retekess TA003P

Contents

RETEKESS TA003P Wireless Headphones Hifi Sound Quality Wireless Headset Portable Transmitter and Receiver Headphones User Manual

Model: TA003P | Brand: Retekess

Introduction

The RETEKESS TA003P Silent Disco Headphone System is designed to provide a high-fidelity audio experience with wireless freedom. This system includes a portable transmitter and multiple headphone receivers, ideal for various applications such as silent discos, outdoor events, meditation, yoga, and educational settings. It features long battery life, extensive working range, noise reduction technology, and multi-channel support for flexible use.

What's in the Box

Transmitter Box

  • 1 * Transmitter
  • 1 * Antenna
  • 1 * 9V Power Adapter
  • 1 * male 1/8" to male 1/8" cable
  • 1 * male RCA to female 1/8" cable
  • 1 * User Manual

Receiver Box

  • 1 * Headphone receiver
  • 1 * USB charging cable
  • 1 * User Manual

Note: RCA to RCA cable, 1/8" Microphone, and wire are not included.

Features

General System Features

  • 3 Channels: Supports flexible switching between 6 US channels and 3 European channels.
  • Long Battery Life: Headset provides 12 hours, transmitter provides 10 hours (high power) / 25 hours (low power).
  • Wireless Connection: UHF/RF technology for clear audio transmission.
  • Long Working Range: Up to 300m (high power) / 100ft (low power) in open areas.
  • Hi-Fi Sound: Premium audio with advanced 40mm speakers for outstanding sound performance.
  • Noise Reduction: Active noise reduction system eliminates ambient noise for crystal clear sound.
  • Universal Device Connect: Compatible with various audio sources like phones, laptops, and microphones.
  • Foldable & Portable: Lightweight design for comfortable wear and easy transport.
  • Unlimited Headsets: One transmitter can be paired with any number of headphones.
  • Automatic Functions: Auto mute and automatic shut-off after 10 minutes of no signal detection to conserve battery life.

Transmitter Features (Figure A & B)

  1. MIC (1/8 inch microphone input): Plug in a wired microphone to be mixed with the audio being transmitted.
  2. RCA R+L Input: Connect your mixer or audio device to the Left and Right RCA input.
  3. POWER Indicator: Illuminates green when charging, red when on.
  4. OFF-LO-H Switch: Toggles transmitter on/off and selects power level. LO for low power (approx. 100 feet), HI for high power (approx. 300 feet). High power mode requires DC 9V adapter.
  5. USB Factory Service: For device updates by service personnel only. Do NOT use for charging/power.
  6. ANTENNA: BNC connector for antenna attachment.
  7. CHANNEL Button: Changes the channel (1, 2, 3, etc.). LED display shows current channel. Ensure different channels for multiple transmitters.
  8. DC-9V: Connect power adapter here to power unit and charge internal battery.

Headphone Receiver Features

  • Double PLL system: For ultimate frequency stability.
  • Big channel-indicating logo light: Logo color changes to indicate the selected channel.
  • Soft leatherette ear cushions and robust headband: For extreme comfort during long hours of wear.
  • Shock-Resistant, Robust Metal Headband.

Setup and Getting Started

Transmitter Setup

  1. Attach the antenna: Connect the antenna to the BNC connector on the transmitter.
  2. Connect Audio Source: Connect a cable from your music source's audio output (e.g., laptop, phone, tablet) to the RCA Audio Input on the transmitter. Use the provided male 1/8" to male 1/8" cable or male RCA to female 1/8" cable as needed.
  3. Connect Microphone (Optional): If using a microphone, plug it into the 1/8" MIC input on the transmitter.
  4. Power On: Long-press the power button on the transmitter to turn it on.
  5. Select Transmission Power Level: Use the OFF-LO-H switch to select LO (low power) or HI (high power). High power mode requires the DC 9V adapter to be plugged in.
  6. Adjust Channels: Press the CHANNEL button to cycle through available channels (CH.01, CH.02, CH.03, etc.). Ensure each transmitter operates on a different channel if multiple are used simultaneously.
Diagram showing transmitter connections for audio input from various devices like phone, laptop, and tablet, and microphone input.

