LiTime L12V 300Ah Basic

Contents

LiTime 12V 300Ah LiFePO4 Lithium Battery User Manual

Model: L12V 300Ah Basic | Brand: LiTime

1. Introduction

Thank you for choosing the LiTime 12V 300Ah LiFePO4 Lithium Battery. This manual provides essential information for the safe and efficient use of your battery. Please read it thoroughly before installation and operation, and keep it for future reference.

LiTime 12V 300Ah LiFePO4 battery with safety warnings
LiTime 12V 300Ah LiFePO4 battery with integrated safety warnings.

2. Safety Information

WARNING: Risk of Fire, Explosion or Burns.

  • DO NOT Short circuit.
  • DO NOT Reverse connections from charger to battery.
  • DO NOT Disassemble.
  • DO NOT Throw into fire or incinerate.
  • DO NOT Heat above 70°C (158°F).

Disclaimer:

Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.

3. Product Overview

The LiTime 12V 300Ah LiFePO4 battery is a high-performance lithium iron phosphate battery designed for various applications requiring reliable and long-lasting power.

Key Features:

  • Operating Voltage: 12.8V
  • Nominal Capacity: 300Ah
  • Energy: 3840Wh
  • Max. Continuous Discharge Current: 200A
  • Max. Continuous Output Power: 2560W
  • Integrated 200A BMS: Provides multiple protections including overcharge, over-discharge, over-current, short circuit, and high temperature.
  • Long Lifespan: 4000-15000 cycles, offering over 10 years of service life.
  • Robust Design: IP65 rated for waterproof, dustproof, and salt spray protection.
LiTime 12V 300Ah LiFePO4 battery dimensions and M8 terminal bolt specifications
Physical dimensions of the LiTime 12V 300Ah battery and M8 terminal bolt details.

Additional Components:

  • M8-5/8" [16MM] Terminal Bolts: Used to secure multiple cable lugs. Recommended terminal torque: 106.2 to 123.9 inch-lbs / 12 to 14 Nm. Bolts can be replaced with M8 bolts of other lengths as needed.
  • Insulating Caps for Bolts: Cover the battery with insulating caps after tightening the bolts. If a cap melts, stop using the battery and contact service@litime.com for analysis.

4. Setup

Series/Parallel Connection

To connect batteries in series or parallel, ensure the following conditions are met:

  • Identical Batteries: Use batteries with the same capacity (Ah) and BMS (A).
  • Same Brand: Lithium batteries from different brands may have special BMS designs, so use batteries from the same manufacturer.
  • Purchased in Near Time: Ideally, purchase batteries within one month of each other to ensure similar characteristics.

Connection Limitations:

The LiTime 12V 300Ah battery supports connecting up to 16 identical batteries for:

  • Series Connection: Up to 4 batteries in series for a 48V (51.2V) battery system.
  • Parallel Connection: Up to 4 batteries in parallel for a 1200Ah battery system.
  • Combined Series-Parallel: Maximum 4P4S configuration (16 batteries total) for a total energy of 61.44 kWh.
Diagram showing correct series and parallel connection configurations for LiTime LiFePO4 batteries
Example diagrams for series and parallel battery connections.

5. Operating

Charging Methods

The LiTime LiFePO4 battery can be charged using various methods:

  • LiFePO4 Charger: Use a dedicated 14.6V 60A LiFePO4 charger.
  • Solar Panel + MPPT: Connect to a solar panel system with an MPPT charge controller (e.g., 30A MPPT for ≥1200W solar input).
  • Alternator + DC-DC Charger: For vehicle applications, use an alternator with a 60A DC-DC charger.
  • Generator: A generator combined with a 14.6V 60A charger can also be used.
Various charging methods for the LiTime LiFePO4 battery
Illustrations of different charging setups for the battery.

State of Charge (SOC) Estimation

The battery capacity can be roughly estimated by its resting voltage (not charging/discharging voltage). Since the voltage of each battery is slightly different, and measurements can be affected by instruments and temperature, the following parameters are for reference only. The actual SOC is based on the discharge capacity under load.

Resting Voltage: The voltage measured after the battery has been disconnected from the charger and loads with zero current, and left alone for 3 hours.

Graph and table illustrating State of Charge (SOC) vs. Voltage for LiFePO4 batteries
SOC (%) vs. Voltage (V) chart for reference.
SOC (%)VOLTAGE (V)
010 to 12
2513 to 13.15
5013.15 to 13.2
7513.3 to 13.33
100≥13.33

Note: Due to the characteristics of LiFePO4 batteries, the voltage measured during charging/discharging may not reflect the true voltage. After disconnecting from the power source, the battery voltage will gradually stabilize to its real voltage.

