Veinasa XS-RS01

Contents

Veinasa XS-RS01 Tipping Bucket Rain Gauge

Instruction Manual

1. Introduction

The Veinasa XS-RS01 is a precision tipping bucket rain gauge designed for measuring natural rainfall. It converts rainfall into digital information output, suitable for various applications requiring information transmission, processing, recording, and display. This instrument is composed of two main parts: rain bearing components and metering components.

The XS-RS01 is ideal for use in meteorological stations, hydrological stations, agricultural and forestry applications, national defense, and field observation.

Veinasa XS-RS01 Tipping Bucket Rain Gauge

Figure 1: Veinasa XS-RS01 Polycarbonate Tipping Bucket Rain Gauge. Range: 0~100mm, Supply voltage: 5-24V DC.

2. Safety Information

Please read this manual carefully before installation and operation. Failure to follow instructions may result in damage to the instrument or inaccurate readings.

  • Ensure the instrument is installed in a stable and level position to guarantee accurate measurements.
  • Do not attempt to modify the internal components or the factory-set tilt angle of the tipper.
  • Use the specified power supply voltage to avoid electrical damage.
  • Keep the instrument free from debris and obstructions that could affect rainfall collection.

3. Product Overview

3.1 Components

The XS-RS01 rain gauge consists of a rain bearing part (outer casing and funnel) and metering components (tipping bucket mechanism, level instrument, and output electronics).

Exploded view of Veinasa XS-RS01 rain gauge

Figure 2: Exploded view of the XS-RS01 showing the outer casing and internal tipping bucket mechanism. Resolution: 0.2mm, Signal output: 0-10V, Power supply: 12-24V DC.

Disassembled Veinasa XS-RS01 rain gauge

Figure 3: Disassembled view of the rain gauge, highlighting the internal components.

3.2 Key Features

  • Accurate Measurements: Designed for high precision rainfall measurement.
  • Multiple Output Methods: Supports various signal outputs including Voltage (0-2V, 0-5V, 0-10V), 4-20mA current loop, RS485 (Modbus-RTU), and Pulse signals.
  • Strong Anti-interference: Robust design for reliable operation in various environments.
  • Durable Material: ABS engineering plastic shell is moisture-proof, corrosion-proof, and durable.
  • Level Calibration: Equipped with a horizontal bubble for easy leveling during installation.
  • Smooth Rain-Bearing Opening: Meets national standard GB/T21978.2-2014 for tipping bucket rain gauges.
  • Patented Design: Features a patented anti-insect net and anti-blocking nozzle design.
Key features of Veinasa XS-RS01 rain gauge

Figure 4: Visual representation of key features: Accurate measurements, Multiple output methods, Strong anti-interference.

Detailed view of rain gauge components

Figure 5: Detailed views of the delicate ABS material, level calibration bubble, and smooth rain-bearing opening.

4. Specifications

Parameter Value
Rain Inlet Dimension φ200mm
Acute Angle of Cutting Edge 40°-45°
Range 0 ~ 100mm (analog signal range; RS485 signal not limited)
Resolution 0.1mm/0.2mm/0.5mm
Rain Intensity Range 0.01mm-4mm/min (Maximum allowed rain intensity: 8mm/min)
Accuracy ≤ ± 3%
Output Signal (Voltage) 0-2V, 0-5V, 0-10V (selectable)
Output Signal (Current) 4-20mA (Current loop)
Output Signal (Digital) RS485 (Standard Modbus-RTU protocol, device default address: 01)
Output Signal (Pulse) One pulse represents 0.1mm/0.2mm/0.5mm rainfall
Supply Voltage (for 0-2V, RS485, SDI-12) 5-24V DC
Supply Voltage (for 0-5V, 0-10V, 4-20mA) 12-24V DC
Working Temperature 0℃ ~ 70℃ (optional heating function, down to -40℃)
Working Humidity < 100% (non-condensing)
Material ABS
Warranty 1 Year
Installation dimensions and packaging parameters

Figure 6: Installation dimensions (Ø300, Ø238, Ø316, 233, 34 mm) and outer box parameters (28x27.5x27.5 cm, Volume: 21175 cm³, Weight: 1.4 kg).

5. Setup & Installation

5.1 Pre-installation Checks

Before installation, ensure all components are present and undamaged. The tilt angle of the tipper is factory-adjusted and locked; do not attempt to adjust it on site.

