OBDMATE OM201

Contents

OBDMATE OM201 OBD2 Scanner User Manual

Your guide to effective vehicle diagnostics.

1. Introduction

The OBDMATE OM201 OBD2 Scanner is a practical entry-level option for basic car diagnostics. It is designed to help car owners quickly identify engine fault codes and save on repair costs. This tool supports all essential OBD2 functions, making it a valuable asset for DIY enthusiasts and professional mechanics alike.

This manual provides detailed instructions on how to safely and effectively use your OBDMATE OM201 OBD2 Scanner. Please read it thoroughly before operation.

2. Safety Precautions and Warnings

To avoid injury or damage to the vehicle and/or scan tool, please read this manual at first and observe the following safety precautions when working on a vehicle:

  • Always perform vehicle tests in a safe environment.
  • Do not attempt to operate or observe the unit while driving a vehicle. Operating or observing the device while driving may cause distraction and lead to fatal accidents.
  • Wear safety glasses that meet the standards of ANSI.
  • Keep your hair, hands, clothing, tools, and test equipment away from all moving or hot engine parts.
  • Operate the vehicle in a well-ventilated area: Exhaust fumes are toxic.
  • Place blocks in front of the drive wheels and never leave the vehicle unattended while performing tests.
  • Use extreme caution when working near the ignition coil, distributor cap, ignition wires and spark plugs. These components generate dangerous voltages when the engine is running.
  • Keep a fire extinguisher nearby that is suitable for gasoline, chemical, and electrical fires.
  • Keep the scan tool dry, clean, and free of oil/water or grease. If necessary, use a mild detergent on a clean cloth to clean the outside of the scan tool.

3. General Information

3.1 On-Board Diagnostics (OBD II)

The first generation of on-board diagnostics (OBD I) was developed by the California Air Resources Board (CARB) and introduced in 1988 to monitor some components of vehicle emission control. With the advancement of technology and the desire to improve the on-board diagnostic system, a new generation of on-board diagnostic system was developed, called "OBD II".

The OBD II system is designed to monitor emission control systems and major engine components by performing either continuous or periodic tests of specific components and vehicle conditions. When a problem is detected, the OBD II system turns on a warning light (MIL) on the vehicle's instrument panel to alert the driver, typically with the words "Check Engine" or "Service Engine Soon." The system also stores important information about the detected malfunction so a technician can accurately find and fix the problem. Below are three such valuable pieces of information:

  1. Whether the malfunction indicator lamp (MIL) is set to "On" or "Off";
  2. Whether diagnostic trouble codes (DTCs) are stored and if so, which ones;
  3. Status of the standby monitor.

3.2 Diagnostic Trouble Codes (DTCs)

OBD II Diagnostic Trouble Codes are codes stored by the on-board computer diagnostic system in response to a problem detected in the vehicle. These codes identify a specific problem area and are intended to give you an indication of where a fault may be occurring. OBD II Diagnostic Trouble Codes consist of a five-character alphanumeric code. The first character, a letter, indicates which control system sets the code. The other four characters, all numbers, provide additional information about where the DTC originated and the operating conditions triggered it.

Diagram illustrating the structure of a DTC code, showing system, code type, and sub-systems.
Figure 1: Explanation of a Diagnostic Trouble Code (DTC).

The DLC (Data Link Connector or Diagnostic Link Connector) is the standardized 16-pin connector used to connect diagnostic tools to the vehicle's on-board computer. The DLC is typically located 12 inches from the center of the instrument panel (dashboard), under or on the driver's side of most vehicles. If the DLC is not located under the dashboard, there should be a sticker indicating its location. On some Asian and European vehicles, the DLC is located behind the ashtray and the ashtray must be removed to access the connector. If you cannot find the DLC, check the vehicle's service manual to see where it is.

Diagram showing typical DLC locations in a car interior.
Figure 2: Typical location of the Data Link Connector (DLC).

