EACHINE E188 AirWolf

Contents

Eachine E188 AirWolf RC Helicopter User Manual

Model: E188 AirWolf

Brand: EACHINE

1. Introduction

Welcome to the world of remote-controlled flight with your new Eachine E188 AirWolf RC Helicopter. This manual provides essential information for the safe operation, setup, and maintenance of your helicopter. Please read it thoroughly before your first flight.

Safety Warnings

⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

Recommended Age: 14+ years.

2. Package Contents

Verify that all items listed below are included in your package:

  • 1x E188 Helicopter
  • 1x User Manual
  • 1x Transmitter (Remote Control)
  • 1x USB Charging Cable
  • 2x Main Blades (Replacement)
  • 1x Tail Blade (Replacement)
  • 7.4V 1200mAh Smart Battery (Quantity: 1, 2, or 3 depending on package)
  • 1x Screwdriver
  • 1x Hex Key
Diagram showing the E188 AirWolf helicopter and all included accessories: instruction manual, main blades, smart battery, remote control, hex key, screwdriver, tail blade, and USB charging cable.
Figure 2.1: E188 AirWolf Package Contents and Dimensions

3. Specifications

Table 3.1: E188 AirWolf Technical Specifications
Attribute Value
Brand NameEACHINE
Model NumberE188 Helicopter
TypeHELICOPTER
MaterialMetal, Plastic, Carbon Fiber (High-strength composite materials)
Dimensions (L x H)415mm x 118mm
Rotor Diameter375mm
Unit Weight310g
Remote Control Mode2.4G Remote Control
Remote DistanceGreater than 350 meters
Controller ModeMODE2
Control Channels2 CHANNELS
Body BatteryLI-POLY Smart Battery 7.4V 1200mAh 25C
Is Batteries IncludedYes
Charging VoltageAs shown (7.4V)
Charging TimeAbout 70 Minutes
Flight Time11-13 Minutes
Motor TypeBrushless Motor (Tail Motor 1206 5500KV)
Camera Mount TypeFixed Camera Mount
Video Capture Resolution1080p FHD
Aerial PhotographyNo
Operator Skill LevelBeginner
Indoor/Outdoor UseOutdoor
State of AssemblyReady-to-Go
FeaturesApp-Controlled, 6-axis gyro, Optical Flow Localization, LiDAR TOF Altitude Hold, One-Key Inverted Flight, One-touch Landing, Bi-directional Feedback, Low Battery Alarm
Product Information Sheet table with specifications for the E188 helicopter including name, remote control mode, distance, unit weight, material, age, battery, charging time, usage time, color, and replacement parts.
Figure 3.1: Detailed Product Information Sheet
Diagram showing the high-precision CNC rotor head and a 2511 1200KV brushless motor, highlighting its high temperature resistance.
Figure 3.2: High-Precision CNC Rotor Head and Brushless Motor

4. Setup Guide

4.1 Battery Charging

The E188 AirWolf uses a LI-POLY Smart Battery 7.4V 1200mAh 25C. Before first use, fully charge the battery.

  1. Connect the provided USB Charging Cable to the battery.
  2. Plug the other end of the USB cable into a suitable USB power source (e.g., computer USB port, USB wall adapter).
  3. The charging time is approximately 70 minutes. Refer to the battery's indicator lights for charging status (if available).
Close-up image of the 7.4V 1200mAh 25C Lithium Polymer Smart Battery, showing its specifications and 'MADE IN CHINA' label.
Figure 4.1: High-Rate Lithium Polymer Battery

4.2 Battery Installation

Carefully insert the charged battery into the helicopter's battery compartment. Ensure it is securely seated to prevent dislodging during flight.

4.3 Remote Control Preparation

The remote control operates on a 2.4G frequency. It requires its own batteries (not included) and needs to be bound to the helicopter.

  1. Install the required batteries into the remote control.
  2. Power On: Toggle the button to the left to turn on the power.
  3. Binding: To align frequency and bind the remote control to the helicopter, toggle the left button on the remote control. Refer to the remote control diagram for exact button location.
Detailed diagram of the remote control with labels for Gas Pedal Unlock, Throttle Lock, Boot Key, Throttle/Direction Rocker, Debug Pitch, One Touch Landing, Optical Flow Mode, Manual Mode, Large and Small Rudder Volume Buttons, and Power Toggle/Align Frequency Binding button.
Figure 4.2: Remote Control Instructions and Layout

5. Operating Instructions

Always operate the E188 AirWolf in an open, clear area, away from people, animals, and obstacles. This helicopter is designed for outdoor use.

