1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of the EXFO FTB-1 FTB-720-238-E1 OTDR MAXTESTER. This device is a high-performance Optical Time Domain Reflectometer designed for comprehensive fiber optic network testing at 1310nm and 1550nm wavelengths.
2. Setup
2.1 Unpacking and Inspection
- Carefully unpack the EXFO FTB-1 unit and all accessories from its packaging.
- Inspect the unit for any signs of physical damage. If damage is found, contact your supplier immediately.
- Verify that all components listed in the packing list are present.
2.2 Powering On the Device
- Connect the provided power adapter to the device's power input port.
- Plug the power adapter into a suitable electrical outlet.
- Press the power button located on the device's control panel.
- The device screen will illuminate and display system information during startup.
2.3 Initial Configuration
Upon first power-on or after a factory reset, you may need to configure basic settings such as language, date, and time. Follow the on-screen prompts to complete the initial setup.
3. Operating Instructions
3.1 User Interface Overview
The EXFO FTB-1 features a touchscreen display and a physical keypad for navigation and data entry. The main screen typically displays measurement results, settings, and navigation menus.
3.2 Performing an OTDR Measurement
- Ensure the fiber under test is clean and properly connected to the OTDR port.
- From the main menu, select the OTDR application.
- Choose the desired wavelength (1310nm or 1550nm) and measurement parameters (e.g., pulse width, range, acquisition time).
- Initiate the measurement. The OTDR trace will be displayed on the screen.
- Analyze the trace for events such as splices, connectors, and fiber breaks.
- Save the measurement results as required.
3.3 Data Management
The device allows for saving, recalling, and exporting measurement data. Refer to the on-screen file management options for detailed instructions on handling your test results.
4. Maintenance
4.1 Cleaning the Device
- Use a soft, dry cloth to clean the exterior of the device.
- For the screen, use a specialized screen cleaner and a microfiber cloth.
- Keep the optical connectors clean using appropriate fiber optic cleaning tools to ensure accurate measurements.
4.2 Battery Care
- Charge the battery fully before first use and whenever the battery level is low.
- Avoid completely discharging the battery to prolong its lifespan.
- If storing the device for an extended period, ensure the battery is partially charged (around 50%) and store in a cool, dry place.
4.3 Software Updates
Periodically check the manufacturer's website for software updates to ensure optimal performance and access to new features. Follow the provided instructions for software installation.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery or power adapter issue | Ensure the power adapter is correctly connected and plugged in. Charge the battery for at least 30 minutes before attempting to power on again. |
| Inaccurate OTDR measurements | Dirty optical connectors, incorrect settings, or damaged fiber | Clean all optical connectors. Verify OTDR settings (wavelength, pulse width, range). Inspect the fiber for damage. |
| Screen unresponsive | Software glitch or touchscreen issue | Perform a soft reset (refer to the full manual for specific instructions). If the issue persists, contact technical support. |
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | FTB-1 FTB-720-238-E1 |
| Wavelengths | 1310nm / 1550nm |
| Type | OTDR MAXTESTER (Optical Time Domain Reflectometer) |
| DIY Supplies Category | Electrical |
| Origin | Mainland China |
| Condition | Used |
| Package Dimensions (L x W x H) | 40 cm x 35 cm x 30 cm |
| Package Weight | 2.0 kg |
7. User Tips
- Always ensure optical connectors are spotless before making any measurements to prevent inaccurate readings and potential damage.
- Familiarize yourself with the keypad shortcuts for quicker navigation and operation during field work.
- Regularly back up your measurement data to an external storage device or computer.
8. Warranty and Support
8.1 Warranty Information
All items are thoroughly tested and guaranteed to be 100% functional. They are covered by a DOA (Dead On Arrival) warranty. If you are not satisfied with your purchase, you may contact the supplier within 14 days of receipt for a refund or exchange. All returns must be reported and returned within the warranty period in the original package if possible.
Important: Any physical damage due to improper installation or improper use will void the warranty. All goods are checked for appearance and indicators before shipping. Sticky warranty labels must not be torn or removed, as this will void returns.
8.2 Technical Support
For technical assistance or further inquiries, please contact the supplier:
- E-mail: fuhuatest@yeah.net
- WhatsApp: +86 13632659106