4. Product Overview

4.1 Tool Description - OM201

Front view of the OBDMATE OM201 scanner showing its LCD display and control buttons.
Figure 3: OBDMATE OM201 Scanner.
  1. LCD DISPLAY - 128*64 pixel blacklit monochrome display for test results.
  2. [▲ UP] BUTTON - Scrolls upward through menu items.
  3. [ESC] BUTTON - Cancels current selection/action or returns to the previous menu.
  4. [OK] BUTTON - Confirms current selection/action.
  5. [▼ DOWN] BUTTON - Scrolls downward through menu items.
  6. OBDII CONNECTOR - Connects the scan tool to the vehicle's DLC.

4.2 Specifications

Feature Specification
Display 1.77" monochrome LCD (240*320 resolution)
Operating Temperature 0 to 50°C (32 to 140 °F)
Storage Temperature -20 to 70°C (-4 to 158 °F)
External Power Supply 8.0 to 18.0 V (Vehicle battery-powered)
Dimensions (L x W x H) 132x73x24 mm
Net Weight 0.219 kg
Communication Interface OBD-II
Free Update Period Lifetime
Supported Languages English, German, French, Dutch, Finnish, Spanish, Russian, Portuguese
Automotive Fit Type Universal fit
Wireless Support No

4.3 Packing List

  • OBDMATE OM201 OBD2 Scanner
  • USB-C Cable
  • User's Manual
Image showing the OBDMATE OM201 scanner, USB-C cable, and user manual in its packaging.
Figure 4: Package Contents.

5. Setup and Initial Configuration

5.1 Settings

The scan tool allows you to make the following adjustments and settings:

  1. Language: Select your preferred language (e.g., English, French, Spanish, etc.), then press [OK] to confirm.
  2. Contrast: Press [UP] to increase or [DOWN] to decrease display contrast.
  3. Unit of measurement: Choose between Imperial (e.g., mph, °F) or Metric (e.g., km/h, °C), then press [OK] to confirm.

5.2 Connecting to Vehicle

Four-step diagram showing how to connect the OBD2 scanner to a vehicle: turn off ignition, plug into DLC, turn on ignition, enter main menu.
Figure 5: Quick Connection Steps.
  1. Turn off the ignition.
  2. Plug the scan tool connector into the vehicle's 16-pin DLC.
  3. Turn on the ignition.
  4. Press any button to continue. It will display the device is connecting to the OBDII protocols.
  5. Press [ESC] to enter the main menu. Select "Diagnostics" and press [OK] to start a diagnosis.

6. Operating Instructions (OBD II Diagnostics)

Video 1: Product demonstration showing connection, reading/erasing codes, data stream, I/M readiness, battery test, printing, and language settings.

6.1 Read Codes

This function allows you to retrieve Diagnostic Trouble Codes (DTCs) from the vehicle's computer. Stored codes are also known as "hard codes" or "permanent codes" and indicate an emission-related fault. Pending codes are "mature codes" or "continuous monitor codes" that indicate a problem detected during the current or last driving cycle, but are not yet serious enough to trigger the MIL.

  1. From the diagnostic menu, select "Read Codes" and press [OK].
  2. Press [DOWN] to view the next code. Press [ESC] to return to the previous menu.
Screen showing 'Read Codes' function with various diagnostic icons.
Figure 6: Read Codes Function.

6.2 Erase Codes

This function clears all Diagnostic Trouble Codes (DTCs) and turns off the Malfunction Indicator Lamp (MIL).

  1. Select "Erase Codes" from the diagnostic menu.
  2. Confirm by selecting "YES" and pressing [OK].

Note:

  • Before performing this function, be sure to retrieve and record the error codes.
  • After clearing, retrieve the error codes again or turn on the ignition and retrieve the codes again. If there are still error codes in the system, please troubleshoot the codes using factory diagnostic guide, clear the codes and check them again.
Screen showing 'Clear Fault Codes' with a DTC lookup example.
Figure 7: Clear Fault Codes.

