FUZRR FR2000+ Series

Contents

FUZRR FR2000+ Series Clamp Grounding Resistance Tester User Manual

Models: FR2000A+, FR2000B+, FR2000C+, FR2000+

1. Introduction

The FUZRR FR2000+ series clamp-on grounding resistance tester is a new-generation instrument designed for precise and convenient measurement of grounding resistance. It incorporates the latest LCD black screen backlight display and microprocessor technology, offering an Ω + A synchronous display for comprehensive readings.

This tester utilizes an inductive measurement method, allowing for quick and easy grounding resistance measurements without the need to disconnect the grounding lead-down line or use auxiliary electrodes, ensuring both safety and speed. It is widely applicable in various fields including telecommunications, power systems, meteorology, computer rooms, oil fields, power distribution lines, tower transmission lines, gas stations, factory grounding grids, and lightning protection systems. The instrument is characterized by its precise testing capabilities, fast operation, simplicity, stability, and reliability.

Controlled by a microprocessor, the FR2000+ series accurately detects both grounding resistance and leakage current. It employs advanced fast filtering technology to minimize interference from external sources. Additionally, it features an internal memory capable of storing up to 300 sets of measurement data for later review.

Four models of FUZRR clamp testers

Figure 1.1: FUZRR FR2000+ Series Clamp Grounding Resistance Testers (FR2000+, FR2000A+, FR2000B+, FR2000C+)

2. Product Features

  • Wide Measurement Range: Resistance range of 0-1200Ω and current range of 0-20A.
  • Advanced Display: New black screen design with high-end luxury feel, featuring Ω + A same-screen synchronous display.
  • Efficient Operation: Quick self-test function eliminates waiting times.
  • Robust Performance: Utilizes fast filtering technology for strong anti-interference ability.
  • Durable Design: New design with a long-life clamp head.
  • Data Management: Internal memory for storing 300 sets of measurement data.

3. Setup

3.1 Unpacking and Contents

Carefully unpack the instrument and check the contents against the packing list. Ensure all items are present and undamaged.

Product accessories including tester, calibration loops, batteries, carrying case, manual, and warranty

Figure 3.1: Standard Package Contents

Package Contents:

  • FUZRR FR2000+ Series Clamp Grounding Resistance Tester: 1 unit
  • Metal Carrying Case: 1 unit
  • AA Alkaline Dry Batteries: 4 pieces
  • Calibration Loop (1Ω and 10Ω): 1 set
  • User Manual & Warranty Certificate: 1 set

3.2 Battery Installation

The instrument is powered by 4 AA alkaline dry batteries (DC 6V). To install or replace batteries:

  1. Locate the battery compartment on the rear of the instrument.
  2. Open the battery compartment cover.
  3. Insert 4 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment cover securely.

The instrument features a real-time battery voltage display and will provide a low voltage reminder when batteries need replacement.

3.3 Instrument Overview

Diagram of the meter's structure with labeled components

Figure 3.2: Structure of the Meter

Key Components:

  • Clamp Jaw: Used to encircle the grounding conductor for measurement.
  • HOLD Key: Freezes the current display reading.
  • Trigger: Opens the clamp jaw.
  • LCD: Displays measurement readings, battery status, and other indicators.
  • POWER Key: Turns the instrument ON/OFF.
  • MODE Key: Cycles through different measurement modes (if applicable).
  • AL (Alarm) Function Key: Sets or activates the alarm function.
  • MEM (Memory) Key: Accesses stored data.
  • SET Key: Used for setting parameters or confirming selections.
  • Calibration Loops (1Ω, 10Ω): Used for instrument calibration and verification.

4. Operating Instructions

4.1 Power On/Off

Press the POWER key to turn the instrument on. The instrument will perform a quick self-test. To turn off, press the POWER key again. The instrument also features an automatic shutdown function (APO) after 5 minutes of inactivity to conserve battery life.

4.2 Basic Measurement

  1. Turn on the instrument.
  2. Open the clamp jaw by pressing the trigger.
  3. Encircle the grounding conductor with the clamp jaw, ensuring it is fully closed around the conductor.
  4. Read the grounding resistance (Ω) and current (A) values directly from the LCD. The instrument displays both simultaneously (Ω + A same screen display).
FR2000A+ tester showing Ω + A same screen display

Figure 4.1: Ω + A Same Screen Display

4.3 Data Hold

During measurement, press the HOLD key to freeze the current reading on the display. Press HOLD again to release and resume live measurement.

4.4 Data Storage (MEM)

The instrument can store up to 300 sets of measurement data.

  1. After a stable measurement is obtained, press the MEM key to save the data. The display will show a memory indicator (e.g.,

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.