Figure: Transmitter connections for various audio sources.

Diagram illustrating how to connect the transmitter to a phone, laptop, or tablet using USB-C for power and 3.5mm jack for audio.

Figure: Easy connection options for the transmitter.

Headphone Receiver Setup

  1. Power On: Hold the POWER/TUNE button for approximately 3 seconds to turn the headphones on.
  2. Select Channel: Press the POWER/TUNE button once to change the selected channel. The LED lights on the headphones will change color to indicate the channel:
    • Channel 1 - Red
    • Channel 2 - Green
    • Channel 3 - Blue
  3. Adjust Volume: Move the VOLUME/LED switch to the left to increase volume, and to the right to decrease volume.
  4. Toggle LED Light Mode: Press and hold the VOLUME/LED switch for approximately 2 seconds to toggle the LED light mode between always on and off.
Diagram showing the controls on the headphone receiver, including POWER/TUNE and VOLUME/LED switch.

Figure: Headphone receiver controls.

Video: Demonstration of powering on the headphones and transmitter, adjusting channels, and mode switching.

Specifications

Transmitter Specifications
FeatureSpecification
SystemUHF/RF
Communication MethodFM
Audio ModeStereo
Transmit PowerLow Power: 12 dB ± 2, High Power: 25 dB ± 2
Battery2500 mAh / 7.4 V lithium battery
Charging Time6 hours
Battery Life8 hours (High Power), 20 hours (Low Power)
Charging Current5V/400mA (Power On); 5V/1200mA (Power Off)
Input PowerType-C 5V 2A
Operating Voltage6.4V–8.4V
Transmit Frequency (US)923.8Mhz, 924.5Mhz, 925.6Mhz
Transmit Frequency (EU)863.3Mhz, 863.9Mhz, 864.9Mhz
Antenna gain5dB
Sensitivity60mVp-p (TYP)
Headphones Specifications
FeatureSpecification
SystemUHF/RF
Operating Voltage3.2V to 4.2V
Signal-to-Noise Ratio (SNR)>75dB
Type-C INFast charging 5V/530mA
Distortion1%
Built-in Lithium Battery1000mAh/3.7V lithium battery
Battery Life12 hours
Charging Time (from empty to full)3.5 hours
Frequency Response30–15,000 Hz
Charging PortType-C
Receive Frequency (US)923.8Mhz, 924.5Mhz, 925.6Mhz
Receive Frequency (EU)863.3Mhz, 863.9Mhz, 864.9Mhz
Receive Sensitivity10dBuVemf
Receive Response60~15000HZ
Audio output Max.Power≥2200mVp-p
Max. Current300 mA
Channel quantity3 CH
Speaker40mm

Troubleshooting / FAQ

  • Why am I not hearing any sound from the headset receiver(s)?
    • Make sure the headset receivers are tuned to the same channel as the transmitter.
    • Double check volume levels at: Music source, any sound equipment connected to the transmitter, and headset receiver(s).
    • Double check the connections from the Music Source to the Audio Input.
    • Ensure the internal batteries are fully charged for both the transmitter and headset.
  • How many receivers can work at once?
    • There is no limit to the number of receivers that can be in one area.
  • Is there a pairing process to add additional headset receiver(s)?
    • No, there is no pairing process other than selecting the appropriate channel with the TUNE button located on the headset receiver(s).
  • How far does the transmitter reach when on high and low settings?
    • On the high setting, the operational range is approximately 300ft.
    • On the low setting, the operational range is approximately 100ft.
  • What is the expected battery life for the headphones and for the transmitter when being used remotely?
    • The headphones can run for about 8 hours continuously, and the transmitter can run for about 5 hours continuously before needing to be charged.
    • Please allow at least 6 hours of charging time.

Note: The transmitter will power off if no input signal is detected after 5 minutes.

