Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE Linux System CarPlay Screen. Please read this manual thoroughly before use to ensure proper functionality and safety.
Video: Product demonstration and overview.
Important Safety Information and Warnings
Please read all instructions carefully before installation and operation.
- Traffic Safety First: Do not watch videos or operate the machine while driving. Adjust volume to a level that allows you to hear outside sounds clearly.
- Safe Operation: If you encounter difficulties, park your car in a safe location before attempting to operate the system.
- Children: Do not allow children to operate the machine to prevent personal injury or damage.
- Traffic Rules: Always follow traffic rules when using navigation functions.
- Prohibited Areas: Do not use electronic equipment or open flames in prohibited areas (e.g., gas stations, wineries, strong electromagnetic interference areas) as this may cause danger.
- Professional Installation: Do not attempt to maintain, repair, or install the machine yourself, especially with power on. Installation or repair by untrained individuals is very dangerous and may cause damage or accidents. Consult a professional car audio sales shop.
- Environmental Conditions: Avoid placing the product in wet environments or near water to prevent electric shock or other damage. Do not install or store the machine in direct sunlight or near other hazardous substances.
- LCD Screen Care: Do not scratch the display with sharp objects or press it vigorously with hard objects, as this may damage the screen. If the LCD screen is near air conditioning ventilation, ensure cool and hot air does not blow directly onto the machine, as it may cause damage.
- Power System: This machine is suitable for a car 12V power system (must have a grounding wire). Do not install this equipment on a 24V car, as it will damage the machine.
- Short Circuit Prevention: To prevent short circuits, turn off the car and disconnect the connection between ACC and B+ before installation.
Compatibility
This MEKEDE Linux System CarPlay Screen is designed for specific BMW 3 and 5 Series models. Please verify your car's system (CCC or CIC) and LVDS connector type before installation.
Applicable Models and Years:
- BMW 5 Series E60 E61 E63 E64: 2004-2010 (Original CCC iDrive, 10-pin LVDS)
- BMW 5 Series E60 E61 E63 E64: 2004-2010 (Original CIC iDrive, 4-pin LVDS)
- BMW 3 Series E90 E91 E92: 2005-2012 (Original CCC iDrive, 10-pin LVDS)
- BMW 3 Series E90 E91 E92: 2005-2012 (Original CIC iDrive, 4-pin LVDS)

Image: Compatibility table for BMW CCC and CIC systems.

Image: Visual comparison of CCC and CIC system dashboards.
Note: Please confirm your original car's startup screen and LVDS cable type before purchasing. If you purchase the wrong version, it will not be compatible.
- Original 10-pin LVDS connector: Choose the CCC version.
- Original 4-pin LVDS connector: Choose the CIC version.

Image: LVDS connector types for CCC and CIC systems.
Setup and Installation
Product Accessories List:

Image: Included product accessories.
The package typically includes the 8.8-inch display unit, a power cable, an AUX cable, and a USB cable.
Wiring Connections:
Detailed wiring diagrams are provided for various BMW series and system types (EVO, NBT, CIC, CCC, NTG 5.0, NTG 4.5, NTG 4.0, A4/Q5). It is highly recommended that installation be performed by a professional.

Image: Comprehensive wiring diagrams for different vehicle series.
Note: To prevent short circuits, always turn off the car and disconnect the connection between ACC and B+ before beginning any wiring.
Sound Output Configuration (AUX Mode):
This unit outputs sound through the AUX input of your original car system. You must confirm that your car has an AUX function. If your car does not have an AUX input, you may need an FM transmitter to produce audio, though the sound quality may not be as good as a direct AUX connection.
To enable sound:
- Enter the original system menu.
- Navigate to "CD/Multimedia" -> "External devices" -> "AUX front".
- Ensure "AUX active" is selected and adjust the volume.

Image: Steps to set the original system to AUX mode.
If you experience no sound after installation:
- Connect the original car's fiber optic cable to the interface of the conversion line, then connect to the host.
- Connect "AUX" and switch the mode to "AUX".

Image: Solutions for no sound problem, including fiber optic and AUX connections.

Image: Audio connection details for NBT and CCC/CIC systems.
Operating Instructions
Main Menu and Navigation:
Upon startup, the original car interface will be displayed. Long press the original car MENU key to switch to the navigation interface. Touch the home icon to return to the main interface, and the back icon to return to the upper menu.

Image: Main menu interface after installation.
Dual System Switching:
The unit supports dual system free switching between the original car system and the Linux system. You can switch between the original system and the CarPlay menu freely with one button.

Image: Dual system switching between CarPlay and original car system.
Retained Original Car Functions:
After installing the MEKEDE screen, all original car functions remain operational, including:
- Original radio system
- Original CD function
- Steering wheel controls
- Original audio system
- Original reversing image
- i-Drive control

Image: Original car functions are retained.
CarPlay & Android Auto:
The unit features built-in Wireless/Wired CarPlay and Android Auto, allowing intelligent and safe use of your iPhone or Android device in your car. This enables navigation, calls, messages, and music playback while maintaining focus on driving.

Image: Wireless/Wired CarPlay and Android Auto in action.

Image: CarPlay interface.

