1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE Linux Car Multimedia Screen. This system is designed to enhance your driving experience with features like Wireless CarPlay, Android Auto, GPS navigation, and multimedia playback, while seamlessly integrating with your vehicle's original functions.
Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Compatibility
This multimedia screen is compatible with specific Mercedes-Benz models and NTG systems. Please verify your vehicle's compatibility before proceeding with installation.
2.1. Compatible Car Models & Years
- For Mercedes Benz C-Class W205: 2015-2018 (NTG5.0)
- For Mercedes Benz V-Class W446: 2016-2018 (NTG5.0)
- For Mercedes Benz V-Class W447: 2016-2018 (NTG5.0)
- For Mercedes Benz GLC-Class X253: 2016-2018 (NTG5.0)
Important Note: Not compatible with NTG 5.5 system.


2.2. NTG System Identification
To identify your NTG system, observe the button layout on your car's console:
- NTG 4.5: Features a "CLEAR" button.
- NTG 5.0: Features a "FLAT" button.


3. Package Contents
Please check the package for the following items:
- MEKEDE Linux Car Multimedia Screen (10.25-inch or 12.5-inch, 1920*720 resolution)
- Power Cable
- AUX Cable
- LVDS Cable
- USB Cable (for NTG 5.0 audio output)

4. Setup and Installation
Professional installation is recommended. Ensure the vehicle's power is off before beginning installation.
4.1. General Installation Overview
The new multimedia screen replaces your original car display. The installation process involves connecting the provided cables to the existing car harness and the new screen.

4.2. Wiring Instructions
Follow the wiring diagram carefully for correct connections.

4.2.1. Audio Output Connection
- For NTG 4.0 and NTG 4.5: If your car has an "AUX IN" hole, use the "Audio out" cable from the Android ISO power cable to plug into the AUX IN hole to get sound. If there is an "AMI" port, use the "Audio Out" wire on top of the Android ISO power cord to plug into the AMI cable and then into the car's AMI port.
- For NTG 5.0: Audio is transmitted via the USB port. Use the provided USB adapter.
Note: If there is no AUX or AMI on your car (NTG 4.0/4.5), you may need an FM transmitter for audio, but the sound quality will not be as good as AUX or AMI.

4.2.2. Reversing Camera Wiring (Optional)
If you are installing an aftermarket reversing camera, follow this diagram:

5. Operating Instructions
The MEKEDE multimedia screen offers a dual-system experience, allowing you to switch between the original car system and the Linux system with ease.
5.1. Dual System Switching
The original car system and the Linux system can be switched freely by one button. This ensures that all original car functions remain operational.


5.2. Wireless CarPlay & Android Auto
Connect your smartphone wirelessly or via USB to access CarPlay or Android Auto. This allows for intelligent and safe use of phone features while driving.
- Wireless Connection: Via Bluetooth and Wi-Fi on your iPhone or Android phone.
- Features: Navigation, calls, messages, music, and other compatible apps.


5.3. Phone Mirrorlink
The system supports wireless/wired mirror link for both iOS and Android phones. This feature allows you to display your phone's screen on the multimedia unit, enabling you to use navigation apps, watch videos, or listen to music directly from your phone.

5.4. GPS Navigation
The unit features a built-in global positioning system for omni-directional map display. It supports synchronous display of real-time traffic conditions, providing rapid and accurate positioning. Compatible with various navigation applications.

5.5. Bluetooth Functionality
The intelligent Bluetooth system supports mobile phone pairing, hands-free dialing, and steering wheel button control for calls. It also allows for Bluetooth music streaming and contact synchronization, ensuring driving safety.

5.6. Multimedia Playback (USB)
The system supports Android multimedia players, allowing you to play music, movies, and view photos via USB connection. It supports two USB 2.0 connections.

5.7. Car Information Display
The screen can display important car information such as engine speed, fuel level, oil pressure, and various safety warnings directly on the dashboard interface.

5.8. User Interface (UI) Customization
The personalized UI design integrates commonly used functions into the desktop and allows you to switch between different styles. It also supports automatic switching between day and night modes to reduce visual fatigue.

Video 5.1: Product demonstration showcasing UI, Bluetooth, video playback, settings, CarPlay, Android Auto, Mirrorlink, and EQ adjustments.
6. Maintenance
6.1. Software Updates (OTA)
The system supports Over-The-Air (OTA) firmware upgrades. Connect to Wi-Fi to remotely upgrade the system and applications online, ensuring you always have the latest features and improvements.

6.2. Cleaning the Screen
Use a soft, lint-free cloth to clean the screen. Do not use abrasive cleaners or solvents, as they may damage the display.
7. Troubleshooting
7.1. Original System Display Issues
Symptom: Original system does not show up or is flashing.
Solution:
- Ensure the stock LVDS cable is correctly connected to the Android back connector.
- Go to "Settings" -> "Personalized Setting" -> "Resolution ratio" and adjust the resolution to match your original car's display screen. Incorrect resolution settings can lead to poor display quality.

7.2. No Audio Output
Refer to Section 4.2.1 for correct audio output connections based on your NTG system. Ensure all audio cables are securely connected.
7.3. Wireless CarPlay/Android Auto Connection Issues
Wireless CarPlay Connection Steps:
- Turn on Bluetooth and Wi-Fi on your iPhone.
- Search and connect to the device "BTXXXX" via Bluetooth on your phone. The PIN code is 0000.
- Once paired successfully, a pop-up window will appear on your phone. Tap "Use CarPlay".
Troubleshooting Steps for Connection Issues:
- Delete the paired car Bluetooth record on your phone.
- Go to the car's Bluetooth settings and delete the paired phone record.
- Restart both your car and phone, then reconnect.
8. Specifications
| Feature | Specification |
|---|---|
| System | Linux |
| Chipset | T113 (Dual-core Cortex-A7) |
| RAM | 256MB |
| Display Size | 10.25-inch, 12.5-inch |
| Resolution | 1920*720 |
| Color Depth | 24bit |
| Touch Screen | Capacitive screen |
| Wi-Fi | Dual mode 2.4G/5G, IEEE 802.11b/g/n |
| Bluetooth | Bluetooth V2.1 + EDR |
| Video Playing | 1080p@30fps (H.264), 50Mbps (MPEG-4), 1080p@30fps (VP8), 1080p@30fps (H.263), 1080p@30fps (DIVX4), 1080p@30fps (DIVX5), 1080p@30fps (DIVX6), 1080p@30fps (SVID), 1080p@30fps (MPEG-2), 720p@30fps (VP9) |
| USB Connector | 2-way, USB 2.0 |
| Original Car Input | Built-in Analog input all the way |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Arabic, Polish, Danish, German, Russian, French, Korean, Dutch, Czech, Portuguese, Japanese, Thai, Ukrainian, Greek, Spanish, Hungarian, Italian, English, Vietnamese |
| Out Power | 45W |
| Voltage | 12 V |
| Warranty | 3 year |
| Certification | CE, FCC, RoHS, WEEE |

9. User Tips
- For optimal audio quality, always use the AUX or AMI connection if available for NTG 4.0/4.5 systems. For NTG 5.0, ensure the USB audio output is correctly configured.
- Regularly check for OTA updates to keep your system running smoothly and access new features.
- When experiencing display issues, first verify cable connections before adjusting resolution settings.
10. Warranty and Support
This product comes with a 3-year warranty.
For further assistance, detailed guides, or troubleshooting not covered in this manual, please refer to the official user manual PDF available online: User Manual (PDF).