SMAEL 1237

Contents

SMAEL 1237 Analog Digital Sport Watch

User Instruction Manual

Introduction

Thank you for choosing the SMAEL 1237 Analog Digital Dual Display Sport Watch. This manual provides detailed instructions on how to set up, operate, and maintain your watch. Please read this manual carefully to ensure proper use and to enjoy all the features of your new timepiece.

Three SMAEL 1237 watches in different colors on a concrete background

Image: SMAEL 1237 watches in various colors.

Product Features

  • 12-Digit LCD Display: Shows Hour, Minute, Second, Month, Day, and Week.
  • Daily Alarm and Hourly Chime.
  • 1/100 Second Chronograph with split functions.
  • 12/24 Hour Format selectable.
  • Full Auto Calendar.
  • EL Backlight for visibility in low light conditions.
  • Shock Resistant design.
  • 50M Water Resistance (WR 5BAR).

Watch Components and Button Functions

Familiarize yourself with the watch's buttons and their primary functions:

Diagram showing the watch face with labels for each button and display segment

Diagram: Watch face with labeled buttons and display functions.

  • LIGHT (A): Activates the EL backlight for 3 seconds.
  • MODE (B): Switches between different operational modes (Timekeeping, Chronograph, Alarm, Time Setting).
  • RESET (C): Used for adjusting settings, continuing chronograph, or zeroing seconds.
  • START/STOP (D): Used for starting/stopping chronograph, adjusting values in setting modes.

Operational Manual

Mode Switching

Press the MODE (B) button to cycle through the different modes:

  1. Timekeeping Mode (Normal Display)
  2. Chronograph Mode
  3. Alarm Mode
  4. Time Setting Mode

Time and Date Setting

  1. From Normal Timekeeping Mode, press MODE (B) three times to enter Time & Date Setting Mode. The seconds will start flashing.
  2. Press START/STOP (D) to zero the seconds.
  3. Press RESET (C) to move to the Hour setting. The Hour will flash.
  4. Press START/STOP (D) to adjust the Hour. (In this step, you can also switch between 12/24-hour format).
  5. Press RESET (C) to move to the Minute setting. The Minute will flash.
  6. Press START/STOP (D) to adjust the Minute.
  7. Press RESET (C) to move to the Month setting. The Month will flash.
  8. Press START/STOP (D) to adjust the Month.
  9. Press RESET (C) to move to the Date setting. The Date will flash.
  10. Press START/STOP (D) to adjust the Date.
  11. Press RESET (C) to move to the Weekday setting. The Weekday will flash.
  12. Press START/STOP (D) to adjust the Weekday.
  13. Press MODE (B) to exit the setting mode and return to Normal Timekeeping Mode.

Alarm Setting

  1. From Normal Timekeeping Mode, press MODE (B) twice to enter Alarm Mode.
  2. Press RESET (C) to make the Hour flash.
  3. Press START/STOP (D) to adjust the Hour for your alarm. Pay attention to AM/PM indication.
  4. Press RESET (C) to make the Minute flash.
  5. Press START/STOP (D) to adjust the Minute for your alarm.
  6. Press MODE (B) to exit the Alarm Setting Mode.

Alarm & Chime ON/OFF

  1. In Normal Timekeeping Mode, press MODE (B) twice to enter Alarm Mode.
  2. Press START/STOP (D) to toggle the Alarm (ALM) and Hourly Chime (SIG) ON or OFF.
  3. If the ALM/SIG symbol appears on the display, the function is ON; otherwise, it is OFF.

Chronograph Functions (Stopwatch)

  1. From Normal Timekeeping Mode, press MODE (B) once to enter Chronograph Mode.
  2. Press START/STOP (D) to start the stopwatch.
  3. Press START/STOP (D) again to stop the stopwatch.
  4. To continue timing after stopping, press RESET (C).
  5. To reset the stopwatch to zero, press RESET (C) while the stopwatch is stopped.

Backlight Operation

In any mode, press the LIGHT (A) button to illuminate the display for approximately 3 seconds.

Video: A short demonstration of the SMAEL 1237 watch features, including backlight and water resistance.

Maintenance

Water Resistance

Your SMAEL 1237 watch is water-resistant up to 50 meters (5 BAR), making it suitable for daily use, showering, and swimming in shallow water. However, do not press any buttons while the watch is wet or submerged in water, as this can compromise the water resistance and damage the internal components.

SMAEL 1237 watch on a wrist, showing the digital display

Image: SMAEL 1237 watch being worn.

General Care

  • Clean the watch regularly with a soft, dry cloth to remove dirt and sweat.
  • Avoid exposing the watch to extreme temperatures, direct sunlight for prolonged periods, or strong magnetic fields.
  • Keep the watch away from chemicals, solvents, and detergents, which can damage the case and strap materials.
  • If the watch gets wet, dry it thoroughly with a soft cloth.

Battery Replacement

The watch is powered by a standard watch battery. When the display dims or functions become erratic, it may be time to replace the battery. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is properly maintained.

Troubleshooting

  • Display is blank or dim: The battery may be low or depleted. Replace the battery.
  • Time is incorrect: Re-set the time and date following the instructions in the "Time and Date Setting" section. Ensure the 12/24-hour format is set correctly.
  • Alarm does not sound: Check if the alarm function is turned ON in the "Alarm & Chime ON/OFF" section. Ensure the alarm time is set correctly.
  • Water appears inside the watch: Immediately take the watch to a professional for inspection and repair. Do not attempt to open the watch yourself, as this will void any potential warranty and may cause further damage.

Specifications

Image showing product information and specifications for the SMAEL watch

Image: Product Information and Specifications.

Feature Specification
Brand Name SMAEL
Model Number 1237
Display Type Digital
Movement Digital
Case Material Plastic
Band Material Type Rubber
Dial Window Material Type Plastic
Water Resistance Depth 5Bar (50 meters)
Case Thickness 16mm
Band Width 24mm
Dial Diameter 50mm
Band Length 21cm
Clasp Type Buckle
Features Shock Resistant, LED Display, Week Display, Back Light, Chronograph, Alarm, Repeater
Battery Included Yes
Certification CE, RoHS

User Tips

  • Practice Button Functions: Take some time to familiarize yourself with each button's role in different modes to quickly access features like the stopwatch or alarm.
  • Check Water Resistance Limits: While the watch is 50M water-resistant, avoid pressing buttons underwater to prevent water ingress. It's suitable for swimming but not for diving or hot water activities like saunas.
  • Utilize the Backlight: The EL backlight is useful in dark environments. Remember it stays on for about 3 seconds per press.
  • Regular Cleaning: Keep the watch clean, especially the strap, to prevent skin irritation and maintain its appearance.
  • Battery Life: If the display starts to dim, consider replacing the battery promptly to ensure consistent performance.

Warranty and Support

For any issues not covered in this manual, or for warranty claims, please contact the seller or the official SMAEL customer support. Please refer to the official user manual PDF for additional details and support information: SMAEL 1237 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.