PORTXVNSA NanoVNA-H4 Plus

Contents

PORTXVNSA NanoVNA-H4 Plus Vector Network Analyzer User Manual

Model: NanoVNA-H4 Plus

1. Introduction

The PORTXVNSA NanoVNA-H4 Plus is a portable handheld vector network analyzer (VNA) designed for precise measurement of reflection and transmission coefficients. This upgraded version features an extended measurement frequency range of 50KHz to 2.7GHz and an increased number of scanning points to 401, offering enhanced performance for various RF electronics and HAM radio applications.

PORTXVNSA NanoVNA-H4 Plus with accessories
Figure 1: NanoVNA-H4 Plus with included accessories.

Watch an overview of the NanoVNA-H4 Plus:

Video 1: Product overview of the NanoVNA-H4 Plus.

2. Safety Information and Warnings

▲ Warning:

  • Do not use the device in extreme environments such as areas with high temperature, high humidity, excessive dust, or flammable substances.
  • Avoid subjecting the product to severe impacts or vibrations, as this may cause damage.
  • Do not attempt to disassemble, modify, or repair this product yourself. Unauthorized modifications can lead to malfunction or injury.
  • Keep the device out of reach of children.

3. Package Contents

Upon unpacking, please verify that all accessories are complete. The standard package includes:

  • NanoVNA-H4 PLUS Host x1
  • USB Type-C cable x1
  • 15cm SMA male to male TG316 RF cable x2
  • SMA Male Calibration Kit OPEN x1
  • SMA Male Calibration Kit Short Circuit x1
  • SMA Male Calibration Kit LOAD x1
  • SMA female to female connector x1
  • Type-C to Type-C cable x1
  • Touch Pen x1
  • Pick x1
  • Optional: 32G memory card x1 (included with 'With 32G' variant)
NanoVNA-H4 Plus with accessories, no memory card
Figure 2: Standard package contents (without memory card).
NanoVNA-H4 Plus with accessories, including 32G memory card
Figure 3: Package contents including the optional 32G memory card.

4. Setup and Initial Use

Before first use, ensure the device is fully charged using the provided USB Type-C cable. The NanoVNA-H4 Plus features an ergonomic design with a large knob and a resistive touch screen for intuitive operation.

4.1 Powering On/Off

Locate the power button on the device. Press and hold to power on or off. The 4-inch IPS LCD display will illuminate, providing a wide viewing angle and accurate color reproduction.

4.2 PC Control via Nano Saver

The NanoVNA-H4 Plus can be connected to a PC for advanced control and data analysis using the Nano Saver software. This multiplatform tool allows you to save Touchstone files, sweep frequency spans in segments to gain more than 401 data points, and display/analyze the resulting data.

NanoVNA-H4 Plus connected to a laptop via Type-C for PC control
Figure 4: Connecting the NanoVNA-H4 Plus to a PC for control and data analysis.

5. Operating Instructions

The NanoVNA-H4 Plus is a versatile tool for various RF measurements. Use the touch screen with the provided touch pen or the large knob for navigation and parameter adjustment.

5.1 Key Functions and Applications

  • Scanning Antenna Systems and Cables: Analyze the performance of antennas and transmission lines.
  • SWR and Impedance Matching: Optimize antenna and circuit impedance for maximum power transfer.
  • Measuring Dual-band and Triple-band Duplexers: Characterize multi-band filters.
  • Port Isolation by Frequency Band: Evaluate isolation between different ports.
  • Measuring Insertion Loss of Filters: Determine signal loss through filters.
Collage of applications for the NanoVNA-H4 Plus, including antenna analysis and circuit testing
Figure 5: Various applications of the NanoVNA-H4 Plus for HAM radio and RF electronics.

5.2 Performing Measurements

The device supports a measurement range from 50KHz to 2.7GHz. Examples of measurements include:

  • Measuring a 2.4 GHz Antenna
  • Measuring Shortwave Antennas
  • Cable Length Measurement
Four examples of measurements: 2.7GHz range, 2.4GHz antenna, shortwave antenna, and cable length
Figure 6: Examples of measurements performed with the NanoVNA-H4 Plus.

5.3 Data Storage

The NanoVNA-H4 Plus supports an SD card (if included or purchased separately) to facilitate the storage of test data and exporting data for further analysis.

6. Care and Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning the exterior.
  • Avoid exposing the device to liquids.
  • Store the device in a cool, dry place when not in use.
  • Regularly charge the built-in 5000mAh battery to maintain its health, even if not in frequent use.

7. Troubleshooting

7.1 Frequently Asked Questions

Q: The device cannot be installed or recognized?
A: Check if the device model is compatible with your system and ensure there are no foreign objects obstructing the installation area or connectors.

8. Specifications

Feature Specification
Measurement Bandwidth / Frequency Range 50KHz-2.7GHz
Dynamic Range 80dB (50KHz-900MHz), 60dB (900MHz-1.5GHz), 50dB (1.5GHz-2.7GHz)
Reflection Coefficient (SWR) <1.1
Frequency Accuracy <0.5 ppm
Frequency Stability <2.5 ppm
Scan Points 401
Display 4-inch IPS LCD (resistive touch screen)
Battery Built-in 5000mAh rechargeable battery
Charging Port USB Type-C
Product Size 160mm x 92mm x 35mm
Semi-finished product No
Battery Included Yes (built-in)
High-concerned chemical None

9. User Tips

  • For optimal performance, always perform a calibration before critical measurements, especially when changing frequency ranges or connecting new components.
  • Utilize the PC control software (Nano Saver) for detailed analysis and saving complex measurement data, which can be more convenient than on-device review for intricate tasks.
  • Keep the touch screen clean to ensure sensitive and accurate touch response.

10. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for download and can be accessed here.

© 2024 PORTXVNSA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.