Rastar Red Bull RB19

Contents

Rastar Red Bull RB19 RC Car Building Kit

Model: Red Bull RB19 | Brand: Rastar | Scale: 1:16

Introduction

This manual provides comprehensive instructions for assembling, operating, and maintaining your Rastar Red Bull RB19 RC Car Building Kit. This 1:16 scale model is a DIY kit that combines the fun of building with the excitement of remote control racing. Please read this manual carefully before beginning assembly or operation to ensure safe and optimal performance.

Safety Information

⚠️ WARNING: Not suitable for children under 36 months due to small parts. Choking hazard.

  • Always supervise children during assembly and operation.
  • Keep small parts out of reach of young children.
  • Do not operate the RC car near people, pets, or obstacles.
  • Ensure the operating area is clear of hazards.
  • Do not modify the product as it may lead to malfunction or injury.
  • Batteries are not included. Use appropriate batteries as specified.

Package Contents

Verify that all components are present in your kit:

Rastar Red Bull RB19 RC Car Building Kit box contents and assembled car
Figure 1: Overview of the kit box contents and the fully assembled Red Bull RB19 RC car.
DIY kit components and assembly process with a child
Figure 2: Detailed view of the DIY kit components, including plastic parts on sprues, remote control, and sticker sheet.
  • RC Car Body Parts (Unassembled Kit)
  • Remote Control Transmitter
  • Motor Assembly (Built-in)
  • Wheels and Tires
  • Sticker Sheet for Car Body
  • Instruction Manual (this document)
  • Other necessary fittings for assembly

Note: 3*AA batteries for the car and 2*AA batteries for the controller are NOT included and must be purchased separately.

Specifications

FeatureDetail
Brand NameRastar x Red Bull
Model Number92600
Scale1:16
Age Range14+ years (Recommended by manufacturer: 8+ years)
DescriptionR/C 1:16 Oracle Red Bull Racing RB19 Building Kit
PackagingWindow box
Vehicle Size (CM)35.1 x 12.9 x 7.6
Package Size (CM)43 x 28.5 x 8
ColourDark Blue
MaterialPlastic (High Quality ABS)
Remote Control2.4G Radio Control
Control Channels4 channels
Controller ModeMODE2
Remote DistanceAbout 20M
Speed3-4 km/h
Batteries Required3*AA for car, 2*AA for controller (Not included)
FunctionsForward, Reverse, Turn left, Turn right
Dimensions of the assembled Rastar Red Bull RB19 RC car
Figure 3: Physical dimensions of the Red Bull RB19 RC car (Length: 35.1cm / 13.82in, Width: 12.9cm / 5.08in, Height: 7.6cm / 2.99in).
Parameter details for Rastar Red Bull RB19 RC car
Figure 4: Detailed parameters including brand, model, age, scale, speed, material, color, product list, functions, and product use.

Assembly Instructions

Follow these steps to assemble your Rastar Red Bull RB19 RC Car. Refer to the included instruction manual for detailed diagrams.

Structure details and installation procedures for the RC car
Figure 5: Visual guide to the three main installation procedures: chassis assembly, body attachment, and sticker application.
  1. Step 1: Chassis Assembly (No.1 Installation Procedure)

    Begin by assembling the main chassis components. Carefully detach parts from the sprues and connect them according to the diagrams in the included manual. Ensure all connections are secure.

    Close-up of the car's internal structure and cockpit during assembly
    Figure 6: Focus on the internal structure and cockpit assembly.
    Top-down view of the car with wheels detached, showing assembly points
    Figure 7: Top view illustrating key assembly points before wheel attachment.
  2. Step 2: Body Attachment (No.2 Installation Procedure)

    Once the chassis is complete, attach the main body panels and aerodynamic components. Pay attention to the alignment of parts for a smooth finish.

    Side view of the car's wheels and detailed branding
    Figure 8: Side view showing wheel and tire details, which are attached during this stage.
  3. Step 3: Sticker Application (No.3 Installation Procedure)

    Apply the provided DIY stickers to the car body to complete the authentic Red Bull RB19 racing livery. Refer to the sticker placement guide for accurate application.

  4. Battery Installation

    Install 3 AA batteries into the car's battery compartment. Ensure correct polarity. Install 2 AA batteries into the remote control transmitter, also observing correct polarity.

Operating Instructions

Once assembled and batteries are installed, you are ready to operate your RC car.

Hand holding the 2.4G remote control for the RC car
Figure 9: The 2.4G remote control for operating the Red Bull RB19 RC car.
  1. Power On: Turn on the RC car using the power switch, then turn on the remote control. The remote and car should automatically pair (2.4G frequency).
  2. Controls:
    • Forward: Push the throttle stick forward.
    • Reverse: Pull the throttle stick backward.
    • Turn Left: Turn the steering wheel/stick left.
    • Turn Right: Turn the steering wheel/stick right.
  3. Driving Tips:
    • Start with slow movements to get a feel for the controls.
    • Avoid driving on wet surfaces or through puddles.
    • Do not drive into walls or hard objects at high speed.
  4. Power Off: Always turn off the RC car first, then the remote control, after use.

Maintenance

Regular maintenance will help prolong the life of your RC car.

  • Cleaning: Use a soft, dry cloth to wipe down the car after each use. Avoid using water or chemical cleaners.
  • Battery Care: Remove batteries from both the car and the remote control when not in use for extended periods to prevent leakage.
  • Storage: Store the car in a cool, dry place away from direct sunlight and extreme temperatures.
  • Inspection: Periodically check for loose screws or damaged parts. Replace any broken components promptly.

Troubleshooting

ProblemPossible CauseSolution
Car does not respond to remote.
  • Low or dead batteries in car or remote.
  • Car and remote not paired.
  • Out of range.
  • Replace batteries in both car and remote.
  • Ensure both are powered on and try re-pairing (power cycle both).
  • Bring the car closer to the remote (within 20M).
Car moves slowly or erratically.
  • Low batteries in the car.
  • Obstruction in wheels or drivetrain.
  • Replace car batteries.
  • Check and clear any debris from wheels and axles.
Steering is off-center.Steering trim not adjusted.Adjust the steering trim dial on the remote control until the car drives straight.

User Tips

  • Patience is Key: Assembling the kit can be a rewarding experience. Take your time with each step, especially when detaching small parts and applying stickers.
  • Sticker Application: For best results, use tweezers to apply the smaller stickers. Ensure the surface is clean and dry before application.
  • Battery Life: To maximize battery life, avoid continuous high-speed driving and turn off the car and remote when not in use.
  • Smooth Surfaces: The car performs best on smooth, flat surfaces. Avoid rough terrain to prevent damage to the wheels and chassis.

Warranty and Support

For any issues not covered in this manual, please contact the seller or manufacturer for support. Keep your purchase receipt as proof of purchase.

This product is designed for recreational use. Any unauthorized modifications or improper use will void the warranty.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.