Estardyn NV3007

Contents

Estardyn 2.79-Inch NV3007 TFT LCD Display User Manual

Model: NV3007

1. Introduction

This manual provides detailed instructions for the Estardyn 2.79-inch NV3007 TFT LCD Display module. This full-color display features a 142x428 resolution and utilizes an 8-pin SPI interface, making it suitable for a wide range of embedded applications. Please read this manual thoroughly before operating the device to ensure proper usage and optimal performance.

2. Features

  • Display Size: 2.79-inch diagonal
  • Resolution: 142x428 pixels
  • Display Type: TFT LCD, Full Color
  • Driver IC: NV3007
  • Interface: 4-wire SPI (8-pin)
  • Wide Operating Voltage: 3V-5V
  • Operating Temperature Range: -20°C to 70°C
  • Compact design for easy integration

3. Specifications

The following table outlines the key technical specifications of the Estardyn 2.79-inch NV3007 TFT LCD Display module.

ParameterValue
Display Size2.79 inch
Resolution142x428
Display ColorColorful
Drive ICNV3007
Power Supply Voltage3V-5V
Interface Type4-wire SPI
Working Temperature-20°C ~ 70°C
Overall Dimensions (mm)25.9 x 78 x 6
Display Area (mm)21.28 x 64.14
Product parameters and pin definition table
Figure 3.1: Product Parameters and Pin Definition
Technical drawing with dimensions and pinout
Figure 3.2: Mechanical Dimensions and Pinout Diagram

4. Pin Definition and Connection (Setup)

The display module features an 8-pin interface for connection to a microcontroller or other host device. Refer to the table below for pin assignments and their functions.

PINSymbolFunction
1GNDPower Ground
2VDDWorking Voltage (3V-5V)
3SCLSPI Clock Line
4SDASPI Data Line
5RESDisplay Reset Pin
6DCCommand/Data Control Pin
7CSChip Select Signal
8BLBacklight Control Pin

Connection Guidelines:

  1. Connect the GND pin to the ground of your microcontroller.
  2. Connect the VDD pin to a 3V-5V power supply. Ensure the voltage is within the specified range.
  3. Connect SCL, SDA, RES, DC, and CS pins to appropriate GPIO pins on your microcontroller.
  4. Connect the BL pin to a suitable power source or PWM pin for backlight control, if desired.
  5. Always double-check your wiring before applying power to prevent damage to the module or host device.

5. Operating Instructions

To operate the NV3007 TFT LCD display, you will need to initialize it via the SPI interface and then send display data. This typically involves:

  1. Power Up: Apply power to the VDD and GND pins.
  2. Hardware Reset: Toggle the RES pin (usually low for a short period, then high) to reset the display controller.
  3. Software Initialization: Send a sequence of commands via the SPI interface (using SCL, SDA, DC, CS) to configure the display controller (e.g., set display mode, color depth, gamma correction). Refer to the NV3007 datasheet for the exact command sequence.
  4. Backlight Control: Control the backlight brightness using the BL pin. This can be a simple ON/OFF or a PWM signal for dimming.
  5. Display Data Transfer: Send pixel data to the display RAM via SPI. The data format will depend on the chosen color depth and display mode.

Example libraries for common microcontrollers (e.g., Arduino, ESP32) often provide functions to simplify these steps. Ensure your chosen library supports the NV3007 driver IC and the 142x428 resolution.

6. Fields of Application

The Estardyn 2.79-inch NV3007 TFT LCD Display is versatile and can be integrated into various electronic projects and products. Common applications include:

Examples of applications including smartwatches, energy control, GPS navigators, POS systems, industrial equipment, automation equipment, telecommunications, household appliances, and dashboards.
Figure 6.1: Diverse Applications of the Display Module
  • Smartwatches and Wearable Devices
  • Energy Control Systems
  • GPS Navigators and Automotive Displays
  • POS (Point of Sale) Systems
  • Industrial Control Equipment
  • Automation Equipment Interfaces
  • Telecommunications Devices
  • Household Appliances with Display Interfaces
  • Custom Dashboards and Instrumentation

7. Maintenance

To ensure the longevity and optimal performance of your TFT LCD display, follow these maintenance guidelines:

  • Cleaning: Use a soft, lint-free cloth slightly dampened with water or a specialized screen cleaner. Avoid harsh chemicals, abrasive materials, or excessive pressure.
  • Handling: Always handle the module by its edges. Avoid touching the display surface or the flexible flat cable (FPC) connector.
  • Storage: Store the module in a dry, dust-free environment, away from direct sunlight and extreme temperatures.
  • Power Supply: Ensure a stable power supply within the specified voltage range (3V-5V). Voltage fluctuations can damage the display.
  • ESD Protection: Always use proper electrostatic discharge (ESD) precautions when handling the module to prevent damage to sensitive components.

8. Troubleshooting

If you encounter issues with your display module, consider the following troubleshooting steps:

ProblemPossible CauseSolution
Display is blank/no image
  • No power or incorrect voltage
  • Incorrect wiring (GND, VDD, SPI pins)
  • Display not initialized correctly
  • Backlight not enabled
  • Verify power connections and voltage (3V-5V).
  • Check all pin connections against the Pin Definition table.
  • Review your initialization code and ensure all commands are sent correctly.
  • Ensure the BL pin is correctly powered or controlled.
Garbled or distorted image
  • Incorrect SPI communication speed
  • Data format mismatch
  • Timing issues in SPI communication
  • Loose FPC connection
  • Adjust SPI clock speed.
  • Confirm data format (e.g., 16-bit, 18-bit color) matches your code and display settings.
  • Check for proper timing in your SPI driver.
  • Ensure the FPC is securely seated in its connector.
Display shows only white or black screen
  • Reset pin (RES) not toggled
  • Initialization commands not sent or incorrect
  • No display data being sent
  • Ensure the RES pin is properly reset.
  • Verify the display initialization sequence.
  • Confirm that pixel data is being written to the display memory.

9. User Tips

Based on user feedback, this display module is generally well-regarded for its quality and performance. Users have noted:

  • The display offers good visual quality for its size and resolution.
  • It is a reliable component for various embedded projects.
  • Proper attention to wiring and software initialization is key for a smooth setup.

10. Warranty and Support

For technical support, driver code examples, or warranty inquiries, please contact the manufacturer, Estardyn, or your point of purchase. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.