Applications

The LiTime 12V 300Ah LiFePO4 battery is versatile and suitable for a wide range of applications:

  • RV and Mobile Homes
  • Marine Boats and Trolling Motors
  • Solar Power Storage Systems
  • Off-Grid Solar Power Systems
  • Emergency Power Supply
  • Powering various appliances like Electric Kettles, Portable Freezers, Robot Pool Cleaners, Power Tools, Garden Tools, etc.
LiTime LiFePO4 battery used in various scenarios: yacht, RV/trailer, off-grid solar power system, and emergency power supply
The battery provides energy for life, anywhere, anytime.
LiTime LiFePO4 battery powering kitchen appliances with estimated run times
Example run times for common appliances (e.g., TV 100W for 38.4 hrs, Refrigerator 150W for 25.6 hrs).

6. Maintenance

Proper maintenance ensures the longevity and performance of your LiFePO4 battery:

  • Regular Inspection: Periodically check battery terminals for corrosion or loose connections. Clean as necessary.
  • Storage: If storing the battery for an extended period, ensure it is charged to approximately 50% SOC and stored in a cool, dry place within the recommended storage temperature range (-10°C to 50°C / 14°F to 122°F).
  • Avoid Deep Discharge: While LiFePO4 batteries tolerate deep discharge well, avoiding consistent deep discharge cycles can further extend their lifespan.
  • Temperature Management: Operate and charge the battery within the specified temperature ranges to prevent damage and ensure optimal performance.
  • BMS Protection: The integrated BMS protects against common issues. Do not attempt to bypass or modify the BMS.
Internal view of the LiTime LiFePO4 battery cells, highlighting 4000+ cycles, <=2% self-discharge, 500A peak, and 10+ years lifespan
The battery's internal structure and performance metrics.

7. Troubleshooting

What to do when the battery stops working?

If the battery stops working, cannot be charged, or its voltage drops below 9V, there is an 85% chance that the BMS has shut it off for protection. Follow these steps to attempt activation:

General Steps:

  1. Step 1: Cut off all connections from the battery.
  2. Step 2: Leave the battery aside for 30 minutes. The battery should automatically recover to a normal voltage (>10V) and can then be fully charged.

If the battery does not recover after the general steps, try one of the following activation methods:

  • Method 1: Use a charger with a lithium battery activation function to fully charge the battery.
  • Method 2: Connect a controller that supports 12V LiFePO4 battery charging to charge the battery for 3-10 seconds in sunny daytime.

8. Specifications

ParameterValue
Cell TypeLiFePO4
Nominal Voltage12.8V
Rated Capacity300Ah
Energy3840Wh
Internal Resistance≤40mΩ
Cycle Life≥4000 cycles (at 100% DOD), 6000 cycles (at 80% DOD), 15000 cycles (at 60% DOD)
BMS Board200A
Charge MethodCC/CV
Charge Voltage14.4 ± 0.2V
Recommended Charge Current60A (0.2C)
Max. Continuous Charging Current200A
Max. Continuous Discharge Current200A
Max. Discharge Current (5 seconds)400A
Surge Discharge Current800A@1 second
Max. Continuous Output Power2560W
Max. Expansion (Parallel & Series)4P4S
Dimension (L*W*H)52.2*23.7*21.8cm (20.55*9.33*8.58 inch)
Weight27.16Kg
Housing MaterialABS
Recommended Terminal Torque106.2 to 123.9 inch-lbs / 12 to 14 Nm
Protection ClassIP65
Charging Temperature Range0°C to 50°C / 32°F to 122°F
Discharging Temperature Range-20°C to 60°C / -4°F to 140°F
Storage Temperature Range-10°C to 50°C / 14°F to 122°F
CertificationsFCC, CE, RoHS, UN38.3

9. User Tips

  • Always use appropriate cable gauges for your connections to prevent overheating and ensure efficient power transfer.
  • When connecting multiple batteries, ensure all batteries are at a similar state of charge before making connections to avoid current imbalances.
  • Consider installing a battery monitor to keep track of voltage, current, and state of charge for optimal performance and longevity.
  • For cold weather operation, ensure the battery is warmed to above 0°C (32°F) before charging to prevent damage.

10. Warranty & Support

The LiTime 12V 300Ah LiFePO4 Lithium Battery comes with a 5-year warranty.

For detailed instructions, technical support, or warranty claims, please refer to the official user manual PDF or contact LiTime customer service.

A detailed user manual (PDF) is available for download here.

Manufacturer Contact: service@litime.com

Website: www.litime.com

11. Disposal Information

Lithium-ion batteries contain materials that require special handling for disposal. Do not dispose of the battery with general household waste.

Please check with your local authorities or recycling centers for information on proper disposal and recycling of lithium-ion batteries in accordance with applicable legal requirements.

© 2024 LiTime. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.