W-King T11

Contents

W-KING T11 Portable Party Speaker

Model: T11 | Brand: W-King

Introduction

Thank you for choosing the W-KING T11 Portable Party Speaker. This powerful Bluetooth speaker is designed to deliver an immersive audio experience with deep bass, vibrant RGB lighting, and versatile connectivity options, perfect for any party or outdoor event. This manual will guide you through the setup, operation, and maintenance of your speaker to ensure optimal performance and longevity.

Video: Demonstration of W-KING T11 speaker features including sound, RGB lights, and connectivity.

Package Contents

Please check the box for the following items:

  • W-KING T11 Portable Speaker
  • 3.5mm Audio Cable
  • 15V / 1.6A Power Adapter
  • User Manual (PDF available at link)

Controls and Ports

Familiarize yourself with the speaker's control panel and input/output ports.

W-KING T11 Speaker back panel with labeled ports

Image: Rear panel of the W-KING T11 speaker showing various input and output ports.

  1. Microphone/Guitar Input (6.35mm Jack): For connecting dynamic microphones or guitars.
  2. Reset Button: To reset the speaker to factory settings.
  3. USB Port (as Power Bank): For charging external devices.
  4. USB Flash Drive Port: For playing music from a USB flash drive.
  5. AUX Input (3.5mm): For connecting external audio devices via a 3.5mm audio cable.
  6. TF Card Slot: For playing music from a TF (MicroSD) card.
  7. Charging Port (DC 15V): For connecting the provided power adapter to charge the speaker.

The top panel includes buttons for Power, Volume Up/Down, Play/Pause, Mode, Light Control, and TWS pairing.

Setup

1. Initial Charging

  • Before first use, fully charge the speaker. Connect the provided 15V/1.6A power adapter to the Charging Port (7) and plug it into a power outlet.
  • The charging time is approximately 3.5 hours. The charging indicator will show the charging status.

2. Powering On/Off

  • To Power On: Press and hold the Power button on the top panel for a few seconds until you hear an audible prompt and the lights activate.
  • To Power Off: Press and hold the Power button again for a few seconds.

3. Bluetooth Pairing

  • Turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing Bluetooth indicator.
  • On your device (smartphone, tablet, etc.), enable Bluetooth and search for "W-KING T11" in the list of available devices.
  • Select "W-KING T11" to connect. Once connected, you will hear an audible confirmation, and the Bluetooth indicator will stop flashing.

4. True Wireless Stereo (TWS) Pairing

To achieve a 480W ultra-stereo sound experience, you can pair two W-KING T11 speakers together.

Two W-KING T11 speakers paired for TWS

Image: Two W-KING T11 speakers wirelessly paired to create a wider stereo soundstage.

  • Ensure both W-KING T11 speakers are powered on and not connected to any Bluetooth device.
  • On one of the speakers (this will be your primary speaker), short press the TWS button. It will search for the other speaker.
  • The speakers will automatically connect to each other. You will hear a confirmation tone.
  • Once paired, connect your device to the primary speaker via Bluetooth as described above. Audio will now play through both speakers in stereo.

5. Connecting Other Audio Sources

  • AUX Input: Insert a 3.5mm audio cable into the AUX Input port (5) and connect the other end to your audio device. The speaker will automatically switch to AUX mode.
  • USB Flash Drive: Insert a USB flash drive into the USB Flash Drive Port (4). The speaker will automatically detect and play supported audio files.
  • TF Card: Insert a TF (MicroSD) card into the TF Card Slot (6). The speaker will automatically detect and play supported audio files.
  • Microphone/Guitar: Plug your dynamic microphone or guitar into the Microphone/Guitar Input (1).

Operating Instructions

1. Basic Playback Controls

  • Play/Pause: Press the Play/Pause button on the top panel.
  • Volume Up/Down: Press the Volume + or Volume - buttons.
  • Next Track: Long press the Volume + button.
  • Previous Track: Long press the Volume - button.

2. Light Modes

The W-KING T11 features dynamic RGB party lights with 8 colors and 6 lighting effects.

W-KING T11 speaker with RGB lights and modes

Image: W-KING T11 speaker showcasing its dynamic RGB lighting with various modes and colors.

  • Change Light Effect: Short press the Light Control (sun icon) button on the top panel to cycle through different lighting effects.
  • Turn Lights Off: Continue pressing the Light Control button until the lights turn off.
  • The lighting effects will change dynamically with the music and volume.

3. EQ Modes (Indoor/Outdoor)

Tailor your sound experience with different EQ modes.

