1. Product Overview
The Mudi 7 (GL-E5800) is a portable 5G NR Wi-Fi 7 travel router designed for road warriors and business travelers. It provides reliable, private networks to secure data against cyber threats. Key features include 5G hyper-speed, dual SIM auto-switching (failover), and Wi-Fi 7 (320MHz channels and 4K QAM) for stable, fast connectivity, supporting fast downloads, 4K streaming, and lag-free video conferencing even in crowded areas.
Equipped with a touchscreen, the Mudi 7 allows you to monitor real-time data usage, signal strength, connected devices, and client speed, and adjust settings with simple taps for intuitive, hassle-free control.


2. Package Contents
The Mudi 7 (GL-E5800) package includes the following items:
- 1 x Mudi 7 (GL-E5800) Router
- 1 x Battery Pack (Pre-installed)
- 1 x User Manual
- 1 x 10Gbps USB-C Cable
- 1 x Travel Pouch

Unboxing Video
Watch the official unboxing video for a visual guide to the package contents:
3. Setup Instructions
3.1. Install SIM Card
The Mudi 7 supports both built-in eSIM and dual Nano-SIM cards. If you plan to use eSIM, you can skip this step. If using Nano-SIM cards, follow these steps:
- Remove the back cover of the Mudi 7.
- Take out the pre-installed battery.
- Insert your Nano-SIM card(s) into the designated slots. If using only one card, prioritize SIM 1.
- Reinsert the battery and replace the back cover.

3.2. Power On
To power on your Mudi 7, press and hold the Power button for 3 seconds. Alternatively, you can plug in a power adapter.

3.3. Basic Settings
Once powered on, follow the on-screen instructions on the touchscreen to configure basic settings. This includes setting a screen passcode, admin password, Wi-Fi name, Wi-Fi password, and frequency bands.
Tip:
- The default admin password is the last 9 characters of the device's S/N, followed by a '#' character. You may use this default password or set a custom one.
3.4. Internet Setup
The Mudi 7 supports various internet connection methods: Cellular (eSIM/Nano-SIM), Ethernet, Repeater, Tethering, and USB Ethernet. You can also utilize the Multi-WAN feature by setting up more than one internet connection.
3.4.1. eSIM Setup
- On the touchscreen, navigate to
Cellular>SIM Card Switch, then toggle the switch to enable eSIM. - Log in to the web Admin Panel. Go to
INTERNET>Cellular>eSIM Management. - In the pop-up window, click
Add eSIM Profile. - Upload your eSIM profile via a QR code or activation code, and click
Install. Note that most eSIM profiles can only be downloaded and added once. - Once uploaded, return to
Cellularand clickSIM Card Switch. - In the pop-up window, select
eSIMas the active SIM card, then clickApply. The router will then connect via the eSIM profile.
Note:
- The built-in eSIM and SIM 2 are mutually exclusive and cannot be activated at the same time. The eSIM is disabled by default. If you enable the eSIM, SIM 2 will not work even if a SIM card is inserted.
- Since Mudi 7 comes with a built-in eSIM, a SIMPoYo eSIM physical card will be recognized as a regular SIM card without eSIM functionality on Mudi 7.
3.4.2. Nano-SIM Setup
After installing the Nano-SIM card(s) as described in section 3.1, the router will automatically attempt to connect to the internet via the Nano-SIM card. Once successfully connected, the signal bars and cellular status will appear in the top right corner of the touchscreen. You can also check connection details on the web admin panel.
3.4.3. Ethernet Connection
- Connect Mudi 7's Ethernet port to an upstream network source (e.g., ISP modem, network switch, or Ethernet jack on the wall) using an Ethernet cable.
- On the touchscreen or web admin panel, go to
Network>Ethernet Ports, set the port role toWAN, and clickApply.