User Tips

  • For optimal range and signal stability, ensure the transmitter's antenna is fully extended and unobstructed.
  • When using multiple transmitters, always assign each to a unique channel to prevent interference.
  • Regularly check battery levels before events to ensure uninterrupted operation.
  • Utilize the low power mode for smaller indoor events to conserve battery life.

Safety Information

RF Energy Exposure and Product Safety Guide

Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.

This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. RF energy, when used improperly, can cause biological damage.

All Retekess radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of the radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it.

Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits: http://www.who.int/en/

Local Government Regulations

When radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retekess radio has an RF Exposure Product Label. Also, your Retekess user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.

Radio License (if appropriate)

Governments keep the radios in classification, business radios operate on radio frequencies that are regulated by the local radio management departments (FCC, ISED, OFCOM, ANFR, BFTK, Bundesnetzagentur...). To transmit on these frequencies, you are required to have a license issued by them. For detailed classification and the use of your radios, please contact the local government radio management departments.

Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited.

Unauthorized modification and adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services.

Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.

FCC Requirements:

  • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • (If applicable) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.
  • (Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co.,Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.retekess.com.
  • Disposal: The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

IC Requirements:

Licence-exempt radio apparatus

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

  1. l'appareil ne doit pas produire de brouillage;
  2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

RF Exposure Information (if appropriate)

  • DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared.
  • DO NOT transmit for more than 50% of total radio use time, more than 50% of the time can cause RF exposure compliance requirements to be exceeded.
  • During transmissions, your radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so.
  • The device complies with RF specifications when the device used at 5mm from your body. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.
  • DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

Avoid Choking Hazard

WARNING

Small Parts. Not for children under 3 years.

Protect your hearing:

WARNING

  • Use the lowest volume necessary to do your job.
  • Turn up the volume only if you are in noisy surroundings.
  • Turn down the volume before adding headset or earpiece.
  • Limit the amount of time you use headsets or earpieces at high volume.
  • When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
  • Use careful with the earphone, as excessive sound pressure from earphones and headphones can cause hearing loss.

Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.

Avoid Burns

WARNING

Antennas

  • Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with the skin when the radio is in use, a minor burn can result.

Batteries (If appropriate)

  • When conductive material such as jewelry, keys or chains touch exposed terminals of the batteries, it may complete an electrical circuit (short circuit the battery) and become hot to cause bodily injury such as burns. Exercise care in handling any battery, particularly when placing it inside a pocket, purse or other container with metal objects.

Long transmission

  • When the transceiver is used for long transmissions, the radiator and chassis will become hot.

Safety Operation

WARNING

Forbid

  • Do not use charger outdoors or in moist environments, use only in dry locations/conditions.
  • Do not disassemble the charger, that may result in risk of electrical shock or fire.
  • Do not operate the charger if it has been broken or damaged in any way.
  • Do not place a portable radio in the area over an air bag or in the air bag deployment area. The radio may be propelled with great force and cause serious injury to occupants of the vehicle when the air bag inflates.

To reduce risk

  • Pull by the plug rather than the cord when disconnecting the charger.
  • Unplug the charger from the AC outlet before attempting any maintenance or cleaning.
  • Contact Retekess for assistance regarding repairs and service.
  • The adapter shall be installed near the equipment and shall be easily accessible.
  • Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
  • The plug considered as disconnect device of adapter.
  • The operating temperature of the EUT can't exceed the specified range.

Approved Accessories

WARNING

  • This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or designated for the product. Use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations.
  • For a list of Retekess-approved accessories for your radio model, visit the following website: http://www.Retekess.com

Warranty and Support

Guarantee

This guarantee card should be kept by the user; no replacement if lost. Most new products carry a two-year manufacturer's warranty from the date of purchase.

The user can get warranty and after-sales service as below:

  • Contact the seller where you buy.
  • Products Repaired by Our Local Repair Center.

For warranty service, you will need to provide a receipt proof of purchase from the actual seller for verification.

Exclusions from Warranty Coverage:

  • To any product damaged by accident.
  • In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs.
  • If the serial number has been altered, defaced, or removed.

Contact Information

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.