6.3 Live Data

The Live Data function displays real-time data from the vehicle's sensors.

  1. Select "Live Data" then press [OK] to enter.
  2. Select "View All Items" then press [OK] to check all live data.
  3. Press [UP] or [DOWN] keys to scroll through items, or turn the pages. Press [ESC] to return to the previous menu.
  4. To view live data curve, return to the "Live Data" menu first then select "View Graphic Items".
  5. Select the desired item and press [OK] to access its dynamic graph.
Graphic display of live data showing engine parameters like RPM, MAF, and coolant temperature.
Figure 8: Graphic Live Data Display.

6.4 View Freeze Frame

When an emission-related error occurs, the ECU automatically records a snapshot of the current vehicle's parameters (Freeze Frame data). This helps in diagnosing the conditions under which the fault occurred.

Note: If DTCs have been deleted, the freeze frame data may no longer be available.

  1. Select "View Freeze Frame" from the diagnostic menu and press [OK].

6.5 I/M Readiness

This function checks the readiness status of various emission-related monitoring systems to determine if the vehicle is ready for an emissions test.

  1. Select "I/M Readiness" from the diagnostic menu and press [OK].
  2. Press [UP] or [DOWN] to view more data.

Note: I/M readiness is to test misfire/fuel system/comprehensive component.

N/A means not available for this vehicle, INC means incomplete or not ready, OK means completed or monitor is ready.

Screen showing I/M Readiness status with green and red indicators for various systems.
Figure 9: One-Click I/M Readiness Test.

6.6 O2 Sensor Test

This function allows you to retrieve and display the O2 Sensor Monitor test results for the most recently performed tests from the ECU. OBD II regulations require vehicles to monitor and test oxygen (O2) sensors to detect problems related to fuel efficiency and vehicle emissions.

Note: The O2 sensor test function is not supported by vehicles that communicate via a Controller Area Network (CAN). The results of the O2 sensor test of vehicles with CAN can be found in the "On-Board Mon. Test".

  1. Select "O2 Sensor Test" in the Diagnostic Menu and press [OK] to enter.
  2. Press [OK], the screen will display the sensor data.
Image showing an O2 sensor test being performed on a car engine.
Figure 10: O2 Sensor Test.

6.7 On-Board Monitor Test

This function enables you to access the results of the on-board diagnostic monitoring for specific components.

  1. Select "On-Board Mon. Test" in the diagnostics menu and press [OK].
  2. Use the [UP] or [DOWN] keys to select an item then press [OK].
  3. Press [ESC] to return to the previous menu.

6.8 Vehicle Information

This function displays vehicle information such as VIN (vehicle identification number), CID (calibration number ID), and CVN (calibration check number).

  1. Select "Vehicle Infor" and press [OK] to enter.
  2. Press [ESC] to return to the previous menu.

6.9 EVAP Leak Test

The Evap function allows you to initiate a leak test for the vehicle's Evap system. The scanner signals the vehicle's on-board computer to start the test.

Note: Before using this function, please refer to the vehicle's repair manual for instructions on how to halt the test. Some vehicle manufacturers do not allow external devices to control the vehicle system.

  1. Select "Evap System Test" and press [OK].
Image showing an engine with text 'EVAP TEST' and explanation of its purpose.
Figure 11: EVAP Test.

6.10 DTC Lookup

The DTC Lookup feature enables searching for definitions of fault codes from the built-in code library (over 40,000 definitions).

  1. Select "DTC Lookup" in the main menu, then press [OK] to enter.
  2. To input a fault code, press [OK] + [UP] to move cursor left digit; press [OK] + [DOWN] to move cursor right digit. Then press [UP] or [DOWN] to enter a letter or number.
  3. Press [OK] to make a query.
  4. Press [ESC] key to return to the main menu.

Note: If the code definition is not found (SAE or manufacturer specific), the scan tool will display "DTC definition not found!". In such cases, please consult the vehicle's service manual for further reference.