5.2 Physical Installation

  1. Choose a suitable location that is open and free from obstructions (e.g., buildings, trees) that could block rainfall.
  2. Mount the rain gauge on a stable, level surface. Use the integrated horizontal bubble on the chassis to ensure the instrument is perfectly level.
  3. Secure the base of the rain gauge using appropriate fasteners (not included).
Applications of Veinasa XS-RS01 rain gauge

Figure 7: The rain gauge is applied in various natural environments such as Meteorology, Agriculture, and Hydrology/Water Resources.

5.3 Electrical Connection

Connect the power supply and signal output cables according to your chosen output signal type and system requirements. Refer to the specifications table for appropriate voltage ranges.

  • For 0-2V, RS485, SDI-12 output: Use 5-24V DC power supply.
  • For 0-5V, 0-10V, 4-20mA output: Use 12-24V DC power supply.

Ensure proper wiring for the selected output method (e.g., pulse, RS485, 4-20mA, 0-2/5/10V). The instrument can be integrated with various data acquisition systems, including desktop and mobile applications via WiFi, Ethernet, 4G, or LoRa.

Multiple output methods for Veinasa XS-RS01

Figure 8: Diagram illustrating multiple output methods (pulse, RS485, 4-20mA, 0-2/5/10V) and connectivity options (WiFi, Ethernet, 4G, LoRa) for desktop and mobile applications.

6. Operation

The XS-RS01 operates by collecting rainfall in its funnel, which then directs water into a precision tipping bucket mechanism. Each tip of the bucket corresponds to a specific amount of rainfall (e.g., 0.1mm, 0.2mm, or 0.5mm, depending on the model's resolution). These tips are converted into electrical signals (switch values) that are transmitted to a connected data logger or monitoring system.

The instrument can output 10 different rainfall parameters, providing comprehensive data for analysis:

  • Instantaneous rainfall
  • Rainfall on the day
  • 24-hour period of minimum rainfall
  • 24-hour minimum rainfall
  • 24-hour period of maximum rainfall
  • Maximum rainfall in 24 hours
  • Rainfall in the last hour
  • Hourly rainfall
  • Total rainfall
  • Yesterday's rainfall
Diagram of 10 rainfall parameters

Figure 9: The 10 rainfall parameters that can be output by the instrument.

Video 1: Demonstration of the Veinasa XS-RS01 Tipping Bucket Rain Gauge, showing its internal mechanism, testing with a multimeter and Arduino, and various applications. The video highlights its function in converting rainfall into digital information for processing, recording, and display, and its use in meteorological, hydrological, and agricultural settings.

7. Maintenance

To ensure the continued accuracy and longevity of your Veinasa XS-RS01 rain gauge, regular maintenance is essential:

  1. Regular Cleaning: Periodically clean the tipping bucket and the water outlet of the water diversion funnel. This prevents blockages from leaves, insects, or other debris that could lead to inaccurate readings.
  2. Inspection: Regularly inspect the instrument for any signs of damage or wear.
  3. Do Not Adjust Tipper Angle: The tilt angle of the tipper is precisely adjusted and locked at the factory. Do not attempt to adjust this screw on site, as it will compromise the instrument's calibration and accuracy.
  4. Level Check: Periodically verify that the instrument remains level using the built-in horizontal bubble.

8. Troubleshooting

If you encounter issues with your Veinasa XS-RS01 rain gauge, consider the following:

  • No Output/Inaccurate Readings:
    • Check power supply connections and ensure correct voltage.
    • Verify signal cable connections to your data acquisition system.
    • Inspect the tipping bucket and funnel for any blockages or debris.
    • Ensure the instrument is perfectly level.
  • Physical Damage: If the instrument has suffered physical damage, contact customer support for assistance.

For persistent issues or complex problems, please contact Veinasa customer support.

9. Warranty & Support

The Veinasa XS-RS01 Tipping Bucket Rain Gauge comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please contact your vendor or Veinasa directly.

Mianyang Xiangshu Electronic Technology Co., Ltd. focuses on the R&D and production of temperature and humidity, soil, liquid level, and weather sensors and instrumentation. They have over 15 years of professional experience in meteorology and agriculture industry solutions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.