3.4.4. Repeater Mode
- On the touchscreen or web admin panel, go to
Internet>Repeaterand clickConnect. Mudi 7 will scan for available Wi-Fi networks. - Select the Wi-Fi network you want Mudi 7 to extend.
- Enter the password and click
Apply.

3.4.5. USB Tethering
- Connect your mobile device (e.g., smartphone or USB dongle) to Mudi 7's USB-C port via a USB cable.
- On your mobile device, go to
Settingsand enableUSB Tethering. If you use an iPhone, tapTrust This Deviceif prompted. - Mudi 7 will then automatically connect to your device. If it does not connect, repeat the above steps, or log in to the web admin panel and check the Tethering connection on the
INTERNETpage.

3.4.6. USB Ethernet
Mudi 7 is equipped with an OTG-enabled USB-C port, allowing you to add a second Ethernet port for Dual-Ethernet WAN. This requires a separately sold USB-C-to-Ethernet adapter.
- Connect an upstream network source (e.g., ISP modem, network switch, or Ethernet jack on the wall) to Mudi 7's USB-C port via a USB C-to-Ethernet adapter.
- On the touchscreen or web admin panel, go to
Network>Ethernet Ports>USB Ethernet Port, set the port role toWAN, and clickApply.
4. Operating Instructions
4.1. Touchscreen Interface
The 2.8" LCD touchscreen provides intuitive one-touch operation for various functions:
- Monitor real-time data usage and signal strength.
- View connected devices and client speeds.
- Quickly set up networks.
- Control VPN modes.
- Share Wi-Fi via QR code.
- Manage network settings directly without needing the web admin panel.

