1. Introduction
Thank you for choosing the A8 Wild Hunting Camera. This 4G LTE trail camera is designed for outdoor surveillance, wildlife monitoring, and security applications, offering live streaming capabilities, high-resolution imaging, and robust weather resistance. Equipped with a solar panel for extended battery life and 940nm no-glow infrared night vision, it provides reliable performance in various environments. This manual will guide you through the setup, operation, and maintenance of your camera.
2. Key Features
- 4G LTE Connectivity: Enables live stream viewing and remote access via mobile application.
- High-Capacity Battery: Powered by 6x 18650 batteries, offering up to 180 days of battery life with a total capacity of 15600mAh.
- Integrated Solar Panel: Provides continuous charging to extend operational time, especially useful in remote locations.
- IP66 Waterproof Rating: Ensures durability and reliable operation in harsh weather conditions.
- 940nm No-Glow Night Vision: Invisible infrared light for discreet monitoring without disturbing wildlife.
- Fast Trigger Speed: Ultra-sensitive detection with a rapid 0.3-0.5 second trigger time to capture fast-moving subjects.
- 14MP Image Resolution: Captures clear, high-definition photos and videos.
- Removable Battery Design: Enhances safety and simplifies battery replacement.
- Ucon App Support: For remote control, live viewing, and managing recordings.
3. Setup Guide
3.1. Battery Installation
The camera uses 6x 18650 rechargeable batteries. Ensure they are fully charged before installation.
- Open the camera's battery compartment.
- Insert the 18650 batteries according to the polarity markings.
- Close the battery compartment securely to maintain its waterproof seal.

3.2. SIM Card and TF Card Installation
The camera requires a 4G LTE SIM card for network connectivity and a TF (Micro SD) card for local storage of photos and videos.
- Locate the TF Card Slot and SIM Card Slot on the side of the camera.
- Insert the TF card into the TF Card Slot until it clicks into place.
- Insert the 4G LTE SIM card into the SIM Card Slot.

3.3. Solar Panel Installation
The solar panel helps maintain battery charge. Mount it in a location that receives ample sunlight.
- Attach the solar panel to the camera or a separate mounting point using the provided bracket.
- Adjust the angle of the solar panel to maximize sun exposure.
- Connect the solar panel cable to the camera's charging port.

3.4. Mounting the Camera
Securely mount the camera in your desired location, such as a tree or pole, using the included strap or mounting accessories.

4. Operating Instructions
4.1. Powering On/Off
Locate the 'Switch' on the side of the camera (refer to Figure 2). Slide the switch to the 'ON' position to power on the camera. Slide it to 'OFF' to power down.
4.2. Ucon App Setup and Live Stream
Download and install the 'Ucon' application on your smartphone. Follow the in-app instructions to add your A8 camera. Once connected, you can watch live video streams, adjust settings, and review recorded footage from anywhere.

4.3. Night Vision
The A8 camera features 940nm infrared night vision, which is invisible to animals. This allows for discreet monitoring in low-light conditions without startling wildlife.

4.4. Trigger Speed
The camera boasts an ultra-sensitive detection system with a fast trigger speed of 0.3 to 0.5 seconds, ensuring that fast-moving subjects are captured effectively.

5. Maintenance
5.1. Charging
The camera can be charged via its 'Charging Port' (refer to Figure 2). The integrated solar panel will continuously charge the batteries when exposed to sunlight. For initial setup or prolonged periods without sun, use a compatible charger to fully charge the 18650 batteries.
5.2. Waterproofing
The A8 camera has an IP66 waterproof rating. Ensure all ports and compartments are securely closed to maintain water resistance. Do not submerge the camera in water.
5.3. General Care
- Clean the lens and solar panel regularly with a soft, dry cloth to ensure optimal performance.
- Avoid exposing the camera to extreme temperatures outside its operating range.
- Periodically check the mounting strap for wear and tear.
6. Troubleshooting
- Camera not powering on: Check if batteries are correctly installed and charged. Ensure the power switch is in the 'ON' position.
- No network connection: Verify SIM card installation, check SIM card balance/data plan, and ensure good 4G LTE signal strength in the area.
- No live stream on app: Ensure the camera is powered on, has a stable 4G LTE connection, and is correctly paired with the Ucon app. Check app permissions on your phone.
- Poor image/video quality: Clean the camera lens. Ensure the camera is mounted stably to prevent vibrations. Check lighting conditions.
- Short battery life: Ensure the solar panel is clean and receiving adequate direct sunlight. Check battery health and consider replacing old batteries.
- Camera not detecting motion: Verify camera placement and sensitivity settings in the app. Ensure there are no obstructions in the detection zone.
- Camera unresponsive: Use the 'Reset Button' (refer to Figure 2) to perform a soft reset. If issues persist, remove and reinsert batteries.
7. Specifications
| Item | Value |
|---|---|
| Brand Name | YTYIN (also Jerderfo) |
| Model Number | A8 (also H2) |
| Place of Origin | Guangdong, China |
| Screen Size | None |
| Memory Card Type | SD Card (TF Card) |
| Optical Zoom | 4x |
| Image Stabilization | Yes |
| MegaPixel | 14MP |
| Special Feature | App Setting |
| Sensor Element Type | CMOS |
| APP | Ucon |
| Waterproof | IP66 |
| Color | Camouflage |
| Network | 4G LTE |
| Application 1 | Wireless |
| Application 2 | 4g trail camera with lithium battery |
| Feature 1 | Rechargeable trail camera |
| Feature 2 | Trail camera 18650 |
| Feature 3 | Trail camera 4g solar |
8. User Tips
- For optimal solar charging, position the solar panel facing south (in the Northern Hemisphere) or north (in the Southern Hemisphere) and ensure it is free from shade.
- Regularly check the Ucon app for firmware updates to ensure your camera has the latest features and performance improvements.
- When using the camera for security, consider placing it in a less obvious location while still ensuring a clear field of view.
- To conserve battery life, adjust the motion detection sensitivity and recording intervals in the app according to your specific monitoring needs.
9. Warranty and Support
For detailed warranty information and technical support, please refer to the official product page or contact the seller directly. You may also find additional information in the comprehensive user manual PDF available at: A8 Wild Hunting Camera User Manual (PDF).