5.1 Basic Flight Controls

Familiarize yourself with the remote control's joysticks and buttons for basic maneuvers:

  • Upwards/Downwards: Control altitude using the throttle stick.
  • Left/Right Flight: Sideways movement.
  • Turn Left/Right: Rotate the helicopter on its axis.
  • Forward/Backwards: Control forward and backward movement.
Diagram illustrating basic flight functions of the helicopter: Upwards, Downwards, Right Flight, Left Flight, Turn Right, Turn Left, Forward, and Backwards.
Figure 5.1: Basic Flight Functions

5.2 Advanced Flight Features

  • 6-Axis Gyro Self-Stabilization: The built-in 6-axis gyroscope provides excellent stability, making it easier for beginners to control.
  • Optical Flow + LiDAR TOF Altitude Hold: This technology allows for precise positioning and stable hovering. The LiDAR TOF provides high-precision, fast response, and strong anti-interference capabilities for real-time altitude information.
    Image showing the E188 helicopter hovering with a visual representation of optical flow and LiDAR TOF altitude hold technology, including a close-up of the LiDAR TOF sensor.
    Figure 5.2: Optical Flow + LiDAR TOF Altitude Hold
  • One-Key Inverted Flight: The E188 supports one-key inverted flight. Practice this feature outdoors in an open field with no or light wind.
    • Right dial two ticks to enter high rudder volume mode.
    • Dial down to enter manual mode.
    • (Over five meters high): Toggle right. Fly backwards.

    Note: The vehicle only opens to left and right rolls but not forward and backward rolls (the controls are the same for inverted and forward flights).

    Diagram illustrating the one-touch inverted flight mode, showing the helicopter flipping and remote control instructions for activating the mode.
    Figure 5.3: One-Touch Inverted Flight Mode
  • One-Touch Landing: For easy descent, even for novice pilots, use the one-touch landing feature. Press the designated button on the remote control to initiate a controlled landing.
    Image depicting the one-touch landing feature, showing the helicopter descending onto a landing pad and a close-up of the remote control's one-touch landing button.
    Figure 5.4: One-Touch Landing
  • Low Battery Alarm: The remote control provides bi-directional feedback, including a low battery alarm to alert you when the helicopter's battery is running low, allowing you to land safely.

5.3 Flight Environment

The E188 AirWolf features optical flow positioning for stable flight both indoors and outdoors. However, for optimal performance and safety, outdoor flight in open areas is recommended.

Image showing the E188 helicopter flying in both indoor and outdoor environments, illustrating its earth positioning and optical flow capabilities.
Figure 5.5: Indoor and Outdoor Optical Flow Positioning

6. Maintenance

6.1 General Care

  • Keep the helicopter clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Avoid exposing the helicopter to moisture or extreme temperatures.
  • Store the helicopter and remote control in a cool, dry place when not in use.

6.2 Blade Replacement

The package includes replacement main and tail blades. If blades become damaged, replace them promptly to ensure safe and stable flight.

  1. Use the provided screwdriver and hex key to carefully remove the damaged blades.
  2. Install the new blades, ensuring they are securely fastened and oriented correctly.
  3. The blades are made of nylon and carbon fiber composite materials, offering high strength and toughness.
Image detailing the Tail Motor 1206 5500KV, highlighting its brushless design and high temperature resistance, and the fuselage's hot runner injection molding process for toughness.
Figure 6.1: Tail Motor and Fuselage Construction

6.3 Battery Care

  • Always use the original USB charging cable for charging.
  • Do not overcharge or completely discharge the battery.
  • If storing for an extended period, charge the battery to approximately 50% capacity.
  • The modular battery design allows for easy replacement.

7. Troubleshooting

If you encounter issues with your E188 AirWolf, refer to the following common problems and solutions:

  • Helicopter does not respond to remote control:
    • Ensure both the helicopter and remote control are powered on.
    • Check if the remote control batteries are installed correctly and have sufficient charge.
    • Re-bind the remote control to the helicopter (refer to Section 4.3).
    • Ensure you are within the remote control distance (greater than 350 meters).
  • Unstable flight or drifting:
    • Ensure the helicopter's blades are not damaged and are installed correctly.
    • Calibrate the remote control rocker (toggle right button for calibration, refer to Section 4.3).
    • Ensure you are flying in an environment with minimal wind, especially for inverted flight.
    • Check for any obstructions in the optical flow or LiDAR TOF sensors.
  • Short flight time:
    • Ensure the battery is fully charged before each flight.
    • Battery performance can degrade over time; consider replacing old batteries.
    • Avoid continuous high-power maneuvers, which consume more battery.
  • Helicopter does not take off:
    • Check if the throttle is engaged and the helicopter is unlocked (Gas Pedal Unlock/Throttle Lock on remote).
    • Ensure the main blades are spinning freely and correctly.

8. User Tips

  • Practice in Open Spaces: Especially for beginners, start flying in large, open outdoor areas free from obstacles, people, and animals.
  • Monitor Battery Life: Pay attention to the low battery alarm from the remote control to ensure you land the helicopter safely before power runs out.
  • Gentle Controls: For smooth flight, especially when learning, use gentle and gradual movements on the control sticks.
  • Pre-Flight Check: Always perform a quick visual inspection before each flight: check blades for damage, ensure battery is secure, and verify remote control functionality.

9. Warranty and Support

9.1 Warranty Information

Please note that this product does not come with a manufacturer's warranty. Any claims regarding defects or issues should be directed to the seller immediately upon receipt of the product.

9.2 Customer Support

For any questions, technical assistance, or issues not covered in this manual, please contact the seller directly through your purchase platform. Provide your product model (E188 AirWolf) and a detailed description of the issue for faster resolution.

© 2024 EACHINE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.