KEYDIY KD-X2

Contents

KEYDIY KD-X2 Auto Key Programmer User Manual

Model: KD-X2

1. Introduction

The KEYDIY KD-X2 is a versatile multi-function auto key programmer designed for locksmiths and automotive professionals. It combines the capabilities of a key cloner, transponder reader/writer, frequency tester, and remote generator into a compact and powerful device. This manual provides detailed instructions for setting up, operating, and maintaining your KD-X2 device. The device interface and app are available in English.

KEYDIY KD-X2 device with three remote keys and various cables
Figure 1: KEYDIY KD-X2 Auto Key Programmer with included accessories and remote keys.
Video 1: Official product video showcasing the NEAI brand logo.

2. Specifications

FeatureDetail
BrandKEYDIY (NEAI)
ModelKD-X2
OEM NO.KD-X2
CertificationCE
OriginMainland China
Power Supply2600mAh Lithium Battery
Charging MethodUSB 5V/1A
Display Screen0.91 inch OLED
ConnectivityBluetooth BLE4.0 (Mobile App), USB-B (PC), OTG (iOS/Android)
InterfacePS-2 for connecting remotes
Dimensions (L x W x H)25 cm x 21 cm x 6 cm
Weight0.773 kg

Key Functions:

  • Wired Generation
  • Wireless Generation
  • Mobile Phone Simulation
  • Garage Door Generation
  • Proximity Key Unlock
  • Frequency Detection
  • Infrared Detection
  • Access Card Copy
  • Fixed Code Remote Copy
  • Online HCS Remote Copy
  • Online Chip Copy (96 bit 48chip, 46chip, 4Dchip, Toyota chip etc.)
  • Chip Generation
  • Chip Editing
  • Chip Simulation
  • Ignition Coil Detection
  • Remote Data Backup
  • Transponder Chip Identification
  • Remote Identification
  • Free Activation of 96 Bits 48 Transponder Copy (No Token Required)

3. Setup and Initial Use

3.1 Powering On/Off

  • Power ON: Press and hold the red side button of the KD-X2 for 2 seconds. The screen will display "KEYDIY" and the indicator light will blink.
  • Power OFF: Press and hold the red side button of the KD-X2 until no words show on the screen. If no operation is performed for 5 minutes, the device will automatically shut down.
Front, side, and back views of the KEYDIY KD-X2 device
Figure 2: Front, side, and back views of the KD-X2 device, showing the power button on the side.
Side view of the KEYDIY KD-X2 showing USB-B and PS-2 ports
Figure 3: Side view of the KD-X2, illustrating the USB-B and PS-2 ports for connectivity.

3.2 Battery Installation

The KD-X2 uses a 2600mAh lithium battery. To install or replace the battery:

  1. Carefully open the battery compartment cover on the back of the device.
  2. Insert the battery, ensuring correct polarity.
  3. Close the battery compartment cover securely.
KEYDIY KD-X2 with open battery compartment and battery
Figure 4: KD-X2 with its battery compartment open, showing the battery and internal components.

3.3 Mobile App Connection and Pairing

The KD-X2 works with the Mobile KD App via Bluetooth. Follow these steps for initial setup:

  1. Scan the QR code on the back of the device to download the Mobile KD App, or search for "Mobile KD" in your app store.
  2. Ensure Bluetooth is enabled on your mobile phone and the KD-X2 is powered on.
  3. In the Mobile KD App, click "Bluetooth Settings" on the first page.
  4. Click "Click to Search" to find available KD devices. Make sure your KD equipment is in the awakened state and close to your phone.
  5. Once "KD-X2" is found in the list, click the "Pair" button. The default password "KEYDIY" will pop up. Click "OK" to successfully pair the device.
Screenshots of Mobile KD App showing Bluetooth settings and device search
Figure 5: Mobile KD App interface for Bluetooth settings and searching for the KD-X2 device.
Screenshots of Mobile KD App showing Bluetooth pairing with 'KEYDIY' passcode
Figure 6: Mobile KD App Bluetooth pairing process, including entering the default passcode "KEYDIY".

3.4 Firmware and Remote Data Updates

After pairing, it is crucial to upgrade your device firmware and remote data.

  1. Firmware Upgrade: Click "Update" on the first page of the Mobile KD App, then click "Upgrade KD device" to update the firmware. Follow the on-screen instructions. Do not close the interface during the update process. If the update fails, reconnect the device manually or use the KD PC software for the update.
  2. Remote Data Update: Click "Update" on the first page of the Mobile KD App, then click "Online Updates" to update the remote data. Follow the on-screen instructions.
Screenshots of Mobile KD App showing firmware update process
Figure 7: Mobile KD App firmware update interface, showing current and latest versions, and the "Start Update" button.
Screenshots of Mobile KD App showing remote data update process
Figure 8: Mobile KD App remote data update interface, with "Online Updates" option highlighted.