6.11 QR-code Diagnostic Report Generation & Printing

This tool supports QR-code based diagnostic report generation and wireless printing. A complete vehicle diagnosis must be performed first.

  1. Select "Print" from the main menu, then press [OK] to enter.
  2. Select the data to print (e.g., Print DTC, Print Vin, Print Live Data, Print Freeze Frame), then press [OK] to enter.
  3. The tool displays a QR code. Scan it with a smartphone. A diagnostic report is automatically generated.
  4. Download the report to your phone's storage for further reference. You can review it at anytime and send the report to a PC for printing. No USB connection required.
Image showing the scanner displaying a QR code for wireless printing and a smartphone showing the diagnostic report.
Figure 12: Wireless Printing Feature.

7. Maintenance

7.1 Software Update

The OBDMATE OM201 scanner supports lifetime free software updates to ensure compatibility with new vehicle models and diagnostic protocols.

Four-step diagram showing how to update the scanner software: visit website, download, connect, unzip and update.
Figure 13: Easily Upgrade the Scanner.
  1. Visit the official OBDMATE website (www.obdmate.com/en) and go to the "Support" section.
  2. Download the software based on the model number (OM201).
  3. Connect the OM201 with your computer via the included USB-C cable.
  4. Unzip the software and click on the Update file. The upgrade should be completed within a minute.

Please note: The tool only supports Windows 11/10/8/7. Not for MacOS or Win XP. The tool will freeze if you download the wrong software. In this case, re-upgrade with the right software and it will be live again.

8. Troubleshooting

8.1 "LINKING ERROR!" Message

If the scanner displays "LINKING ERROR!" during connection:

  • Check if the OBDII connector of the tool is firmly connected to the vehicle's DLC.
  • Turn the ignition off and wait for about 10 seconds. Switch the ignition on again and repeat the test.

8.2 Persistent Diagnostic Trouble Codes

If Diagnostic Trouble Codes (DTCs) persist after being cleared, or if the Check Engine Light reappears shortly after clearing:

  • The underlying issue causing the code has not been resolved.
  • Consult your vehicle's service manual for detailed troubleshooting steps related to the specific DTCs.
  • Consider seeking professional assistance from a qualified mechanic.

9. User Tips

  • Language Setting: The scanner supports multiple languages, including Russian. While some translations might be clunky, the core functionality remains effective.
  • Core Functionality: This scanner is primarily for engine system checks. It can read and clear engine fault codes, view live data, and perform I/M readiness tests.
  • Limitations: The OBDMATE OM201/OM301 cannot test ABS, SRS (airbag), or any other non-engine systems. It also does not perform special functions beyond standard OBD2 diagnostics. Ensure you understand these limitations before use.
  • Compatibility Check: To avoid incompatibility issues, especially with older or specific vehicle models (e.g., Peugeot 206 1.4 75ch from 2000, JAC Frisson T8 diesel 2022, Jeep Renegade 1.3 petrol 2020, Volkswagen Transporter diesel 2002, BMW 1 Series E87, Mitsubishi Attrage), it is recommended to consult customer service with your car's make, model, and year before purchasing or if you encounter issues.
  • Battery Test: Utilize the battery test feature to quickly check your vehicle's battery health and starting system without needing additional tools or opening the hood. This can help prevent unexpected breakdowns.

10. Warranty and Support

10.1 Warranty

  • This warranty is valid solely for the original purchaser of OBDMATE products.
  • OBDMATE products are warranted against defects in materials and workmanship under normal use for one year (12 months) from the date of retail purchase.
  • For any product problems, we commit to providing a resolution within 24 hours.

10.2 Contact Us

For support or inquiries, please contact:

Manufacturer: AUTOPHIX TECH CO.,LTD

Address: Room 406, 403 and 402, Building 2, XiangRong Road No.8, Bujiuwo, Longping Community, Dalang Street, Longhua District, Shenzhen, Guangdong, China. 518000

© 2023 OBDMATE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.