4.2. Web Admin Panel
The web Admin Panel offers comprehensive configuration and monitoring capabilities. To access it, connect a device (computer, laptop, or smartphone) to the Mudi 7 via Wi-Fi, an Ethernet cable, or a USB cable. Then, open a web browser and enter 192.168.8.1 in the address bar. Select your language, set your admin password, and click Apply.
4.2.1. Wireless Settings
Configure settings for the 6 GHz, 5 GHz, and 2.4 GHz Wi-Fi networks, including enabling Wi-Fi, setting TX power, specifying the Wi-Fi name (SSID), enabling randomized BSSID, selecting Wi-Fi security mode and password, configuring SSID visibility, choosing the Wi-Fi mode, bandwidth, and channel.
Note:
- Due to chipset hardware constraints, the 5 GHz and 6 GHz Wi-Fi cannot be enabled simultaneously.
- When Repeater is enabled, the Guest Network will be automatically disabled.
- As required by regulations, switch Wi-Fi to Outdoor mode when using it outdoors. This may reduce the coverage range. You can switch the Usage Environment (Indoor or Outdoor) at the top of the Wireless page.
4.2.2. Clients
The Clients page displays information about connected devices, including name, IP and MAC addresses, download and upload speeds, total traffic, and allows you to block clients or perform other actions.
4.2.3. Cloud Services
- GoodCloud: Provides an easy way to remotely access and manage GL.iNet routers.
- AstroWarp: An advanced networking platform for seamless remote networking and device management, supporting comprehensive device management across entire networks.
4.2.4. VPN
Mudi 7 supports both OpenVPN and WireGuard protocols for secure, encrypted traffic.
- OpenVPN: Offers strong security. You can set up an OpenVPN client or server.
- WireGuard: Offers great speeds and convenience. You can set up a WireGuard client or server.
4.2.5. Network Settings
- Multi-WAN: Allows multiple internet connections (Ethernet, repeater, tethering, cellular, USB Ethernet) simultaneously, with automatic failover.
- LAN: Manages the local area network for connected devices.
- Guest Network: Set up a separate network with specific security settings and AP isolation.
- DNS: Configure custom DNS servers, enable DNS rebinding attack protection, and manage DNS settings.
- Ethernet Port: Set the Ethernet port role (WAN/LAN), MAC mode, and view negotiated port rate.
- IPv6: Configure settings for Internet Protocol version 6.
- IGMP Snooping: Network optimization for multicast traffic.
- Network Mode: Configure the device as a Router, Access Point, or Extender. (WDS mode is not supported).
- Drop-in Gateway: Extends main router functionality (AdGuard Home, encrypted DNS, VPN client).
- Network Acceleration: Reduces CPU load and speeds up traffic forwarding.
- Parental Control: Manage and control children's devices, limiting screen time and restricting content.
4.2.6. Security Settings
- Port Forwarding: Allows remote servers and devices to access devices on a private network.
- Management Control: Configure security settings to protect against unauthorized access, including Local Access Control, Remote Access Control, and Open Ports on Router.
- NAT Mode: Enable or disable Full Cone NAT and SIP ALG functionality.
4.2.7. Applications
- Plug-ins: Add specific features or functionalities to enhance capabilities.
- Dynamic DNS: Automatically updates the IP address associated with a domain in real-time.
- Network Storage: Centralized data storage solution for sharing files over a network.
- AdGuard Home: Network-wide ad and tracker blocking solution.
- ZeroTier: Software-defined networking for secure, virtual networks.
- Tailscale: VPN service for accessing devices and applications anywhere.
- Tor: Privacy-focused network for anonymous communication.
4.2.8. System Settings
- Overview: Provides a snapshot of your router's current status and performance (CPU load, memory usage, LED control, flash usage, device info, external storage).
- Admin Password: Set or change the password for the administrative interface.
- Time Zone: Set the correct time zone for accurate task scheduling and logging.
- Log: Access various logs (System, Kernel, Crash, Cloud, Nginx) for troubleshooting and performance monitoring.
- Advanced Settings: Access OpenWrt LuCI interface for detailed network configurations, firewall settings, and other advanced system customizations.
5. Maintenance
5.1. Firmware Upgrade
Keeping your Mudi 7's firmware up-to-date ensures enhanced performance, security, and new features. You can upgrade via the Touchscreen or the web Admin Panel.
Before upgrading, please note:
- To retain your Mudi 7's configurations, select
Keep Settingson the upgrade page. - Do not select
Keep Settingswhen downgrading, as there may be compatibility issues. - Firmware upgrade requires a certain amount of data consumption. If your SIM card data plan is limited, it is recommended to connect the router to the Internet via other methods (such as Repeater, USB Tethering, etc.) to avoid extra data consumption.
5.1.1. Upgrade via Touchscreen
- Connect your Mudi 7 to the Internet.
