1. Introduction
This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your Keychron Q11 Ultra 8K Split Wireless Custom Mechanical Keyboard. Please read this manual carefully before use to ensure optimal performance and longevity of your device.
For additional information and firmware updates, please visit launcher.keychron.com. A user manual in PDF format is also available for download: Keychron Q11 Ultra 8K User Manual (PDF).
2. Package Contents
Ensure all items are present in your package:
- 1x Fully Assembled Keyboard (Left and Right Halves)
- 1x Aluminum Case
- 1x PCB
- 1x Sound Absorbing Foam
- 1x IXPE Foam
- 1x PET Film
- 1x Latex Bottom Pad
- 1x Bottom Case Acoustic Foam
- 1x Bottom Case PET Film
- 1 set x Keycaps (PBT Double-shot)
- 1 set x Switches
- 1x Type-C Cable
- 1x Type-A to Type-C Adapter
- 1x Extension Adapter for Receiver
- 1x Type-A 2.4 GHz Receiver
- 1x Keycap & Switch Puller
- 1x Screwdriver

Illustration of the fully assembled keyboard and its components, including cables, receiver, and tools.
3. Setup
3.1. Connecting the Two Halves
- Set the power toggle on the right half of the keyboard to ON.
- Press and hold
fn1 + 7for 4 seconds on the right half to put it into pairing mode. - On the left half, set the mode toggle to BT (Bluetooth) or G (2.4 GHz Wireless), or connect the cable to activate it. The two halves will then connect automatically.
Note: The right half cannot be used independently and must be connected to the left half. When updating firmware, each half must be updated separately. The left half appears as "Q11 Ultra 8K", and the right half as "Q11 Ultra 8K R". All system switching, function settings, and lighting effects for the right half are controlled by the left half.

The split design allows for customizable positioning to reduce fatigue and enhance efficiency.
3.2. Connecting via Bluetooth
- Switch the mode toggle on the left half to the "BT" option to activate the keyboard.
- Hold
fn + 1(orfn + 2orfn + 3) for 4 seconds to activate Bluetooth pairing. The Bluetooth indicator will fast flash for 3 minutes. - Search for the Bluetooth device "Keychron Q11 Ultra 8K" on your device (computer, laptop, tablet, smartphone) and connect to it. The Bluetooth indicator will turn off after successful pairing.
Note: This keyboard supports pairing up to 3 devices simultaneously via key combinations fn + 1, fn + 2, and fn + 3. Slow or failed connections may occur due to different Bluetooth versions; ensure all settings are correct.
3.3. Connecting via 2.4 GHz Wireless
- Switch the mode toggle on the left half to the "G" option (2.4 GHz mode).
- Hold
fn + 4for 4 seconds on your keyboard to activate 2.4 GHz pairing status. - Connect the 2.4 GHz receiver to your device's USB / Type-C port. The keyboard will automatically connect.
For the best wireless experience, use the extension adapter for the receiver and place the 2.4 GHz receiver close to your keyboard to minimize latency and signal interference. Keep the keyboard within 20 cm of the receiver for optimal pairing.
3.4. Connecting via Wired Mode
- Switch the mode toggle on the left half to the "Cable" option.
- Connect the provided Type-C cable to your PC and the keyboard.
- The backlight will turn on.
Under Wired Mode, the keyboard will not enter Battery Saver Mode.

The keyboard supports ultra-fast 2.4GHz wireless, stable Bluetooth 5.3 (up to 3 devices), and Type-C wired connections.
3.5. Switching Operating System (OS)
Ensure the system toggle on the top left corner of the keyboard is switched to match your computer's operating system (Mac or Windows).

The keyboard comes with customized keycaps for both Windows and macOS systems, allowing for system-specific layouts.
4. Operation
4.1. Default Key Layouts
The keyboard features four layers of key settings:
- Layer 0 & 1: For Mac system.
- Layer 2 & 3: For Windows system.
If your system toggle is set to Mac, Layer 0 will be activated. If set to Windows, Layer 2 will be activated. When in Windows mode, make changes to Layer 2 instead of Layer 0.
Layer 0 (Mac)

