HM65 All-in-One Motherboard HM65 All-in-One Motherboard

Contents

HM65 All-in-One Computer Motherboard User Manual

DDR3 Memory with COM Interface ITX Industrial Control Motherboard DC12V-19V Power Supply

1. Product Information

This manual provides essential information for the safe and efficient use of your HM65 All-in-One Computer Motherboard.

  • Product Name: HM65 All-in-One Computer Motherboard
  • Model: HM65
  • Batch Number: LOT202604

2. Manufacturer Information

Manufacturer: Changsha Sematic E-commerce Co., Ltd.

Address: CN-Xiangjiang North Road Cross-border E-commerce Industrial Park, 3rd Floor, Peking University Jade Bird Ketai Education, Yunzhongfu Holding Group Sematic Changsha Hunan Province, China

Email: 364824110@qq.com

Phone: +86 13627416939

EU Authorized Representative: EC REP SERVICES SL

Address: ES-CALLE GRAN VIA 49, 7 DCH. Adra Almeria, Spain

Email: ecrepservice@hotmail.com

Phone: +34 682797075

3. Safety and Warnings

Read all instructions before use to ensure safety and prevent damage.

  • WARNING: Keep this product and its small parts out of reach of children under 3 years old due to choking hazard.
  • WARNING: Do not disassemble, modify or repair this product by yourself. Unauthorized modifications will void the warranty and may cause safety hazards.
  • WARNING: Do not expose the product to water, moisture, extreme temperatures (below 0° C or above 40° C) or direct sunlight for long periods.
  • WARNING: Stop using the product immediately if it shows signs of damage, cracking, overheating or malfunction.
  • WARNING: Keep the product away from open flames, flammable materials and high-voltage sources.
  • WARNING: Please use only the original charging cable and adapter. Do not overcharge the battery.
  • WARNING: Wear protective gloves when installing sharp-edged parts.

4. Setup and Installation

Follow these general guidelines for setting up your HM65 motherboard. For detailed component-specific instructions, refer to the respective component manuals.

  1. Preparation: Remove all protective films and packaging materials from the product. Check that all parts are complete and undamaged.
  2. Component Installation: Carefully install the CPU, DDR3 memory module, and any M.2 storage devices into their respective slots. Ensure proper alignment and secure seating.
  3. Power Connection: Connect the DC12V-19V power supply to the motherboard. Ensure the power source matches the specified voltage range.
  4. Peripheral Connections: Connect necessary peripherals such as display (HDMI/VGA), USB devices, Ethernet cable, and audio devices to the appropriate ports.
  5. System Integration: Integrate the motherboard into your chosen ITX chassis or industrial control system, ensuring proper mounting and ventilation.

Video: Unboxing and overview of the HM65 All-in-One Computer Motherboard, highlighting its compact size and various ports.

Detailed specifications and port layout diagram for the HM65 All-in-One Computer Motherboard.

Image: Detailed diagram showing the layout of ports and components on the HM65 motherboard.

5. Operating Instructions

Once the motherboard is properly installed and connected, follow these steps for operation:

  1. Power On: Ensure all connections are secure, then apply power to the motherboard. The system should initiate the boot process.
  2. BIOS/UEFI Configuration: Access the BIOS/UEFI settings (usually by pressing DEL or F2 during startup) to configure boot options, system time, and other settings as needed.
  3. Operating System Installation: Install your preferred operating system onto a connected storage device.
  4. Driver Installation: Install all necessary drivers for the chipset, graphics, audio, and network components to ensure optimal performance.
  5. Normal Operation: Use the product only for its intended purpose as described in its specifications.
  6. Power Off: Before disconnecting power, always shut down the operating system gracefully.
  7. After Use: Turn off the product (if applicable) and store it in a safe place, away from environmental hazards.

6. Maintenance and Storage

Proper maintenance and storage will extend the lifespan of your motherboard.

  • Cleaning: Turn off the device before cleaning. Use a soft, lint-free cloth to wipe the surface. Do not use harsh chemicals or abrasive cleaners. Ensure no dust accumulates in ports or heatsinks.
  • Storage: Store in a dry place at room temperature (15°C - 35°C).
  • Long-term Storage: If not used for a long time, ensure the motherboard is stored in an anti-static bag in a controlled environment.

7. Troubleshooting

This section provides basic troubleshooting steps for common issues. For more complex problems, contact technical support.

  • No Power:
    • Check if the DC power adapter is securely connected and providing the correct voltage (12V-19V).
    • Ensure the power button/switch is correctly wired to the motherboard's front panel header.
  • No Display:
    • Verify that the monitor is connected to the correct video output (HDMI or VGA) and is powered on.
    • Reseat the memory module to ensure it is properly installed.
    • Check if the CPU is correctly seated in its socket.
  • System Instability/Crashes:
    • Ensure adequate cooling for the CPU and chipset. Check fan operation.
    • Verify that the memory module is compatible and functioning correctly.
    • Update BIOS/UEFI to the latest version.
  • Peripheral Not Detected:
    • Ensure the peripheral is correctly connected to the appropriate port (USB, SATA, etc.).
    • Install or update the necessary drivers for the peripheral and motherboard.

8. Technical Specifications

The following table outlines the key technical specifications of the HM65 All-in-One Computer Motherboard.

FeatureDetails
Processor SupportIntel 2nd/3rd Generation Core i3/i5/i7 Processors
ChipsetHM65 Series
Memory1x DDR3 SO-DIMM slot, supports up to 8GB DDR3 1600MHz
Display Interfaces1x HDMI, 1x VGA (supports dual display)
Network1x Realtek Gigabit Ethernet
Audio1x MIC-IN, 1x LINE-OUT
USB Ports4x USB 2.0 (rear), 2x USB 2.0 (internal header)
COM Port1x COM (RS232 mode)
Storage1x M.2 slot (NGFF/NVME), 2x SATA ports (1x SATA 3.0, 1x SATA 2.0)
Power SupplyDC12V-19V input, 1x 4PIN power supply header
Power Consumption18W (typical)
Operating Temperature-10°C to 60°C
Storage Temperature-25°C to 70°C
Operating Humidity10% to 90% (non-condensing)
Storage Humidity10% to 90% (non-condensing)
Physical Dimensions170 mm x 170 mm (ITX Form Factor)
MaterialAluminum alloy
CertificationsCE, UKCA, FC
HM65 All-in-One Computer Motherboard with a ruler for size comparison.

Image: The HM65 motherboard shown with a ruler, indicating its 170mm x 170mm ITX form factor.

9. Compliance Information

This product complies with the relevant EU legislation, including Machinery Regulation (EU) 2023/1230. This product bears the CE, UKCA and FC marks.

Compliance markings including CE, UKCA, and FC logos.

Image: Compliance markings for the product.

10. Disposal and Recycling

This symbol indicates that this product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.

For more information on proper disposal, please consult your local authorities or the retailer where the product was purchased.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase using the contact details provided in Section 2 of this manual.

Please have your product model and batch number ready when contacting support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.