1. Introduction
The HOTA D6 Pro is a high-performance, dual-channel smart charger designed for a wide range of battery types, including LiPo, Li-ion, LiFe, LiHv, NiMH, NiCd, and Lead Acid batteries. Featuring both AC and DC input capabilities, a clear HD display, and Bluetooth app control, it offers efficient and versatile charging solutions for hobbyists and professionals alike. This manual provides essential information for safe and effective operation of your HOTA D6 Pro charger.
Figure 1.1: HOTA D6 Pro Smart Charger (Front View)
2. Product Features
- Dual-Channel Output: Simultaneously charge two batteries independently.
- AC/DC Input: Flexible power options with AC 100-240V and DC 6.5-30V input.
- High Efficiency: Optimized charging algorithm with up to 94% efficiency.
- Wireless Charging: Integrated wireless charging pad for compatible mobile devices (e.g., iPhoneX, iPhone8, Samsung S8).
- Intelligent Upgrade: Built-in Micro USB connector for easy firmware updates.
- Multi-language Support: Simplified Chinese, Traditional Chinese, Japanese, English, and German.
- Comprehensive Protections: Includes temperature, time, capacity, input/output reverse polarity, overcurrent, overvoltage, short circuit, and overcharge protection.
- User-Friendly Interface: 2.8-inch 260,000 color HD screen with personalized menu design.
Figure 2.1: Overview of HOTA D6 Pro key features including intelligent upgrade, battery compatibility, and charging capabilities.
3. Setup and Connections
- Unpacking: Carefully remove the charger and all accessories from the packaging. Inspect for any damage.
- Power Connection:
- AC Input: Connect the provided AC power cord to the AC IN port (100-240V) on the rear of the charger and then to a suitable wall outlet.
- DC Input: Alternatively, connect a DC power source (6.5-30V) to the DC IN port on the rear of the charger. Ensure correct polarity.
- Battery Connection:
- Identify the main battery port (OUT) and the balance port for Channel 1 (Ch1) or Channel 2 (Ch2).
- Connect your battery's main discharge plug to the corresponding OUT port (e.g., XT60 connector).
- Connect the battery's balance lead to the appropriate balance port (e.g., 1-6S).
- Ensure all connections are secure and correct before proceeding.
- USB Output: The USB Port (5V / 2.1A) can be used for charging external devices.
- Update Port: The Micro USB port is for firmware updates.
Figure 3.1: Rear view of the HOTA D6 Pro showing AC IN (100-240V) and DC IN (6.5-30V) ports.
Figure 3.2: Close-up of a charging channel showing the balance port (Ch1) and main output port (OUT).
4. Operating Instructions
4.1 Basic Operation
- Power On: Connect the charger to a power source. The screen will light up.
- Navigation: Use the 'Speed Shuttle Key' (rotary dial) to navigate through menus and adjust settings. Press the dial to confirm selections.
- Channel Selection: Press the 'CH' button to switch between Channel 1 and Channel 2, or to view both channels simultaneously.
- Task/Setting: Use the 'Task' and 'Setting' buttons to access specific charging tasks or general charger settings.
4.2 Charging a Battery
- Connect Battery: Connect your battery to the desired channel (Ch1 or Ch2) as described in Section 3.
- Select Battery Type: Navigate to the 'Battery Type' setting and select the correct type (e.g., LiPo, Li-ion, NiMH).
- Select Charging Mode: Choose the appropriate mode (e.g., Charge, Balance Charge, Fast Charge, Storage, Discharge). For LiPo batteries, 'Balance Charge' is generally recommended.
- Set Parameters: Adjust the charge current (Amps) and cell count (S for LiPo/Li-ion) according to your battery's specifications.
- Start Charging: Confirm the settings and start the charging process. The charger will display real-time charging data.
- Monitor: Always monitor the charging process. Disconnect the battery if any abnormalities occur.
4.3 Wireless Charging
Place your Qi-compatible mobile device on the designated wireless charging pad on top of the charger. Ensure the device is centered for optimal charging. The charger must be powered on for wireless charging to function.
4.4 Bluetooth APP Control
The HOTA D6 Pro supports Bluetooth connectivity for control via a smartphone app. Download the official HOTA app from your device's app store. Pair your charger with the app to monitor charging status, adjust parameters, and perform firmware updates remotely.
5. Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the charger's exterior. Do not use solvents or abrasive cleaners.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Ventilation: Ensure the charger's cooling fan and vents are clear of obstructions during operation to prevent overheating.
- Firmware Updates: Regularly check for and install firmware updates via the Micro USB port or Bluetooth app to ensure optimal performance and compatibility.
- Cable Inspection: Periodically inspect all cables and connectors for wear or damage. Replace damaged components immediately.
6. Troubleshooting
- Charger Not Powering On:
- Check AC/DC power connections.
- Ensure the power source is providing the correct voltage.
- Charging Error Message:
- Verify battery type and cell count settings match the connected battery.
- Check battery connections for correct polarity and secure fit.
- Inspect battery for damage.
- Ensure balance lead is properly connected for balance charging.
- Wireless Charging Not Working:
- Ensure your device is Qi-compatible.
- Reposition the device on the charging pad to ensure proper alignment.
- Remove any thick cases from the mobile device.
- Bluetooth Connection Issues:
- Ensure Bluetooth is enabled on your smartphone.
- Restart both the charger and your smartphone.
- Ensure the HOTA app is up to date.
7. Specifications
Figure 7.1: HOTA D6 Pro port diagram and detailed specifications.
| Feature | Specification |
|---|---|
| Brand | Hota |
| Model NO. | D6 PRO |
| Input Voltage | AC100~240V / DC 6.5~30V |
| Charge Current | 0.1~15A × 2 |
| Charge Power | DC 325W × 2 (650W total) / AC 200W (with power distribution) |
| Discharge Power | Internal discharge: 15W × 2 (balance port 10W) / External discharge: 325W × 2 (650W total) |
| Battery Type Support | LiHv/LiPo/LiFe/Lilon/Lixx: 1~6S NiZn/Nicd/NiMH: 1~16S Smart Battery: 1~6S Lead Acid(Pb): 2~24V Enelop: 1~16S |
| Balance Current | 1600mA × 2 |
| Discharge Current | 0.1~3A × 2 |
| External Discharge Current | 1~15A × 2 |
| USB Output | 5V / 2.1A |
| Dimensions | 108 × 105 × 76mm |
| Net Weight | 555g |
Figure 7.2: The HOTA D6 Pro is compatible with various battery types including LiPo, Li-ion, NiMH, and Lead Acid.
8. Safety Information
- Always operate the charger in a well-ventilated area, away from flammable materials.
- Never leave charging batteries unattended.
- Ensure correct battery type, cell count, and charging current settings before starting any charging process. Incorrect settings can lead to battery damage or fire.
- Do not charge damaged or swollen batteries.
- Keep the charger away from water, moisture, and extreme temperatures.
- This product is for recreational use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
- The charger includes multiple protection features (reverse polarity, overcurrent, overtemperature, short circuit, etc.) to ensure safe operation.
9. User Tips
- For optimal battery health, use the 'Balance Charge' mode for LiPo/Li-ion batteries whenever possible.
- Consider using the 'Storage' mode for LiPo/Li-ion batteries that will not be used for an extended period to prolong their lifespan.
- Regularly check the charger's display for any warning messages or unusual readings during operation.
- Keep the firmware updated to benefit from the latest features and bug fixes.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official HOTA website or contact your authorized dealer. Keep your proof of purchase for warranty claims.