Visual representation of the default key layout when the keyboard is switched to Mac (Layer 0).
Layer 1 (Mac, Fn/MO(1) activated)
This layer is activated when holding the fn/MO(1) key on Mac.
Layer 2 (Windows)
This layer is activated when the keyboard's system toggle is switched to Windows.
Layer 3 (Windows, Fn/MO(3) activated)
This layer is activated when holding the fn/MO(3) key on Windows.
4.2. Key Descriptions
| Key | Description | Key | Description | Key | Description |
|---|---|---|---|---|---|
| Scr- | Screen Brightness Decrease | RGB Md- | RGB Mode Previous | 2.4G | 2.4 GHz Host |
| Scr+ | Screen Brightness Increase | Hue+ | Hue Increase | Batt | Battery Life |
| Bright- | Backlight Decrease | Hue- | Hue Decrease | NKRO | N-Key Rollover |
| Bright+ | Backlight Increase | RGB SPI | RGB Speed Increase | ||
| Prvs | Previous | RGB SPD | RGB Speed Decrease | ||
| Play | Play/Pause | MO(1) | Layer 1 will be activated when holding this key | ||
| Next | Next | MO(3) | Layer 3 will be activated when holding this key | ||
| Mute | Mute | BTH1 | Bluetooth Host 1 | ||
| Vol- | Volume Decrease | BTH2 | Bluetooth Host 2 | ||
| Vol+ | Volume Increase | BTH3 | Bluetooth Host 3 | ||
| RGB Toggle | Turn Backlight on/off | Sat+ | Saturation Increase | ||
| RGB Md+ | RGB Mode Next | Sat- | Saturation Decrease |
4.3. Backlight Control
- Turn On/Off: Short-press
fn + tabor press the knob to turn the backlight on/off. - Change Lighting Effect: Press
fn + Q. - Increase Brightness: Short-press
fn + Wor rotate the knob clockwise while holdingfn. - Decrease Brightness: Short-press
fn + Sor rotate the knob counter-clockwise while holdingfn.

The keyboard features dynamic RGB backlighting with various customizable effects.
The Q11 Ultra offers 22+ RGB backlight settings, including a static white option. It supports Per-key RGB for individual key color customization and Mix RGB to split the keyboard into two custom lighting zones with unique effects.
4.4. Polling Rate
The default report rates for different modes are:
- 2.4 GHz: 1000 Hz
- Wired: 1000 Hz
- Bluetooth: 133 Hz
The polling rate is adjustable from 125Hz to 8000Hz in wired and 2.4 GHz modes, providing ultra-responsive performance.
Video demonstrating the Keychron Q11 Ultra 8K keyboard's features, including its high polling rate and split design.
4.5. LED Status Indicators
| Indicator | Function | Status |
|---|---|---|
| Power Indicator | Charging | Static Red (Charging), Static Green (Fully charged) |
| Bluetooth / 2.4 GHz Indicator | Connection Status | Fast Blinking (Reconnecting), Light Off (Paired), Slow Blinking (Pairing) |
| Caps Lock Indicator | Caps Lock | Static White (Enabled), Light Off (Disabled) |
5. Maintenance
5.1. Charging
Plug the Type-C cable into a USB port on your computer or a 5V 1A adapter, and the other end into the keyboard's Type-C port. The power indicator will show a static red light while charging. It will turn green when fully charged (approximately 2 hours).
*The Keychron Q11 Ultra 8K is compatible with all USB ports. For best performance and fastest charging, use a 5V 1A adapter or USB 3.0 port. The keyboard can be charged in 2.4 GHz/Cable/Bluetooth mode. This product supports up to 5V charging voltage and 1A charging current. Improper charging may cause issues.
5.2. Cleaning
To clean your keyboard, gently wipe the keycaps and case with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials. For deeper cleaning, you may remove the keycaps using the provided keycap puller.
6. Troubleshooting
6.1. Keyboard Not Pairing (Bluetooth)
- Confirm your device (computer/smartphone) is Bluetooth-capable.
- Restart your device and try pairing again.
- On Windows, new Bluetooth connections may require additional software updates. Wait at least 20 minutes after pairing before restarting your computer to ensure all updates are complete.
- Confirm your device is configured to accept Bluetooth connections (Windows) and supports an external keyboard (HID profile).
- Go to Bluetooth Devices > Open Settings and ensure:
- "Allow Bluetooth devices to find this computer" is enabled.
- "Allow Bluetooth devices to connect to this computer" is enabled.
- "Alert me when a Bluetooth device wants to connect" is enabled.
- If your keyboard isn't working in Bluetooth mode: Go to your device's Bluetooth settings, select the keyboard, and remove/delete/unpair it. Then restart your device and the keyboard.
6.2. Keyboard Not Working (2.4 GHz Mode)
- Ensure the mode toggle is set to 2.4 GHz.
- Remove the receiver from your device.
- Press
fn + 4for 4 seconds to force pair. - Reinsert the receiver into your device, keeping the keyboard within 20 cm of the receiver for optimal pairing.
6.3. Wireless Connection Interrupted (within 10 meters)
- Check if the keyboard is resting on a metal surface that can interfere with the wireless signal.
6.4. Multimedia Keys or Function Keys Not Working
- Functions of certain multimedia keys or function keys may be disabled due to compatibility issues with your operating system, its version, brand, or drivers. Ensure your operating system and drivers are up to date.
- Multimedia keys:
F1(Screen Brightness Decrease),F2(Screen Brightness Increase),F3(Mission Control/Task View),F4(Launchpad/File Explorer),F5(Bright-),F6(Bright+),F7(Prvs),F8(Play),F9(Next),F10(Mute),F11(Vol-),F12(Vol+).
6.5. Factory Reset & Firmware Update
Factory Reset:
- Power on your keyboard.
- Press and hold
fn + Space + Tfor 4 seconds. The keyboard backlight will flash red quickly for 3 seconds, indicating the keyboard has been reset.
Firmware Update:
- Visit launcher.keychron.com to open the online Launcher web app.
- Ensure the keyboard is in Cable or Wired mode and plug in the power cable.
- Find the 'Firmware Update' tab on the left side of the Launcher and connect your keyboard with it.
- Follow the instructions on the Launcher and complete the firmware update.
*Step-by-step guide, search the keyword "firmware" on keychron.com. The online Launcher requires the latest version of Chrome, Edge, or Opera browsers.

