to make adjustments.
5.10 APP Software Download and Installation
Scan the QR code to download the APP for your phone (iOS or Android).

5.11 Connect Devices
Connect or not, if not, please manually connect the hotspot, there is no password. After starting your device, please check whether the hotspot called "MB_XX_****"/"WIFI-QX-****".
5.12 APP Functions
- Palm Control Flight: Click the palm control button, then raise the palm vertically, aiming at the camera of the drone. The video will automatically recognize the palm, and when a red frame appears, the palm control mode is entered. The aircraft will follow the palm up and down. The best distance between the palm and the camera is about 1.2m.
- Gesture and Vision Mode: Click the gesture button. The system will automatically recognize different gestures to take pictures or videos.
- "Yeah" gesture (one-handed flat, 1m-4mm from camera) takes pictures after a 3,2,1 countdown.
- Palm gesture (five fingers separated, 1m-4mm from camera) starts video recording. End recording when the gesture is recognized again.
- Picture in Picture Mode: View live video images of the lens below the drone in real time. On the control page, click the PIP switch to display the video footage captured by the lens. You can freely switch the size of the preview image of the two lenses.
- Entertainment Mode: Access various functions like Camera Lens Filter, Album, Rocker open, Select Music, Return, Rotating, Taking Pics, Video, Emergency Stop, Left Remote, Right Remote.
6. Maintenance
- Regularly inspect the propellers for any damage or cracks. Replace immediately if damaged.
- Keep the helicopter and remote controller clean. Use a soft, dry cloth to wipe surfaces.
- Store the helicopter and its components in a cool, dry place away from direct sunlight and extreme temperatures.
- Ensure the battery is charged at least once every 3 months if not in regular use to prevent permanent damage.
- Always turn off the aircraft and unplug the battery after use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control operation of the aircraft has no response | Remote control failed to connect to aircraft | Turn off the remote control and helicopter power, then perform the connection operation again. |
| After the helicopter is connected to the battery, the aircraft indicator light is not on | Due to low battery or low voltage | Fully charge the battery. |
| Charging the battery, charging cable indicator light is not bright | Battery damage or the charging cable may be damaged | Replace with a new battery or charging cable. |
| After the remote control is successfully connected to the aircraft, the helicopter cannot start, propeller not rotational | Maybe the motor is damaged | Replace the motor with a new one. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | L2 Helicopter |
| Model | 4D-L2 |
| Material | ABS Plastic / Electronic Components |
| Body Dimensions | 33 x 8 x 9 cm |
| Scale | 1:28 Military Apache |
| Color | Gray-Blue |
| Channels | 6CH (6-Channel) |
| Gyro | 6-Axis Stabilization |
| Flight Weight | <250g (No FAA Registration Required) |
| Flight Time | 10-12 minutes |
| Charging Time | Approx. 90-120 minutes |
| Control Mode | 2.4G Remote Controller (MODE2) |
| Remote Distance | 100-150 meters |
| Aircraft Battery | 3.7V 500mAh Li-Po (Included) |
| Controller Battery | 3x 1.5AA (not included) |
| Charging Voltage | 3.7V |
| Power Source | Electric |
| Plugs Type | USB |
| Video Capture Resolution | 8K UHD, Other |
| Aerial Photography | Yes |
| Camera Mount Type | Fixed Camera Mount, Other |
| Indoor/Outdoor Use | Indoor-Outdoor |
| Operator Skill Level | Beginner, Intermediate, Expert |
| Anti-wind Ability | <10km/h |
| Motor | Brushless Motor |
| State of Assembly | Ready-to-Go |
| Features | App-Controlled, Built-in LCD Screen Remote, Barometric Pressure Sensor, Modular Batteries, Special Maneuvers, Optical Flow Positioning |


9. User Tips
- The helicopter flies well with no reported issues, indicating good stability and control.
- The product is considered good value, suggesting a satisfactory performance for its price.
- The remote control comes complete with a battery, but the remote itself requires 3x AA batteries (not included).
10. Warranty and Support
For any issues or questions regarding your 4DRC L2 RC Helicopter, please refer to the official user manual PDF for detailed warranty information and contact the seller's customer support. The user manual PDF can be viewed here.