4. Operating Instructions

4.1 Chip Identification

To identify the type of a transponder chip:

  1. Place the chip you want to identify into the chip slot on the KD-X2 device.
  2. Press the "Chip Identification" shortcut button.
  3. The OLED screen will display the chip type and relevant information (e.g., "48 Unlock Clone", "4A Chip Identification", "10 T5 Chip Identification", "4C Clone", "46 Unlock Clone").
KD-X2 display showing '48 Unlock Clone' during chip identification
Figure 9: KD-X2 display showing identification of a "48 Unlock Clone" chip.
KD-X2 display showing '4A Chip Identification'
Figure 10: KD-X2 display showing identification of a "4A Chip".
KD-X2 display showing '10 T5 Chip Identification'
Figure 11: KD-X2 display showing identification of a "10 T5" chip.
KD-X2 display showing '4C Clone' chip identification
Figure 12: KD-X2 display showing identification of a "4C Clone" chip.
KD-X2 display showing '46 Unlock Clone' chip identification
Figure 13: KD-X2 display showing identification of a "46 Unlock Clone" chip.

4.2 Transponder Cloning

The KD-X2 supports cloning for a wide range of transponders, including 4D/4C/46/11/12/13/33, ID48 (96 Bit), Fixed code (T5), Texas TX 4C, Texas Crypto TX/CR 4D, Philips Crypto PH/CR 46, Toyota 80 Bit, and Megamos Crypto. The built-in snoop device assists with ID46 and ID48 cloning.

For ID48 (96bit) cloning, 150 KD Coins are required per use. KD Coins can be earned by generating "B" and "NB" remotes (20 KD Coins for the first generation of a "B" Remote, 10 KD Coins for the first generation of an "NB" Remote) or purchased separately.

4.3 Remote Generation

The device supports both wired and wireless remote generation. Connect the remote to the PS-2 interface if using wired generation, or follow the app instructions for wireless generation.

4.4 Frequency Detection

Use the "Frequency Detection" shortcut button to check a remote's frequency and identify its type (ASK/FSK). This also helps verify if remote buttons are functioning correctly.

4.5 Other Functions

The KD-X2 offers numerous other functions accessible via the Mobile KD App or PC software:

  • Mobile Phone Simulation
  • Garage Door Generation
  • Proximity Key Unlock
  • Infrared Detection
  • Access Card Copy
  • Fixed Code Remote Copy
  • Online HCS Remote Copy
  • Online Chip Copy (96 bit 48chip, 46chip, 4Dchip, Toyota chip etc.)
  • Chip Generation, Editing, and Simulation
  • Ignition Coil Detection (to check if the car is sending a signal)
  • Remote Data Backup

5. Maintenance

5.1 Software Updates

Regularly update the Mobile KD App, device firmware, and remote data to ensure optimal performance and access to new features. Updates are free and continuous.

  • New versions (e.g., v5.0.0) include improvements to remote data service, stability of remote upgrades, downloading speed, KD-coins generation, and garage door remote support.

5.2 Battery Care

The device is powered by a 2600mAh lithium battery. Charge it using a USB 5V/1A power source. Avoid overcharging or completely draining the battery to prolong its lifespan.

5.3 General Care

  • Keep the device clean and free from dust and debris.
  • Avoid exposing the device to extreme temperatures or moisture.
  • Store the device in a safe place when not in use.

6. Troubleshooting

  • Firmware Update Failure: If the firmware update fails via the Mobile KD App, reconnect the device manually or use the KD PC software to perform the update.
  • Device Not Pairing: Ensure Bluetooth is enabled on both the KD-X2 and your mobile device. Make sure the KD-X2 is powered on and in an awakened state, and keep it close to your phone during the pairing process. Verify the passcode "KEYDIY" is entered correctly.
  • App/System Errors: If you encounter general system problems or app errors, try restarting the app and the KD-X2 device. Ensure your app is updated to the latest version.
  • Functionality Issues: If a specific function is not working, ensure the device firmware and remote data are up to date. Refer to the relevant section in this manual or the Mobile KD App for specific function instructions.

7. User Tips

  • Unlocking Used Keys: The KD-X2's "REMOTE UNLOCK" option (available in newer firmware versions like 4.6.2 and above) allows you to unlock and reuse second-hand keys, potentially saving costs on new key purchases.
  • ID46 Compatibility: The KD-X2 is capable of handling ID46 transponders for both cloning and proximity key unlock functions.
  • KD Data Collector: For easier chip data collection from vehicles, consider using the KD Data Collector. This accessory eliminates the need to place the KD-X2 antenna close to the ignition coil.
KD Data Collector device
Figure 14: KD Data Collector, an accessory for easier chip data collection.

8. Warranty and Support

For after-sales service and technical support, please contact KEYDIY customer service.

  • Customer Service Hotline: 4008262518
  • Free Returns: Enjoy free returns within 90 days of purchase.
  • Fast Delivery Guarantee: The product comes with a fast delivery guarantee, offering a $1.00 coupon code if delivery is delayed, and refunds if the package is lost or items are damaged.
  • Security & Privacy: Your personal details are protected and not shared with third parties without consent.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.