  • Switch EQ Mode: Long press the "Triangular Tandem" button (often the TWS button) for 2 seconds to switch between Bass Mode (Indoor) and Treble Mode (Outdoor).

4. Microphone and Guitar Usage

W-KING T11 speaker with microphone and guitar

Image: W-KING T11 speaker connected to a microphone and guitar, ready for karaoke or live performance.

  • Microphone Volume: When a microphone is plugged in, short press the "MIC VOL +/-" buttons on the top panel to adjust its volume.
  • Microphone Echo: When a microphone is plugged in, short press the "ECHO +/-" buttons to adjust the echo effect.
  • Guitar Function: The guitar function can only be used when the reverb (echo) effect is set to 0. After inserting the guitar, short press the "ECHO -" button repeatedly until you hear a "bee" sound, indicating the reverb effect is 0.

5. Power Bank Function

The speaker can act as a power bank to charge your smart devices.

  • Activate Power Bank: Press the Power button for 1 second to turn on the power bank function separately.
  • Alternatively, when the speaker is turned on, the power bank function is always active.
  • Connect your device to the USB Port (as Power Bank) (3) using a USB cable.
  • Note: If no load is detected within 10 seconds when the power bank function is turned on alone, it will automatically turn off. The power bank output will also turn off if the speaker battery drops below 20% or if the speaker is being charged.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners, alcohol, or other chemical solvents, as they may damage the surface.
  • Water Resistance: While the speaker is IPX6 waterproof, do not submerge it in water. Ensure all port covers are securely closed when exposed to water.
  • Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, fully charge the speaker at least once every three months if not used regularly. Avoid completely draining the battery frequently.

Troubleshooting

ProblemSolution
Speaker does not turn on.Ensure the battery is charged. Connect the speaker to the power adapter and try again.
Cannot pair via Bluetooth.
  • Ensure the speaker is in pairing mode (Bluetooth indicator flashing).
  • Make sure Bluetooth is enabled on your device.
  • Move the speaker closer to your device.
  • Forget "W-KING T11" from your device's Bluetooth list and try pairing again.
  • Restart both the speaker and your device.
No sound from speaker.
  • Increase the volume on both the speaker and your connected device.
  • Ensure the correct input source (Bluetooth, AUX, USB, TF) is selected.
  • Check if the audio cable (for AUX) is properly connected.
TWS pairing fails.
  • Ensure both speakers are powered on and not connected to any other Bluetooth device.
  • Place the speakers close to each other.
  • Try resetting both speakers and attempting TWS pairing again.
Microphone/Guitar not working.
  • Ensure the microphone/guitar is properly plugged into the 6.35mm jack.
  • Adjust the MIC VOL +/- buttons.
  • For guitar, ensure the ECHO is set to 0.
  • Only dynamic microphones are supported.

Specifications

FeatureDetail
Model NumberT11
BrandW-King
Output Power (RMS)100W (Peak 220W)
Sound Pressure Level115dB
Bluetooth Version5.3
Bluetooth Working Distance10 meters (max)
Waterproof RatingIPX6
Battery Capacity7650 mAh
PlaytimeUp to 24 hours (varies with volume and content)
Charging InputDC 15V / 1.6A
Charging TimeApprox. 3.5 hours
Frequency Range80Hz-20KHz
Input/OutputAUX, USB, TF Card, 6.35mm Mic/Guitar
Dimensions (H x W x D)17.4 x 8.7 x 8.07 inches (approx. 44.2 x 22.1 x 20.5 cm)
Weight7.0 kg (approx. 15.4 lbs)
Woofer SizeDual 5.25 inches
Tweeter SizeDual 1.2 inches
Passive RadiatorsTwo (6.6 inches each)
Sound ModesStereo Sound Mode, Extra Bass Mode, Standard Mode, 3 EQ Modes
Power SourceAC, Battery, USB
CertificationsCE, FCC, RoHS, WEEE

User Tips

Based on common user inquiries and product features:

  • For optimal bass performance, ensure the speaker is placed on a stable surface.
  • When using the microphone or guitar, experiment with the ECHO settings to find your preferred sound. Remember to set ECHO to 0 for guitar input.
  • Utilize the TWS pairing feature for larger gatherings to create a more immersive and powerful stereo sound experience.
  • Keep the speaker charged, especially before outdoor events, to fully utilize its 24-hour playtime and power bank functionality.

Warranty and Support

W-KING products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official W-KING website or contact your retailer. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.