1. Introduction and Overview
The Tugard G30 is an advanced WiFi and GSM dual-network home alarm system designed to provide comprehensive security for your property. This kit includes a main control panel, PIR motion sensors, door/window sensors, remote controls, and RFID tags, offering robust protection against intruders. It supports integration with popular smart home platforms such as Tuya, Smart Life, Amazon Alexa, and Google Assistant, allowing for convenient remote monitoring and control.
Key features include multi-user sharing, remote monitoring, motion detection, infrared night vision, 1080p video capture, two-way audio communication, an audible alarm, and options for video cloud storage or local TF card storage (not included). The system ensures continuous security even if internet connectivity is lost, thanks to its 2G GSM backup.



2. Setup Instructions
2.1 Wired Zones and Call Setup
Follow these steps to connect wired sensors and configure alarm calls:
- Plug the 4 wired cables (included in the package) into the Zone1, Zone2, Zone3 slots on the alarm system hub.
- Turn on the alarm system hub.
- Connect the window and door sensors with the other side cables via the small metal cable, referred to as a "Carbon-film resistor" (included in the package).
- To trigger the alarm system, separate the window and door sensor.
- Open the back cover of the hub and carefully pull up the cover of the chip.
- When inserting the SIM card, ensure the chip (the white connector at the bottom) is facing downwards and connected with the electronic mainboard. Press down the cover of the chip and confirm the SIM card is properly installed.
- Plug in the power adapter and turn on the alarm system. Verify that it is charging and has a signal.
- To set up alarm calls: Navigate to 'Menu' on the control panel, then select 'Phone'. Enter the desired phone number and toggle 'Phone ON/OFF' and 'SMS ON/OFF' as needed.
- Test the alarm system phone call to ensure it is connected correctly.
2.2 Sensor Installation
The system supports various sensors including PIR motion sensors and door/window sensors. For optimal performance, install sensors in strategic locations to cover entry points and high-traffic areas. Ensure sensors are within the wireless range of the main hub. The PIR motion sensor has a wide detection range of 110 degrees horizontally and 15 degrees vertically, covering up to 26-40 feet (8-12m).

2.3 Network Configuration
The G30 system utilizes both WiFi and 2G dual networks for continuous security. Ensure your WiFi network is stable for app control and notifications. The 2G network acts as a backup, providing security even if the internet is unavailable. The system is compatible with Tuya, Smart Life, Amazon Alexa, and Google Assistant for smart home integration.
3. Operating Instructions
3.1 Arming and Disarming Modes
The Tugard G30 system offers three security modes:
- Home Mode (Stay Arm): Disarms interior sensors while keeping exterior sensors armed. Ideal for when you are home but want perimeter protection.
- Away Mode (Exit Armed): Arms all sensors in your home, providing full protection when no one is present.
- Disarm Mode: Disarms all sensors, allowing free entry and exit from your home.

3.2 Timing Arm and Disarm
To avoid daily repeated operations, you can schedule specific times for arming and disarming the system via the mobile application. This feature allows the system to adapt to your daily routine, automatically switching between modes.

3.3 Renaming Sensors
The mobile application allows you to easily rename each door/motion sensor. This helps in distinguishing which sensor triggered an alarm, facilitating better management of each room and improving response efficiency.

3.4 Keyboard Lock
To prevent unauthorized access or accidental changes, you can enable the keyboard lock feature. In the configuration settings, click on "Switch" and set the keyboard lock status to "ON". The initial passwords are 1234 or 6666.

3.5 Two-Way Voice Intercom
The system supports two-way voice intercom, allowing you to communicate through the alarm panel. This feature can be useful for verifying alarms or communicating with individuals on-site.
3.6 Device Sharing
You can share access to your home alarm system with family members by adding their mobile phone numbers or email addresses through the mobile application. This allows multiple users to monitor and control the system.

4. Maintenance
- Cleaning: Regularly clean the surfaces of the control panel and sensors with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Battery Check: Periodically check the battery levels of wireless sensors and ensure the main hub is connected to a reliable power source.
- Tamper-Proof Device: The system includes a tamper-proof device that activates an alarm if there is malicious disassembly or vandalism. Ensure this feature is active and functioning.
- Software Updates: Keep the mobile application and system firmware updated to ensure optimal performance and access to the latest features.

5. Troubleshooting
- Alarm Not Triggering: Check if sensors are properly connected and within range. Ensure the system is armed in the correct mode. Verify SIM card is inserted correctly and has signal.
- No Phone Call/SMS Notifications: Confirm that the alarm call numbers are correctly configured in the system settings. Check the SIM card's signal strength and ensure it has an active plan for calls/SMS.
- False Alarms: Review sensor placement and sensitivity settings. Ensure door/window sensors are correctly aligned and motion sensors are not triggered by pets or environmental factors. Adjust entry/exit delays if needed.
- Connectivity Issues (WiFi/2G): For WiFi, ensure the hub is within range of your router and the network password is correct. For 2G, check the SIM card's signal and ensure it's active.
- Keyboard Unresponsive: Check if the keyboard lock is enabled. If so, enter the correct password (initial passwords are 1234 or 6666) to unlock.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | G30 |
| Brand Name | TUGARD |
| Kit Configuration | Door/Window Sensor (various kit sizes available) |
| Communication Interface | Wireless |
| Arming Type | APP |
| Video Interface | Yes |
| Display | Yes |
| Password Keyboard | Yes |
| Smart Home Platform | Alexa, Tuya, Google Assistant |
| Certification | CE, RoHS |
| Alarm Type | The Alarm, Apps Control, GPRS |
| Power Source | Corded Electric |
| Compatible Devices | Smartphone, PC, Tablet, Alexa, Google Assistant |
| Item Dimensions (Control Panel) | 18 x 11.4 x 2.2 centimetres |
| Video Capture Resolution (Camera) | 1080p |
| Connectivity Technology | Wireless |
| Installation Type | Screw-In |
| Alert Type | Movement, Input |
| Item Weight (Control Panel) | 700 Grams |
| Zone Number | 100 |
| Siren Volume | 100 dB |
| Wireless Transmission Range | 50-80 meters (164-262 feet) with obstacles, up to 100 meters (328 feet) without |
| Package Dimensions | 27 x 22 x 9 cm |
| Package Weight | 1.384 kg |
7. User Tips
- For optimal performance, ensure all sensors are within the specified wireless range of the main hub.
- Regularly test your alarm system (e.g., once a month) to ensure all components are functioning correctly and that emergency calls/SMS are being sent.
- Utilize the app's scheduling feature for automated arming and disarming to fit your daily routine and enhance convenience.
- When installing door/window sensors, ensure the two parts are aligned correctly and close enough for proper detection.
- Consider placing motion sensors in corners of rooms for wider coverage and to minimize blind spots.
8. Warranty and Support
The Tugard G30 Home Alarm System comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your product or contact the seller directly. For technical support, troubleshooting assistance, or general inquiries, please visit the manufacturer's official website or contact their customer service. Keep your purchase receipt as proof of purchase for any warranty claims.
Please note that free returns are available within 90 days of purchase. For more details on return procedures, please consult the seller's return policy.