Image: CarPlay features: Music, Map, and Phone.
Phone Mirrorlink (AirPlay/Miracast):
The system supports wireless/wired mirror link for both iOS and Android phones. This feature allows you to display your phone's screen on the unit, enabling you to use navigation apps, watch videos, or listen to music from your phone.
- Android Auto Wireless Connection Steps:
- Turn on Bluetooth and Wi-Fi on your Android phone.
- Search for and connect to the device "BTXXXX" via Bluetooth on your phone. The PIN code is: 0000.
- Android Auto Wired Connection Steps:
- Connect your Android phone to the device's dedicated USB port using an original or high-quality data cable.
- Miracast Connection Help:
- Open your Android phone and go to the system Settings screen.
- Find more connections and turn on the screen.
- Find Miracast and click to connect.
- Establish connection.

Image: Phone Mirrorlink for iOS and Android.
Bluetooth Function:
The built-in smart Bluetooth system supports mobile phone pairing, hands-free dialing, and steering wheel button control for calls and music, enhancing driving safety.
- Click "Bluetooth" on the main interface to enter the Bluetooth application.
- Once paired, all icons in the interface will light up, and Bluetooth icons will appear at the top.

Image: Bluetooth function for calls and music.
Media Playback (Film & Music):
Click "Movie" or "Music" on the main interface to access the video or audio playing interface. The unit supports AVI, MP4, RMVB, MP3, WAV, and MID formats from the system, external SD card, or USB.
- Double-click the screen to enter full-screen mode for videos. Touch any area to return to the operation interface.

Image: USB support for various media types.
GPS Navigation:
The unit includes a built-in global positioning system for omni-directional map display, real-time traffic conditions, and accurate positioning. It supports various navigation applications.

Image: GPS Navigation with supported apps.
Car Information Display:
The screen can display essential car information such as speed, fuel level, oil pressure, and safety warnings directly on the dashboard.

Image: Car information display.
UI Customization:
The unit offers personalized UI designs, integrating commonly used functions into the desktop and allowing you to switch between different styles. It also supports automatic switching between day and night modes to reduce visual fatigue.

Image: UI Collection and customization options.
Maintenance
OTA Updates:
The system supports firmware upgrades via OTA (Over-The-Air). Connect to Wi-Fi and remotely upgrade the application online to ensure your system is always up-to-date with the latest features and optimizations.

Image: OTA Update functionality.
Troubleshooting
Frequently Asked Questions:
- Problem: No response to key operation (protocol failure), abnormal display, flower screen.
Reason: Model setting is not correct.
Solution: Enter the factory Settings to set the correct model.
- Problem: No Bluetooth function.
Reason: There is no Bluetooth pairing and connection with the mobile phone.
Solution: Enter the Bluetooth Settings and check the machine name and password.
- Problem: No video display on the dashcam.
Reason: The type of dashcam is not chosen correctly.
Solution: In System Settings -> Factory Settings -> ARM related Settings -> Dashcam Settings, select the correct dashcam type.
- Problem: No display when reversing.
Reason: Wrong choice of reversing camera.
Solution: Enter the Settings inside the reversing Settings, choose the original car camera or rear-mounted camera.
- Problem: What if my original system doesn't show up?
Solution: Connect the original LVDS cable to the back connector of the Android radio.
- Problem: What should I do if the original system is flashing?
Solution: Input "Setting" -> "Personalized Setting" -> "Resolution ratio". The display screen of the original car should correspond to the option, otherwise the display will be poor.

Image: Steps to set the display resolution.
AHD Reversing Video:
The unit supports AHD rear-view video, providing clearer picture quality compared to ordinary cameras.

Image: AHD Reversing Video display.
Specifications
| Feature | Specification |
|---|---|
| System | Linux |
| CPU | T113 (Dual-core Cortex-A7) |
| RAM | 256MB |
| Display Size | 8.8-inch |
| Resolution | 1280*480P |
| Color Depth | 24bit |
| Touch Screen | Capacitive screen |
| WiFi | Dual mode 2.4G/5G, IEEE 802.11b/g/n |
| Bluetooth | Bluetooth V2.1 + EDR |
| Video Playing | 1080p@30fps/50Mbps (H.264) |
| USB Connector | 2 way, USB2.0 |
| Original Input | Built-in Analog input all the way |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Arabic, Polish, Danish, German, Russian, French, Korean, Dutch, Czech, Portuguese, Japanese, Swedish, Serbian, THAI, Turkish, Ukrainian, Greek, Spanish, Hungarian, Italian, English, Vietnamese |
| Working Voltage | DC 12V (Operating range: 9V~16V) |
| Maximum Working Current | 3A |
| Video Standard | NTSC, PAL (automatic recognition) |
| Video Input | 1VP-P(75 ohm) |
| Operating Temperature | -20°C ~ +70°C |
| Storage Temperature | -30°C ~ +85°C |
| Working Humidity | 45%-80% |
| Storage Humidity | 30%-90% |
| Special Features | WiFi function, Built-in GPS, Charger, Mobile Phone, MP3 players, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control |
| Digital Media Format | DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG |
| Certification | CE, FCC, RoHS, WEEE |
Warranty and Support
The product comes with a 3-year warranty.
For further assistance or technical support, please refer to the official MEKEDE support channels or contact your retailer.
A detailed user manual in PDF format is available for download: MEKEDE Linux System CarPlay Screen User Manual (PDF)
User Tips
- Always ensure your car's AUX input is correctly configured and selected for audio output from the unit.
- If experiencing display issues, double-check the LVDS cable connection and verify the resolution settings in the factory menu.
- Regularly check for OTA updates to benefit from the latest features and performance improvements.