The Keychron Launcher web app allows for online customization of keymaps and firmware upgrades.
7. Specifications
7.1. Product Information
| Feature | Detail | Feature | Detail |
|---|---|---|---|
| Number of Keys | 89 Keys | Plate Material | PC |
| Size | 133.97 x 345.08 mm | Switch Type | Mechanical (Keychron Silk POM Switch) |
| Front Height (without keycaps) | 11.27 mm | Stabilizer | Screw-in PCB stabilizer |
| Back Height (without keycaps) | 17.83 mm | Backlight | South-facing RGB LED (MULTICOLOR) |
| Bottom Case Material | CNC Aluminum | Battery | 4000 mAh rechargeable li-polymer battery (2000mAh per half) |
| Feet Height | 1.24 mm | Charging Time | Approx. 2 hours per half |
| Angle | 2.8° | Compatible System | macOS/Windows/Linux |
| Weight | 1724g ± 10g | Operating Environment | -10 to 50°C |
| Body Material | CNC Aluminum | Charging Port | Type-C |
| Keycap Material | KSA double-shot PBT keycaps | Wireless Operating Distance | Within 10 meters (open space) |
| Keycup Printing | Doublshot | Bluetooth Device Name | Keychron Q11 Ultra 8K |
| Switches Hot Swap | Yes | Axis Body Brand | Keychron |
| Switches Manufacturer | GATERON | Certification | CE |
Technical specifications are subject to change without notice.
7.2. Performance
| Feature | Detail | Feature | Detail |
|---|---|---|---|
| Connectivity | 2.4 GHz / Bluetooth 5.3 / Wired | Wireless Working Time | Up to 300 hours (Backlit off), Up to 100 hours (RGB, lowest brightness) |
| Polling Rate | 8000 Hz / 2000 Hz / 1000 Hz (Adjustable) | Hot-Swappable | Yes (3-pin or 5-pin MX switches) |
| N-Key Rollover (NKRO) | Yes (wireless & wired) | Bluetooth Device Name | Keychron Q11 Ultra 8K |
7.3. Keychron Silk POM Switch Features

Detailed features of Keychron Silk POM Switches, including operating force, pre-travel, travel distance, operation life, behavior, pre-lubrication, sound level, and suitability.
8. User Tips
- Addressing Key Sticking: If you experience key sticking, try adjusting settings within the Keychron Launcher software. This can often resolve the issue.
- Customizing Layout: The keyboard is highly customizable. If you're used to a different layout, take advantage of the Keychron Launcher to remap keys and create shortcuts to suit your typing style and reduce typos.
- Switch Removal: When changing switches, use the included switch remover. Switches can be very tightly lodged into the metal plate.
- RGB LED Bugs: Some minor bugs with RGB LEDs might be present in the firmware. Check for updated firmware on the Keychron website.
- South-facing LEDs: Note that the LEDs are south-facing, which can affect how light shines through certain keycaps.
9. Warranty & Support
9.1. Warranty Policy
The Keychron Q11 Ultra 8K keyboard is highly customizable and designed to be easily rebuilt. If any component of the keyboard malfunctions during the warranty period, only the defective parts will be replaced, not the entire keyboard.

Official warranty statement.
9.2. Safety Precautions
- Keep the product, accessories, and packaging parts out of reach of children to prevent accidents and choking hazards.
- Always keep the product dry to avoid corrosion.
- Do not expose the product to extreme temperatures below -10°C (14°F) or above 50°C (122°F) to preserve the lifespan of the keyboard.
9.3. Contact & Support
Keychron, Inc.
Dover, DE 19901, United States
Find us at:
Website: https://www.keychron.com
Email: support@keychron.com
Social Media:
Facebook: @keychron
Instagram: @keychron
X (Twitter): @keychronMK
Designed by Keychron
Made in China