- The system will automatically check for available firmware updates. If a new firmware is available, a prompt will pop up on the screen. In the pop-up prompt window, click
Go to Upgradeto proceed. - If the pop-up window does not appear, click
Moreon the home screen >About Device>Version & Upgrade>Download & Upgrade, then follow the on-screen instructions.
5.1.2. Upgrade via Web Admin Panel
- Online Upgrade: Log in to the web Admin Panel, and go to
SYSTEM>Upgrade>Firmware Online Upgradeto update your router's firmware. - Local Upgrade: Log in to the web Admin Panel, and go to
SYSTEM>Upgrade>Firmware Local Upgradeto update your router's firmware using a manually uploaded file.
5.2. Factory Reset
There are three ways to reset your Mudi 7: directly on the touchscreen, using the Reset button, and via the web Admin Panel.
Note:
- Before performing a reset, ensure Mudi 7 has fully booted up. Do NOT press the reset button immediately after power-up, as this may trigger U-Boot failsafe mode.
5.2.1. Reset via Touchscreen
- On the homepage, tap
More. - On the
Morepage, scroll down to the bottom and tapReset. - Tap
Resetagain to confirm. The router will start resetting and then reboot.
5.2.2. Reset via Button
- Remove the back cover to locate the reset button.
- Press and hold the reset button for 10 seconds, then release to perform a hard reset. This will clear all your settings.
Tip (Soft Reset):
If you want to restore network connectivity without performing a full factory reset, simply press and hold the reset button for 4 seconds and then release it to repair your network. This will restart the network interface while preserving your Wi-Fi settings, VPN configurations (disabled), and system settings.
- A soft reset restarts the device without erasing data, while a factory reset restores it to default settings and deletes all user data.
- If Wi-Fi has been disabled, a soft reset will restore Wi-Fi to its default enabled state.
- A soft reset can also be used to quickly switch the device from non-router mode to router mode.
5.2.3. Reset via Web Admin Panel
- Log in to the web Admin Panel, and go to
SYSTEM>Reset Firmware. - Click
Delete All and Reboot. The router will start resetting and then reboot.
6. Troubleshooting
- SIM Card Registration Issues: If you experience problems with SIM card registration, ensure your device's software is up-to-date. Many issues can be resolved with the latest firmware.
- Network Connectivity Problems: If you lose network connectivity, try performing a soft reset by holding the reset button for 4 seconds. This can often repair the network without losing your settings.
- Performance Degradation: If the router slows down or struggles to detect networks, check for available firmware updates. Regular updates often include performance improvements and bug fixes.
- Persistent Issues: For persistent or unresolvable issues, a factory reset (as described in section 5.2) can restore the router to its default state, which may resolve underlying problems.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | GL.iNet |
| Model | GL-E5800 (Mudi 7) |
| 5G Platform | Qualcomm Dragonwing MBB Gen 3 (X72) |
| CPU | Qualcomm, Quad-core @2.2GHz |
| Memory/Storage | LPDDR4X 2GB / 8GB eMMC |
| Protocol | IEEE 802.11a/b/g/n/ac/ax/be |
| Wireless Communication Standard | 802.11.ac |
| Wi-Fi Speed | 688Mbps (2.4GHz), 2882Mbps (5GHz), 5764Mbps (6GHz) |
| Wireless Transmission Rate | 5000M |
| Frequency Band Class | Tri-Band (2.4GHz, 5GHz, 6GHz) |
| Antenna Type | Internal (8 x Internal Antennas: 6 x cellular, 2 x 2.4GHz & 5GHz & 6GHz Wi-Fi) |
| External Antenna Ports | TS-9 (Left & Right) |
| Ethernet Speed | 100/1000/2500Mbps (2.5G Ethernet Port) |
| USB Ports | 2 x USB-C (10Gbps, USB 3.1, supports tethering & OTG) |
| SIM Support | 1 x Onboard eSIM, Dual Nano-SIM Card Slots |
| Built-in Battery | 3.85V/5380mAh/20.72Wh (Up to 13.5 hours runtime) |
| Power Input | USB PD/PPS 5-12V, 30W Max. |
| Power Consumption | <30W |
| Operating Temperature | 0 ~ 40°C (32 ~ 104°F) |
| Dimension / Weight | 157 x 75 x 22.8mm / 300g |
| Operating System | OpenWrt 22.03 on Linux Kernel 5.15 |
5G NR Bands (GL-E5800-NA)

5G NR Bands (GL-E5800-EU)

8. User Tips
- Keep Firmware Updated: Regularly check for and install the latest software updates. This can resolve issues like SIM card registration problems and improve overall performance and network detection.
- Utilize VPN Features: The Mudi 7 is highly functional when used with its built-in VPN capabilities (OpenVPN and WireGuard), offering enhanced privacy and security for your network.
- Explore Advanced Settings: Leverage the OpenWrt-based system for advanced customization and control over your network, including professional ad and tracker blocking.
- Consider External Antennas: If you are in an area with weak cellular coverage, the dual TS-9 external antenna ports allow for connecting external antennas to boost signal stability.
9. Support
For detailed instructions, advanced configurations, and further assistance, please refer to the official GL.iNet Mudi 7 (GL-E5800) User Manual PDF:
You can also visit the GL.iNet Official Store for product information and support resources.