1. Introduction
This manual provides detailed instructions for the Dooya DC2700AM, DC2760AM, and DC2702D rolling code remote controls. These remote controls are designed to operate Dooya electric curtain motors and tubular motors, offering convenient control over your automated window treatments. Please read this manual thoroughly before use to ensure proper setup and operation.
2. Product Variants
The Dooya rolling code remote controls are available in several models, each offering different channel capabilities:
- DC2700AM: Single-channel remote control.
- DC2760AM: Double-channel remote control, allowing control of two separate motors or groups.
- DC2702D: 15-channel remote control with an LCD display, capable of controlling up to 15 individual motors or groups.




3. Specifications
| Feature | Specification |
|---|---|
| Material | Plastic |
| Dimensions (approx.) | 13 cm (Length) x 4.5 cm (Width) |
| Origin | Mainland China |
| Voltage | 3V |
| Frequency | 433.92 MHz |
| Chemicals of Concern | None |

4. Package Contents
Upon opening the package, you should find the following items:
- Dooya Rolling Code Remote Control (DC2700AM, DC2760AM, or DC2702D model)
- Wall mount bracket
- Screws and wall anchors for mounting
Note: Batteries are not included due to shipping restrictions and must be purchased separately.
5. Setup
5.1 Battery Installation
- Gently slide open the battery compartment cover on the back of the remote control.
- Insert the required batteries (typically AAA, not included) into the compartment, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.

5.2 Pairing with Motor
The remote control must be paired with your Dooya electric curtain or tubular motor. The "Set Key" located inside the battery compartment is used for this process. Refer to your specific motor's instruction manual for detailed pairing procedures, as these can vary by motor model. Generally, the process involves:
- Ensure the motor is powered on.
- Press the "Set Key" on the remote control (often a small button inside the battery compartment, as shown in Figure 5.1).
- Follow the motor's instructions to put it into pairing mode (e.g., pressing a button on the motor head).
- Confirm successful pairing, usually indicated by a jog or movement of the motor.
Important: This Dooya Rolling Code remote is only compatible with Dooya Rolling Code version curtain motors and tubular motors.
6. Operation
Once paired, you can use the remote control to operate your motor(s).
6.1 Basic Controls (All Models)
- Open (开): Press this button to open the curtain or raise the blind.
- Stop (停): Press this button to stop the curtain or blind at its current position.
- Close (关): Press this button to close the curtain or lower the blind.

6.2 Channel Selection (DC2760AM, DC2702D)
For multi-channel remotes (DC2760AM and DC2702D), you can select the desired channel to control specific motors or groups.
- Channel - (通道-): Decreases the selected channel number.
- Channel + (通道+): Increases the selected channel number.
The DC2702D model features an LCD display that shows the currently selected channel number, making it easy to manage multiple devices.
7. Maintenance
7.1 Battery Replacement
When the remote control's range decreases or it becomes unresponsive, it's likely time to replace the batteries. Follow the battery installation steps in Section 5.1 to replace the old batteries with new ones.
7.2 Cleaning
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing or buttons.
8. Troubleshooting
- Remote not responding:
- Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
- Ensure the remote is within range of the motor.
- Verify that the remote is correctly paired with the motor (refer to Section 5.2 and your motor's manual).
- Motor not moving as expected:
- Confirm that the correct channel is selected on multi-channel remotes.
- Check the motor's power supply.
- Consult the motor's instruction manual for motor-specific troubleshooting.
9. User Tips
- Always ensure you purchase the correct "Rolling Code Version" remote for compatibility with your Dooya motors.
- Keep spare batteries on hand for quick replacement when needed.
- For multi-channel remotes, clearly label which channel controls which motor for easier management.
10. Warranty and Support
For warranty information, technical support, or further assistance, please contact the seller or the official Dooya customer service. Keep your purchase receipt as proof of purchase.