1. Introduction
Thank you for your purchase of the TENGKESi H09 Handheld Fan. This manual provides important information regarding the safe and correct use of your new device. Please read it carefully before operation and keep it for future reference. The H09 Handheld Fan offers powerful cooling with 100 adjustable wind speeds, a TEC superconducting ice-ceramic refrigeration chip for rapid cooling, and a long-lasting 5200mAh battery, all in a lightweight and portable design.
Product demonstration showcasing features and design.
2. Safety Instructions
To ensure safe operation and prevent damage, please adhere to the following guidelines:
- Initial Check: Before first use, inspect the product and power cord for any damage. Ensure they are in good condition before powering on.
- No Disassembly: It is strictly prohibited to disassemble the product or handle it roughly.
- Avoid Heat Sources: Do not place the product into or near fire to prevent fire and explosion hazards.
- Child and Pet Safety: Keep the product out of reach of children and pets.
- Proper Charging: When charging, use a charger with an output current of 5V/1A and the standard Type-C charging cable.
- Prevent Obstruction: Do not insert fingers or hard objects into the air inlet or outlet to avoid injury from the internal fan blades and damage to the product.
- Abnormalities: If any abnormalities occur during use, immediately stop using the product.
3. Product Overview and Components
Familiarize yourself with the different parts of your H09 Handheld Fan:
Product illustration highlighting key components and product information.
- Superconducting Cooler: The cooling element.
- Air Outlet: Where the cooled air is expelled.
- Gear Display: Shows the current fan speed.
- Fan Button: Controls the fan speed.
- Increase Air Speed Button: Increases the fan speed.
- Cooling Display: Indicates if the cooling function is active.
- Power Switch: Turns the device on/off.
- Charging Display: Shows charging status.
- Cooling Button: Activates/deactivates the cooling function.
- Decrease Air Speed Button: Decreases the fan speed.
- Charging Port: Type-C port for charging.
- Lanyard Hole: For attaching the included lanyard.
Detailed view of fan features: Non-slip Bottom Pad, Lanyard Port, Type-C Charging Port, Function Buttons, High Definition Digital Display, Power Master Switch.
4. Specifications
| Feature | Specification |
|---|---|
| Product Name | Hurricane Ice Pack Handheld Fan |
| Product Model | H09 |
| Product Power | 12W |
| Battery Voltage | 3.7V |
| Battery Capacity | 5200mAh |
| Wind Gear | 1-100 Gears |
| Cooling Mode | 1 Gear |
| Input Current/Voltage | 5V/1A |
| Operating Voltage/Current | 9V/2.8A |
| Net Weight | 258g |
| Endurance | 3-12H |
| Product Size | 180x58x76MM |
| Charging Port | Type-C |
| Product Material | ABS+Semiconductor+Stainless steel+Electronic components |
5. Setup
Your H09 Handheld Fan comes ready for use with minimal setup. Please ensure the device is fully charged before its first use for optimal performance.
- Unboxing: Carefully remove the fan and all accessories from the packaging.
- Inspect: Check the fan and the included Type-C cable for any visible damage.
- Initial Charge: Connect the Type-C cable to the fan's charging port and plug the other end into a 5V/1A USB power adapter (not included) or a compatible USB port. Refer to the 'Charging' section for indicator details.
- Lanyard Attachment: If desired, attach the included lanyard to the lanyard hole for easy carrying.
6. Operation
6.1. Power On/Off
- To Turn On: Slide the power switch upwards. The display will show "--" and then automatically turn off after 20 seconds of inactivity.
- To Turn Off: Slide the power switch downwards to close all modes.
6.2. Fan Speed Control
- Initial Speed: Click the Fan Button once to activate the fan at speed level 10.
- Increase Speed: Click the Fan Button again to increase the wind speed by 1 level.
- Rapid Speed Adjustment: Long press the Fan Button to rapidly increase the speed up to level 100. The display will show the corresponding gear.
6.3. Refrigeration Function
- Activate Cooling: Click the Refrigeration Button to turn on the cooling function. The display will show a lit-up snowflake icon.
- Deactivate Cooling: Click the Refrigeration Button again to turn off the cooling function. The display will show a snowflake icon with an "off" indicator.
- Rapid Cooling Adjustment: Long press the Refrigeration Button to rapidly reduce the cooling gears to level 1. The display will show the corresponding gear.
The fan's cooling function provides a refreshing breeze.
TEC Superconducting Ice-ceramic Refrigeration Chip for rapid cooling.
7. Charging
The H09 Handheld Fan is equipped with a Type-C charging port for convenient power replenishment.
- Charging Indicator:
- "Charging": Green light flashes.
- "Fully Charged": Red light flashes.
- No light: The light is always on (likely indicating power is connected but not actively charging or fully charged and unplugged).
- "False Power": If the battery is forced to turn on when critically low, the red light will flash for 3 seconds, and the device will continue to shut down.
- Charging Precaution: The cooling function cannot be activated while the fan is being charged. When charging, the fan's maximum speed is limited to 20 gears, and it can only be adjusted downwards, not upwards.
8. Battery Warnings and Care
The H09 Handheld Fan contains a lithium battery. Please observe the following warnings for safety and longevity:
- Handling Restrictions: Do not disassemble, impact, extrude, or place the battery into fire. If the battery shows significant bulging, discontinue use immediately and do not expose the product to high-temperature environments.
- Water Exposure: Do not use the battery after it has been immersed in water.
- Battery Replacement: Battery replacement should only be performed by the manufacturer or a qualified supplier. Any losses or impacts resulting from unauthorized battery replacement not in accordance with this guide will not be covered.
- Disposal: This product contains lithium batteries. Please separate them from household waste for recycling to reduce pollution and maximize environmental protection.
The 5200mAh battery provides ultra-long endurance.
9. Troubleshooting
- Fan not turning on: Ensure the power switch is slid upwards. Check if the battery is charged. If the battery is critically low, it may attempt to turn on briefly (red light flashes 3S) before shutting down again.
- Cooling function not working: The cooling function cannot be activated while the fan is charging. Ensure the fan is not connected to a power source if you wish to use cooling.
- Reduced fan speed during charging: This is normal. The fan's maximum speed is limited to 20 gears when charging, and can only be adjusted downwards.
- Unusual operation: If any abnormalities occur (e.g., strange noises, overheating, unusual smells), immediately stop using the product and contact customer support.
10. User Tips
- Optimal Cooling: For the most effective cooling, activate the refrigeration function in addition to your desired fan speed.
- Personalized Airflow: Experiment with the 100-level wind speed control to find your perfect airflow for any situation.
- Portability: Utilize the included lanyard to keep your fan secure and easily accessible while on the go.
- Battery Life: To maximize battery life, avoid constantly running the fan at its highest speed and cooling setting when not necessary.
- Versatile Use: This fan is designed for multiple environments, including shopping, working, and outdoor activities like hiking.
The H09 Handheld Fan is suitable for multiple usage environments.
11. Warranty and Support
For any questions, concerns, or technical support regarding your TENGKESi H09 Handheld Fan, please refer to the seller's contact information provided at the time of purchase. Keep your purchase receipt as proof of purchase.
For further documentation, you may reference the official user manual PDF: View User Manual (PDF)